Edimax GS-1008E Bruksanvisning

Edimax Växla GS-1008E

Läs gratis den bruksanvisning för Edimax GS-1008E (9 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2 recensioner. Har du en fråga om Edimax GS-1008E eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/9

GS-1008E

Quick Installaon Guide

04-2016 / v1.0

Product Informaon

Package Contents

Before you start using this switch, please check if there is anything missing in

the package, and contact your dealer to claim the missing item(s):

 GS-1008E Switch

 Quick Installaon Guide

 Power Adapter

Hardware Overview

LED Status

LED Name

Light

Status

Descripon

PWR

Switch is on

O

Switch is o

LNK/ACT

Corresponding port is connected

O

Corresponding port is not connected

Flashing

Corresponding port is active and transferring

/receiving data.

Power Port

Power Indicator

LED Indicators

24 X 10/100/1000Mbps RJ-45 Ports

Operang Environment

This switch must be installed and operated within the limits of the specied

operang temperature 0 - 40°C (32 - 104°F) and humidity (10 - 90%

non-condensing).

- Do not place objects on top of the unit.

- Do not obstruct any vents at the sides of the unit.

- Do not posion the unit close to any heang source such as a heater,

radiator or in direct exposure to sun.

- Take care to ensure the unit does not come into contact with water.

Consider using a dehumidier to reduce humidity and prevent moisture

entering the unit.

Connecng to network devices

The RJ-45 ports on the switch support Auto-MDI/MDI-X which allows either

straig -through or cross-over type cables to connect this switch to a ht

workstaon or switch.

Connect one end of the network cable to the RJ-45 port on the side panel, and

connect the other end of the network cable to the RJ-45 port on the network

device. Follow the same procedure to connect all RJ-45 ports of the switch.

The UTP network cables must comply with EIA/TIA 568 specicaons and

Category 5 standard for data transmission. The maximum length for a UTP

cable segment between the switch and connected devices is 100 meters

(300).

Once the network cable is connected to both ends and the aached network

device is powered on, the green LNK/ACT LED should be lit.

Produktspecifikationer

Varumärke:	Edimax
Kategori:	Växla
Modell:	GS-1008E
Bredd:	46 mm
Djup:	6 mm
Höjd:	28 mm
Internminnestyp:	SLC
Hållbarhetscertifikat:	RoHS
Antal per paket:	1 stuk(s)
Förvaringstemperatur:	-40 - 85 °C
Medeltid mellan fel (MTBF):	1000000 uur
Capaciteit:	0.512 GB
Läshastighet:	20.79 MB/s
Skrivhastighet:	7.637 MB/s
Minnesspänning:	3.3, 5 V
Stötmotstånd:	1500 G
Drifttemperatur (TT):	0 - 70 °C
Relativ luftfuktighet i drift (VV):	0 - 95 procent
Typ av flashminne:	IDE
Vibrationsmotstånd:	20 G