Denver IR-110 Bruksanvisning

Denver Radio IR-110

Läs gratis den bruksanvisning för Denver IR-110 (44 sidor) i kategorin Radio. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 8.5 recensioner. Har du en fråga om Denver IR-110 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/44

ENGLISH

GETTING STARTED

Powering ON/OFF

1. When you first connect the unit to the mains socket, the unit will be in STANDBY

mode after showing “Welcome to Internet Radio STARTING….” (F.1)(F.2)

2. Press the Standby

button on the unit or remote control to switch the unit on.

3. Press the Standby

button on the unit or remote control to switch the unit back

to standby on mode.

Selecting Modes

Press the MODE button repeatedly on the unit or remote control to switch between

Music player, DAB radio, FM radio, AUX In and Internet radio modes.

Welcome to

Internet Radio

STARTING

(F.1)

00/00/000

00 : 00

(F.2)

When the unit is idle for approximately 15 minutes, it will automatically switch to standby.

To switch the unit off completely, remove the mains plug from the main socket.

Please turn the unit off completely to save energy when not in use.

Network

1. During System Settings mode, press the / buttons to select Network and press the SELECT button to

confirm.

2. Press the / buttons to select from the following settings, and then press the SELECT button to confirm.

Network wizard SSID – select the desire wireless network.

Rescan – Scan for available networks.

Wired – select wired network.

Manual config – select wired/wireless network with DHCP enable/disable.

PBC Wlan setup Select PBC on the unit and press the PBC button on the modem device that you wish to

connect with. Press the SELECT button to continue.

View settings Display the setting on the unit.

Wlan region Select a country of your choice.

Manual settings Select wired/wireless network with DHCP enable/disable.

NetRemote

PIN Setup

To define a PIN number to be entered before being able to connect to the unit

remotely over a network

Network profile View the connected network.

Clear network

settings

To delete the connected network memory in Network profile.

Keep network

connected

To define whether remains connected to its network in Standby mode and when not in

Network radio mode. This is necessary for remote operation and audio streaming in Music

Player mode.

3. Press the BACK button on the unit or on the remote control to cancel the setting and return back to the

previous menu.

ENGLISH

After the system reset, all the tuned stations, DAB & FM preset stations will be erased.

Setting the Alarm

1. Press the ALARM button on the remote control, the display shows “Alarm (1 or 2): Off [hh:mm]”.

2. Press the / buttons to select the Alarm number (1 or 2) and then press the SELECT button to start the

setting of the following parameters.

For the following setting, press the / buttons to select then press the SELECT button to confirm.

Enable Off/ Daily/ Once/ Weekends/ Weekdays

Time (Alarm On time)

Mode Buzzer/ Internet radio/ DAB/ FM

Preset Last Listened/ (Preset station)

Volume Muted, 1-31

Save Save and confirm the alarm setting

Finally, select “Save” and press the SELECT button to save the alarm setting. When the alarm is set, the alarm icon

will appear on the display during standby mode.

To turn off the alarm when it sounds, press the STANDBY

or ALARM button.

During Standby mode, press the ALARM button repeatedly to turn the saved Alarm on/off.

Factory Reset

There may be times when you need to reset your unit back to the factory settings especially when you have moved

house. If you experience reception problems you may want to reset and try again.

If you move to another part of the country and pick up the local and national DAB+ stations in that area, your

previously tuned channels may no longer be available.

1. During System settings mode, press the / buttons to select “Factory reset”, and press the SELECT button to

confirm.

2. Press the / buttons to select Yes, and press the SELECT button to confirm or select No to cancel.

Produktspecifikationer

Varumärke:	Denver
Kategori:	Radio
Modell:	IR-110
Inbyggd display:	Ja
Vikt:	680 g
Bredd:	- mm
Djup:	- mm
Höjd:	- mm
Pekskärm:	Nej
Wi-Fi:	Ja
Ljudformat som stöds:	AAC, MP3, RealAudio, WMA
Frekvensband:	FM
Larmfunktion:	Ja
Inbyggda högtalare:	Ja
Antal inbyggda högtalare:	1
Volymkontroll:	Rotations-
Hörlursutgångar:	1
Typ av tuner:	Digital
Väckarklocka:	Ja
Klockfunktion:	Ja
Internetradio:	Ja
Produktens färg:	Svart
bruksanvisning:	Ja
Snooze funktion:	Ja
Skärmtyp:	LCD
Hörlursanslutning:	3,5 mm
MP3-uppspelning:	Ja
Uteffekt (RMS):	2 W
Nätverksansluten (Ethernet):	Ja
Likströmsingång:	Ja
Växelström Frekvens:	50 hz
AC-adapter inkluderad:	Ja
På / av-knapp:	Ja
Strömkälla:	DC
RDS radio ingår:	Ja
Vilolägestimer:	Ja
Aux-In:	Ja
Strömförsörjning ingångsspänning:	230 V
Typ av radio:	Internet