Edelkrone FlexTILT Head PRO Bruksanvisning

Läs gratis den bruksanvisning för Edelkrone FlexTILT Head PRO (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 37 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 7 recensioner. Har du en fråga om Edelkrone FlexTILT Head PRO eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

TABLE OF CONTENTS

WHAT’S IN THE BOX & THE BASICS

ATTACHING THE 3/8”-16 MOUNTING WHEEL

MOUNTING YOUR FLEXTILT HEAD PRO

MOUNTING THE CAMERA TO YOUR FLEXTILT HEAD PRO

THE ADJUSTMENT/LOCKING KNOBS

ADJUSTING THE TENSION OF YOUR FLEXTILT HEAD PRO

CAUTIONS AND TIPS

USE WITHOUT A TRIPOD

1.

2.

3.

4.

5.

6.

7.

8.

Before operating your edelkrone,

please watch the user’s manual video from the link below

http://edel.kr/fthp

USER’S MANUAL

1. WHAT’S IN THE BOX & THE BASICS

1.

2.

3.

4.

5.

1/4” - 20 mounting screw

Level adjustment knobs (x2)

3/8” - 16 mounting screw

Reducer bushing/adapter*

Mounting wheel changing piece

6.

7.

8.

9.

10.

3mm adjustment joints (x2)

Spirit level

Pan marking

3mm allen wrench

3/8” - 16 mounting port

3. MOUNTING YOUR FLEXTILT HEAD PRO

1.

2.

3.

Place your FlexTILT Head PRO on the screw.

Rotate clockwise to tighten.

Continue rotating until it is tightened.

A detailed video explaining the mounting process can be found at:

http://edel.kr/fthp

1

1

2

5

6

7

8

9

10

2

A detailed video explaining the mounting process can be found at:

http://edel.kr/fthp

1.2.

4. MOUNTING THE CAMERA TO YOUR FLEXTILT HEAD PRO

When adjusting the height, adjust one point at a time. (a,b)

Unfold the FlexTILT Head PRO to

access the mounting wheel.

Attach your camera using

the mounting wheel.

a

b

1

2

FLEXTILT HEAD PRO

A detailed video explaining how to chage the mounting screws can be found at:

http://edel.kr/fthp

2. ATTACHING THE 3/8”-16 MOUNTING WHEEL

*1/4”-20 to 3/8”-16 mounting screw adapter and 1/4”-20 reducer bushing for mounting

port are provided. The adapter is mounted on the 3/8"-16 port at the bottom, which

can be removed it with the help of a coin.

4

3

FlexTILT Head PRO has two mounting screw options: 1/4”-20 & 3/8”-16.

Remove the indicated part with a screw driver.

Remove the 1/4”-20 mounting screw.

Attach the 3/8”-16 mounting screw.

Attach the part back in its place.

1.

2.

3.

4.

Produktspecifikationer