DJI OSMO Mobile Device Holder Bruksanvisning
Läs gratis den bruksanvisning för DJI OSMO Mobile Device Holder (4 sidor) i kategorin Stativ. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om DJI OSMO Mobile Device Holder eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Mobile Device Holder
OSMO
Quick Start Guide V1.0
Disclaimer and Warning
Congratulations on purchasing your new DJI product. The
information in this document affects your safety and your legal
rights and responsibilities. Read this entire document carefully
to ensure proper configuration before use. Failure to read
and follow instructions and warnings in this document may
result in serious injury to yourself or others, damage to your
DJI product, or damage to other objects in the vicinity. This
document and all other collateral documents are subject to
change at the sole discretion of DJI. For up-to-date product
information, visit http://www.dji.com and click on the product
page for this product.
By using this product, you hereby signify that you have read this
disclaimer and warning carefully and that you understand and
agree to abide by the terms and conditions herein. You agree
that you are solely responsible for your own conduct while using
this product, and for any consequences thereof. You agree
to use this product only for purposes that are proper and in
accordance with all applicable laws, rules, and regulations, and
all terms, precautions, practices, policies and guidelines DJI has
made and may make available.
DJI accepts no liability for damage, injury or any legal
responsibility incurred directly or indirectly from the use of
this product. The user shall observe safe and lawful practices
including, but not limited to, those set forth in this document.
Introduction
The Mobile Device Holder for the Osmo secures your smartphone
alongside the handle. Your smartphone can then serve as a
real-time viewnder with touchscreen camera control through
the DJI GO app.
Specications
Dimensions: 116 mm × 30 mm × 34 mm
Weight: 118 g
Max Clamping Dimensions: 160 mm × 77 mm
Installation
1. Attach the Mobile Device Holder to the rosette mount on the
Osmo handle. Tighten the knob to secure.
2. Unfold the arms and adjust the pads.
3. Place one end of your mobile device into the arms. Push the
other end, extending the arms until your entire mobile device
is seated in the Mobile Device Holder.
Produktspecifikationer
| Varumärke: | DJI |
| Kategori: | Stativ |
| Modell: | OSMO Mobile Device Holder |
Behöver du hjälp?
Om du behöver hjälp med DJI OSMO Mobile Device Holder ställ en fråga nedan och andra användare kommer att svara dig
Stativ DJI Manualer
31 December 2025
11 December 2024
2 Oktober 2024
17 September 2024
1 September 2024
30 Augusti 2024
16 Augusti 2024
13 Augusti 2024
12 Augusti 2024
8 Augusti 2024
Stativ Manualer
- Konig & Meyer
- Rode
- Vortex
- Glide Gear
- Redrock Micro
- FLM
- Bauhn
- Sevenoak
- Really Right Stuff
- Dorr
- Kodak
- FeiyuTech
- Tiltall
- Neewer
- FLOWCINE
Nyaste Stativ Manualer
4 April 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
4 April 2025
3 April 2025
2 April 2025
2 April 2025
2 April 2025