Edelkrone JibONE v2 Bruksanvisning
Edelkrone
Inte kategoriserad
JibONE v2
Läs gratis den bruksanvisning för Edelkrone JibONE v2 (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 9.5 recensioner. Har du en fråga om Edelkrone JibONE v2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
Before operating your edelkrone,
please watch the user’s manual video.
http://edel.kr/jbnv2
1. WHAT’S IN THE BOX & THE BASICS
2. MOUNTING ON A TRIPOD
3. MOUNTING THE BATTERY BRACKET
4. ATTACHING THE COUNTERWEIGHT
5. PULLING OUT THE EXTENSIONS
6. ADJUSTING THE OPERATION ANGLE
7. ATTACHING THE CAMERA
8. BALANCE ADJUSTMENT & SAFETY LOCK
9. EXTENSION LENGTH INDICATORS
10. COUNTERWEIGHTS
11. TENSION ADJUSTMENT
12. TURNING ON JIBONE v2
13. LOOSENING THE KNOBS
14. WARNINGS
15. START USING
TABLE OF CONTENTS
1. WHAT’S IN THE BOX & THE BASICS 2. MOUNTING ON A TRIPOD 3. MOUNTING THE BATTERY BRACKET 4. ATTACHING THE COUNTERWEIGHT 5. PULLING OUT THE EXTENSIONS 6. ADJUSTING THE OPERATION ANGLE 7. ATTACHING THE CAMERA
1.
2.
3.
4.
5.
6.
JibONE v2
Motor unit (with information screen,
On/Off button, DC in, shutter
trigger port, battery bracket port)
JibONE v2 length extension screws
Tension adjustment wheel
Angle adjustment knob
Camera plate (with 3/8” mounting
screw and spirit level)
7.
8.
9.
10.
11.
Body (3/8” tripod mounting port, 1/4“
accessory port, Cold Shoe)
Safety lock
Shutter trigger extension cable
Main counterweight (1 kg/2.2 lbs)
Counterweight (1 kg/2.2 lbs) (3 pcs.)
1
10 11
1
Battery Bracket
Motor Unit
9
2
3
4
8
7
65
1. Place the body of JibONE v2 on the tripod
making sure it's aligned.
2. Tighten it by turning the mounting wheel.
1. Align the main counterweight parts as shown.
2. Attach to JibONE v2 by turning the butterfly screw clockwise.
Attach the battery bracket to the motor unit using the screws included with
the battery bracket.
1. Lift the lever above to release the top arm.
2. Repeat below to release the bottom arm.
3. Grip the camera plate bar to pull out the extensions.
4. Extend the camera plate by loosening the butterfly
screw.
5. Push the levers back to their original positions.
1. Loosen the angle adjustment knob by turning counterclockwise.
2. Adjust your operation angle (JibONE v2 has five different operation angles).
3. Tighten the angle adjustment knob back.
1. Align your FlexTILT Head v3 or any tripod head with the camera plate as shown.
2. Tighten the mounting wheel.
3. Attach your camera to your FlexTILT Head v3 or any tripod head.
1
1
23
1
2
3
4
2
*Battery Bracket sold separately.
2
CAUTION
Keep hands clear of moving profiles.
A detailed video explaining the mounting process can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to mount the battery bracket can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to attach the counterweight can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to extend JibONE v2 can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to adjust the operation anglev can be found at:
http://edel.kr/jbnv2
A detailed video explaining how to attach the camera can be found at:
http://edel.kr/jbnv2
Produktspecifikationer
| Varumärke: | Edelkrone |
| Kategori: | Inte kategoriserad |
| Modell: | JibONE v2 |
Behöver du hjälp?
Om du behöver hjälp med Edelkrone JibONE v2 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Edelkrone Manualer
23 September 2024
23 September 2024
8 September 2024
8 September 2024
8 September 2024
8 September 2024
8 September 2024
7 September 2024
6 September 2024
6 September 2024
Inte kategoriserad Manualer
- Vemer
- IBasso
- Smith & Wesson
- Aqua Joe
- MARTOR
- Hämmerli
- Atdec
- Inglesina
- Macrom
- Moxa
- Musical Fidelity
- Millennia
- BERTSCHAT
- Severin
- Wire Technologies
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025