Electro Harmonix CNTL Knob Bruksanvisning
Electro Harmonix
Inte kategoriserad
CNTL Knob
Läs gratis den bruksanvisning för Electro Harmonix CNTL Knob (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 9 recensioner. Har du en fråga om Electro Harmonix CNTL Knob eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
CNTL KNOB
Dual Static Expression Knobs
Congratulations on your purchase of the Electro-Harmonix Cntl Knob! The
Cntl Knob is a compact, easy- -use utility pedal providing remote static to
knob control for devices with expression control jacks. With the Cntl
Knob, the user can set two preset values, representing two positions of a
traditional expression pedal. Use the Cntl Knob’s onboard footswitch to
toggle between the two knob settings.
It works great with any device featuring expression pedal input, an
including the Electro-Harmonix Grand Canyon® Delay and Looper Oceans ,
12® Dual Stereo Reverb, Superego+™ Synth Engine, Super Pulsar™
Tremolo and many other pedals and devices made by Electro-Harmonix
and other manufacturers.
-USING THE CNTL KNOB-
Connect the supplied Tip-Ring-Sleeve (TRS) cable to the Cntl Knob’s jack
and to the expression jack on the device you want to control. We
recommend the device be powered down while making the connection.
Connect an optional 9VDC, cen -negative power supply to the 9V power ter
jack at the top of the Cntl Knob for LED indication. 9V power only lights
the Cntl Knob ’s LEDs. Power is not required to use the expression knobs.
The Cntl Knob has 2 Expression knobs, 1 footswitch and one pushbutton
for TRS polarity. They work as follows:
EXP 1 Knob –The position of this knob determines the first expression
setting. The fully counter-clockwise position corresponds to the heel
position on a standard expression pedal while the fully clockwise position
corresponds to the toe position.
• The EXP 1 knob setting is active on the EXP OUT jack when the
LED located below the EXP 1 knob is lit.
EXP 2 Knob –The position of this knob determines the second
expression setting. The fully counter-clockwise position corresponds to
the heel position on a standard expression pedal while the fully clockwise
position corresponds to the toe position.
• The EXP 2 knob setting is active on the EXP OUT jack when the
LED located below the EXP 2 knob is lit.
Produktspecifikationer
| Varumärke: | Electro Harmonix |
| Kategori: | Inte kategoriserad |
| Modell: | CNTL Knob |
Behöver du hjälp?
Om du behöver hjälp med Electro Harmonix CNTL Knob ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Electro Harmonix Manualer
2 April 2025
2 April 2025
2 Januari 2025
30 December 2025
30 December 2025
30 December 2025
30 December 2025
5 December 2024
24 September 2024
24 September 2024
Inte kategoriserad Manualer
- First Alert
- American Audio
- Saramonic
- Technaxx
- Koliber
- Brinno
- Haier
- Tvilum
- Mean Well
- Texas Instruments
- Spanninga
- Nextorage
- Easyrig
- Kyocera
- Warmup
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025