Digital Watchdog DWC-P336PARAMW Bruksanvisning
Digital Watchdog
ej kategoriserat
DWC-P336PARAMW
Läs gratis den bruksanvisning för Digital Watchdog DWC-P336PARAMW (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om Digital Watchdog DWC-P336PARAMW eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
DWC-P336PARAMW
Parapet mount bracket for white IP PTZ cameras
Quick Start Guide
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
NOTE: Download all your support materials and tools in one place.
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in the ‘Search by Product’ search bar. Results
for applicable part numbers will populate automatically based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
WHAT’S IN THE BOX
1x Teflon tape
12x hex screws (M10x30)
3x nuts (M6) 12x nuts (M10)
3x wrench screws (M6x30) 12x spring washers (M10)
1x hex Allen wrench (2.5) 12x flat washers (M10)
1x hex Allen wrench (5) 1x quick setup guide
Quick Start Guide
Rev Date: 01/20
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLING THE MOUNTING ACCESSORY
Roof mount installationParapet mount installation
Before the installation
1. The hardware necessary to install the mount depends on your installation
requirements.
2. The mount has pre-drilled holes for use with 3/8-16 (M10) type hardware
(recommended). Use as many of the mounting holes as possible.
3. Multiple fastening positions facilitate mounting flexibility. For a roof or
parapet installation, mount the camera using a minimum of five fasteners
on each side of the mounting plate.
4. Adding a sealant around the bolt holes between the mount and mounting
surface can prevent damage from water leakage
5. Be sure that the mount is installed in a location that can support the load.
All mounting hardware must have a minimum pullout strength of 600 lb
(272 kg) per bolt.
6. When mounting to wood, use screws long enough to penetrate at least
2.5” (64 mm).
7. When mounting to a steel structure, drill holes according to the
mounting pattern.
8. When mounting to masonry or concrete, use lead anchors or expansion
bolts installed according to the manufacturer’s instruction.
9. Run all necessary cabling to the location selected for the installation. Pass
the cables through the mount’s pole and connect to the camera as needed.
Mount hole size: inch (mm)
Produktspecifikationer
| Varumärke: | Digital Watchdog |
| Kategori: | ej kategoriserat |
| Modell: | DWC-P336PARAMW |
Behöver du hjälp?
Om du behöver hjälp med Digital Watchdog DWC-P336PARAMW ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Digital Watchdog Manualer
4 Oktober 2025
4 Oktober 2025
3 Oktober 2025
ej kategoriserat Manualer
- Bellari
- Lenovo
- Grundfos
- Monoprice
- OmniMount
- Ricoh
- Monacor
- SBS
- Watson
- Hobart
- IK Multimedia
- Cuisinart
- Scarlett
- Choice
- JANDY
Nyaste ej kategoriserat Manualer
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025