Eliminator Lighting Stealth Spot Bruksanvisning

Läs gratis den bruksanvisning för Eliminator Lighting Stealth Spot (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 2 recensioner. Har du en fråga om Eliminator Lighting Stealth Spot eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

STEALTH SPOT

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Introduction:

The Stealth Beam is a DMX intelligent moving head unit. The Stealth Beam has 3 operating modes;

sound active mode, show mode, or controlled via DMX controller. The Stealth Beam has 2 DMX

Channel modes; 5 or 15 channels. The unit can be run as a stand alone unit or in a Master/Slave set

up. This unit has been tested and there is no assembly required. Follow the instructions on the fol-

lowing pages to operate your fixture. To enhance the beams effects you can use a fog machine.

CAUTION! Please read and understand these instructions before installing or operating this unit.

SPECIFICATIONS:

Model: Stealth Spot

Supply Voltage: 100V-240V 50/60Hz

LED: 1 x 60W White LED

Weight: 11lbs./ 5 kgs.

Size: 6.7” (L) x 9.4” (W) x 13.97” (H)

Fuse: 2 Amp

Power Consumption:90W

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 2 DMX Channel Modes:

5 Channel Mode &

15 Channel Mode

Gobos: 5 + Spot

Colors: 7 Colors + White

Warranty: 1 Year

CAUTION! Please read and

understand these instructions

before installing or operating

this unit.

Fuse Replacement:Locate and remove

the unit’s power cord. Once the cord

has been removed, the fuse holder is

located inside the power socket. Insert

a flat-head screw driver into the fuse

holder and gently pry out the holder.

Remove the bad fuse and replace with

a new one. The fuse holder has a built-in

second holder for a spare fuse.

Produktspecifikationer