Doepfer A-136 Bruksanvisning


Läs gratis den bruksanvisning för Doepfer A-136 (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 37 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 19 recensioner. Har du en fråga om Doepfer A-136 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
doepfer System A - 100 Distortion / Waveshaper A-136
1
1. Introduction
Module A-136 is a distortion and waveshaping mo-
dule with extensive control possibilities. Different set-
tings of 5 distortion/waveshaping parameters enable a
lot of very complex and extreme waveform modificati-
ons.
The incoming audio or cv signal is divided into 3
sections: original, positive and negative component.
For the positive and negative component, clipping
levels (L) are defined. Only voltages beyond this level
effect the output signal. For each of the three sections
the positive or negative amplification (A) can be adju-
sted.
External control voltages can be used to alter both
clipping levels so that dynamic waveform changes are
possible.
The range of modification goes from simple soft or hard
clipping to completely altered waveforms where the
original signal is no longer recognizable.
Typical applications are audio distortion, and waveform
modification for audio signals as well as for control
voltages (LFO, ADSR, random etc.).
Output
+ A
Input
A-136
DIS
A
- A
+ L
- L
Ext. Level
Ext. Level


Produktspecifikationer

Varumärke: Doepfer
Kategori: Inte kategoriserad
Modell: A-136

Behöver du hjälp?

Om du behöver hjälp med Doepfer A-136 ställ en fråga nedan och andra användare kommer att svara dig