Elro AS80PR11 Bruksanvisning


Sidor 4 English Säkerhet

Läs bruksanvisningen för Elro AS80PR11 gratis online eller ladda ner PDF:en. 19 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga

1
AS80PR11
PIR MotionDetector
Installation Instructions
General Introduction
This Detector is designed with a Passive Infra-Red (PIR) sensor and light sensor in
order to fulfill the purpose of security and home automation. It detects motion by
monitoring changes in infra-red radiation levels emitted by body heat.
2.
Prepare a CR123A battery. Do not insert the battery into the unityet.
3.
Log into theELRO Smart Home Alarmaccount from a webbrowser.
4.
Select “System” then “Add aDevice”.
ProductOverview
LED
(hidden
behind
PIR lens)
LED Indication
PIR Lens
Tamper Switch
/ Link Key
Battery
Fixing Screw
5.
Select “PIRDetector”.
Red LED
Usedtoindicate triggerevents,lowbatterypower,andwarmup
Green LED
Used to indicate key learning controls
Orange LED
Used to indicate no codes learned
Binding
1. Undo and remove the fixing screw from the bottom of the detector. Carefully
pull the bottom of the detector away from the rear cover and then slide down to
release the topclips.
6.
The following screen will appear. This means the gateway is entering binding
mode.

Betygsätt denna manual


Produktspecifikationer

Varumärke: Elro
Kategori: Säkerhet
Modell: AS80PR11

Behöver du hjälp?

Om du behöver hjälp med Elro AS80PR11 ställ en fråga nedan och andra användare kommer att svara dig