Electro Harmonix Triangle Big Muff Pi Bruksanvisning
Electro Harmonix
Inte kategoriserad
Triangle Big Muff Pi
Läs gratis den bruksanvisning för Electro Harmonix Triangle Big Muff Pi (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 13.5 recensioner. Har du en fråga om Electro Harmonix Triangle Big Muff Pi eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Triangle Big Muff Pi
Congratulations on your purchase of the Triangle Big Muff. It’s a faithful re-
creation of the original and dripping with vintage Electro-Harmonix DNA and
tone. Dubbed the Triangle Big Muff because of the layout of its Volume, Sustain
and Tone controls, this is the one that started it all circa 1969.
OPERATING INSTRUCTIONS
VOLUME Control – Sets the output level
TONE Control – Provides a range of sounds from high treble to deep bass. As
you turn the knob clockwise the treble increases and bass decreases.
SUSTAIN Control – Adjusts the amount of sustain and distortion.
Footswitch & Status LED –Use the footswitch to toggle between effect and
bypass. The Triangle Big Muff is active when the LED is lit. When the LED is off,
the pedal is in true bypass mode.
IN Jack Plug the output of your instrument or another effects pedal into the –
¼” kΩ.input jack. The input impedance presented at this jack is 122
OUT Jack OUT Connect the Triangle – Big Muff’s ¼” jack to the input of your
amplifier or another effects pedal. When the Triangle Big Muff is in bypass mode,
the OUT jack is connected directly to the IN jack. The output impedance is
nominally 25kΩ.
POWER
Powering the Triangle Big Muff Pi
The Triangle Big Muff Pi may be powered from a 9V battery or an optional 9VDC
AC Adapter such as the EHX9.6DC- or any Boss200
®
Ibanezor
®
style AC
adapters capable of delivering at least 3 Plug the output of the adapter into 0mA.
the 9V power jack located at the top of the pedal The battery may be left in or .
taken out when using an AC Adapter. The current draw is approximately 2.2mA
at 9VDC.
Please Note: Using the wrong adapter or a plug with the wrong polarity
may damage your Triangle Muff Pi and void the warranty.
Produktspecifikationer
| Varumärke: | Electro Harmonix |
| Kategori: | Inte kategoriserad |
| Modell: | Triangle Big Muff Pi |
Behöver du hjälp?
Om du behöver hjälp med Electro Harmonix Triangle Big Muff Pi ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Electro Harmonix Manualer
2 April 2025
2 April 2025
2 Januari 2025
30 December 2025
30 December 2025
30 December 2025
30 December 2025
5 December 2024
24 September 2024
24 September 2024
Inte kategoriserad Manualer
- Alula
- Hawk-Woods
- Gustavsberg
- Wharfedale
- Lenmar
- Winix
- Lockncharge
- Waltec
- Vornado
- Singer
- Natec
- 4smarts
- Topeak
- Toolit
- Maytronics
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025