Electro Harmonix OD Glove Bruksanvisning

Electro Harmonix Inte kategoriserad OD Glove

Läs gratis den bruksanvisning för Electro Harmonix OD Glove (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 9.5 recensioner. Har du en fråga om Electro Harmonix OD Glove eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

OD GLOVE

Congratulations on your purchase of the OD Glove overdrive, a

versatile modern overdrive/distortion unit in a compact nano

enclosure. The OD Glove is capable of chunky high-gain distortion,

sweet overdrive, mild crunch, and even powerful clean-boost. An easy

to use but powerful tone control helps you dial in the right sound.

True-bypass switching keeps your original clean tone intact.

- CONTROLS -

GAIN Knob – Controls the amount of input gain and overdrive. As

you turn this knob clockwise, the OD GLOVE ranges from sweet

cleans to full-power distortion.

TONE Knob The TONE knob on the OD GLOVE filters out high –

frequencies. When fully clockwise, the full tonal range of the

overdrive comes through. As the knob is turned counter-clockwise,

high frequencies are rolled off. Use this to achieve a smoother tone or

to reduce any high-frequency harshness.

VOL Knob Sets the output level of the OD GLOVE. –

TONE SHIFT Switch This switch controls the mid-frequency –

emphasis of the TONE knob. Setting this switch to OFF creates a

flatter EQ, with some emphasis on low mids. Setting the SHIFT switch

to ON emphasizes mids and high mids. There is also a small increase

in volume when the switch is set to ON.

FOOTSWITCH and LED – The Footswitch selects whether the OD

GLOVE is engaged or in true bypass mode. When the effect is

engaged, the LED is lit.

INPUT Jack – This ¼” jack is the audio input for the OD GLOVE.

The input impedance is 300k . 

AMP Jack – This ¼” jack is the audio output from the OD GLOVE.

The output impedance depends on the VOLUME setting, ranging from

12k  to 100k .

9V Power Jack – The OD Glove can run off of a 9V battery or you

can use an optional 9VDC AC Adapter capable of delivering at least

50mA to the 9V power jack. We recommend the EHX9.6DC-200.

The AC Adapter must have a center negative plug. The battery may

be left in or taken out when using an AC Adapter. The OD Glove

draws 12mA at 9VDC. The maximum voltage that may be

connected to the 9V Power Jack is 10VDC.

INTERNAL VOLTAGE SWITCH The OD GLOVE includes an –

internal slide switch to change its internal power supply voltage from

9V to 18V. Operation at 18V results in a less compressed, more open

tone that may work better for some guitar/amplifier combinations.

Operation at 9V results in a tighter sound, and reduces the current

draw to 5mA. Experiment with the voltage setting at full volume to

find the best sound for your playing style. Please remember: do not

exceed 10VDC at the 9V Power Jack. The OD Glove generates the

18V internally.

To select the operating voltage, remove the four screws on the

bottom of the OD GLOVE and take off the bottom plate. There is a

slide switch near the input jack labeled “Voltage Select.” Slide this

switch to the right for normal 9V operation. Slide it to the left for 18V

operation. You do not need to change the battery or adapter when

changing the internal voltage.

- CHANGING THE BATTERY -

To change the battery, remove the four screws on the bottom of the

OD GLOVE and take off the bottom plate. The battery clip is in the

bottom of the unit. Take care not to touch the circuit board while

changing the battery in order to avoid damaging a component.

Produktspecifikationer

Varumärke:	Electro Harmonix
Kategori:	Inte kategoriserad
Modell:	OD Glove
Färg på produkten:	Chroom
Lämplig för:	Badkamerwastafel
Maximal varmvattentemperatur:	90 °C
Avstånd från pip till monteringsyta:	121 mm
Rekommenderat vattenflödestryck (max):	1000 kPa
Rekommenderat vattenflödestryck (min):	100 kPa