Eastron SDM630MCT-RC Bruksanvisning

Eastron mätning SDM630MCT-RC

Läs gratis den bruksanvisning för Eastron SDM630MCT-RC (2 sidor) i kategorin mätning. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 2.5 recensioner. Har du en fråga om Eastron SDM630MCT-RC eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
The primary current ranges from 1A to 5000A with 3 selectable
scales. The CT1 setting depends on the current input of
Rogowski coils.
If the input of coils is 500A, the CT1 should be set to 0.5kA.
If the input of coils is 1000A, the CT1 should be set to 1kA.
If the input of coils is 5000A, the CT1 should be set to 5kA.
This document provides operating, maintenance and installation
instructions. The SDM630MCT-RC is an innovative instrument
for measurement and recording electrical parameters. It is
with high quality and stability. The meter directly connects with
Rogowski coils for current measurement without integrator. It
measures and displays the characteristics of single phase two
wire(1p2w) and three phase four wire(3p4w) networks. The
measuring parameters include voltage(V), frequency(Hz),
current(A), power(kW/kVA/kVAr), import, export and total
energy(kWh/kVArh).
The unit can also measure Maximum demand current and
power, which is measured over preset periods of up to 60
minutes.
SDM630MCT-RC can communicate through the RS485 serial
port by MODBUS RTU protocol. Configuration is password
protected.
Neutral Current
4.2 Communocation
4.2.1 RS485 Address
4.2.2 Baud Rate
4.2.3 Parity
4.2.4 Stop Bits
4.3 CT
4.4 PT
Manual of Rogowski Coil
RS485
Load
RS485
Load
Terminals Capacity
Screw Torque
0.5~2.5mm²
1.5~2.5mm²
0.2Nm
0.2Nm
The Modbus conguration in (baud rate etc.) is congured
through the set-up screens.
Zhejiang Eastron Electronic Co.,Ltd .
Email: sales@eastrongroup com.
Web: www.eastron comgroup.
Tel: 86 573 83698881
No. 52, Dongjin Road, Nanhu, Jiaxing, Zhejiang, China
4.8 Supply System
4.9 CLR
4. 1 CT Reversal1
4.10 Change Password
Press to confirm the
selection.
4.6 DIT Demand Integration Time
4.7 Backlit Set-up
Wiring Reference
Coil cable Meter Terminal Screw Torque
Blue Wire(+) S1 0.2Nm
Black Wire(-) S2 0.2Nm

Produktspecifikationer

Varumärke: Eastron
Kategori: mätning
Modell: SDM630MCT-RC

Behöver du hjälp?

Om du behöver hjälp med Eastron SDM630MCT-RC ställ en fråga nedan och andra användare kommer att svara dig