Electro Harmonix Op-Amp Big Muff Pi Bruksanvisning

Läs gratis den bruksanvisning för Electro Harmonix Op-Amp Big Muff Pi (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6.5 recensioner. Har du en fråga om Electro Harmonix Op-Amp Big Muff Pi eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
Op-Amp Big Muff Pi
Congratulations on y r purchase the -Amp Big Muff, our faithful re-creation of ou of Op
the l circuit. The circuitry of the -Amp Big Muff sometimes also referred ate ‘70s Op
to as the IC or V4 Big Muff differs from the traditional transistor-based Big Muff
circuit in that it uses operational amplifiers (op-amps) to achieve its signature
sustaining distortion sound. With widely-sweeping tone controls and a character all
arsenal.
OPERATING INSTRUCTIONS
VOLUME Control Sets the output level
TONE Control Provides a range of sounds from high treble to deep bass. As you
turn the knob clockwise the treble increases and bass decrea ses.
TONE Switch Removes the TONE control from the circuit. This switch has been
improved over the original Op-Amp Big Muff in that the volume remains the same in
both positions.
FUZZ Control Adjusts the amount of sustain and distortion
Footswitch Status LED & When the LED is lit, the Big Muff effect is active. When
the LED is off, the Big Muff is in true bypass mode. The Footswitch toggles between
effect and bypass modes.
INPUT Jack This ¼” jack is the audio input to the Op-Amp Big Muff. The input
impedance presented at this jack is 55 kΩ.
AMP Jack This ¼” jack is the audio output from the Op-Amp Big Muff. When the
Big Muff is in bypass mode, the AMP jack is connected directly to the INPUT jack.
9V Power Jack The -Amp Big Muff is powered from a 9V battery or you can Op
use an optional 9VDC AC Adapter capable of delivering at least 25mA to the 9V power
jack, such as the EHX9.6DC-200. The AC Adapter must have a center negative plug.
The battery may be left in or taken out when using an AC Adapter. The -Amp Big Op
Muff has a current draw of approximately 5mA at 9VDC.
We recommend the Electro-Harmonix US96DC-200BI AC Adapter to power
your -Amp Big Muff. Op

Produktspecifikationer

Varumärke: Electro Harmonix
Kategori: Inte kategoriserad
Modell: Op-Amp Big Muff Pi

Behöver du hjälp?

Om du behöver hjälp med Electro Harmonix Op-Amp Big Muff Pi ställ en fråga nedan och andra användare kommer att svara dig