Enttec DIN RDS4 Bruksanvisning
Läs gratis den bruksanvisning för Enttec DIN RDS4 (8 sidor) i kategorin Lättnad. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 9 recensioner. Har du en fråga om Enttec DIN RDS4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
DIN RDS4 (72004)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
1 |
ID: 5928467
Document Updated: April 2021
DIN RDS4 – User Manual
4 way DMX/RDM splitter in compact 4-module DIN-rail form factor.
ENTTEC’s DIN RDS4 is a robust, reliable installation
grade 4 port DMX & RDM Isolated splitter engineered
to take any architectural, commercial or
entertainment project to the next level.
Use the DIN RDS4 to turn one DMX feed into 4,
eliminating the need to create long, complex DMX
chains. Each port is the beginning of a new chain.
Multiple RDS4’s can be chained together to create
as many outputs as you need.
1500V isolation between the DMX input, outputs and
between any individual port protects your DMX
source from power surges on the DMX line alongside
blocking stray voltage from crossing to other DMX
chains.
The DIN RDS4 is packed with installer friendly
features including a flexible 7-24VDC power input
range, removable terminal plugs for simple wiring,
and no configuration needed. All housed within a
compact, electrically insulated form factor with
flexible mounting options.
Features
1 DMX/RDM input & 4 DMX/RDM outputs.
Pluggable screw terminal connectors.
Forward facing LED status indicator to view
current DMX/RDM traffic.
Support for DMX512-A and ANSI E1.20 RDM.
Output refresh rate mimics the input.
Electrically insulated case material.
Surface or TS35 DIN rail mount.
No configuration required.
7V-24V DC power input.
1500V Opto-isolation between each DMX port to
protect against stray voltages on the DMX line.
Operating temp: -20°C to 50°C
Din Mount
DIN RDS4 (72004)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
2 |
ID: 5928467
Document Updated: April 2021
Content
Safety ............................................................................................................................................................................................................................ 2
Electrical safety ............................................................................................................................................................................................................................. 2
System Planning and Specification ................................................................................................................................................................................... 3
Protection from Injury During Installation ..................................................................................................................................................................... 3
Installation Safety Guidelines ............................................................................................................................................................................................... 3
Physical Dimensions ............................................................................................................................................................................................. 4
Mounting Options ................................................................................................................................................................................................... 4
Wiring Diagrams ...................................................................................................................................................................................................... 5
Functional features ...............................................................................................................................................................................................6
1>4 Splitter ...................................................................................................................................................................................................................................... 6
RDM (ANSI E1.20)........................................................................................................................................................................................................................... 6
Hardware features .................................................................................................................................................................................................6
LED status indicator ................................................................................................................................................................................................................... 6
Out of the Box ..........................................................................................................................................................................................................6
Screw Terminal Connectors...............................................................................................................................................................................6
Servicing, Inspection & Maintenance ........................................................................................................................................................... 7
Cleaning ............................................................................................................................................................................................................................................ 7
Package Contents .................................................................................................................................................................................................. 8
Ordering Information .......................................................................................................................................................................................... 8
Safety
Ensure you are familiarized with all key information within this guide and other relevant ENTTEC
documentation before specifying, installing, or operating an ENTTEC device. If you are in any doubt about
system safety, or you plan to install ENTTEC device in a configuration that is not covered within this guide,
contact ENTTEC or your ENTTEC supplier for assistance.
ENTTEC’s return to base warranty for this product does not cover damage caused by inappropriate use,
application, or modification to the product.
Electrical safety
This product must be installed in accordance with applicable national and local electrical and
construction codes by a person familiar with the construction and operation of the product and the
hazards involved. Failure to comply with the following installation instructions may result in death or
serious injury.
Do not exceed the ratings and limitations defined in the product datasheet or this document. Exceeding
can cause damage to the device, risk of fire and electrical faults.
Ensure that no part of the installation is or can be connected to power until all connections and work
is complete.
Before applying power to your installation, ensure your installation follows the guidance within this
document. Including checking that all power distribution equipment and cables are in perfect condition
and rated for the current requirements of all connected devices and factor in overhead and verify that
it is appropriately fused and voltage is compatible.
DIN RDS4 (72004)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
3 |
ID: 5928467
Document Updated: April 2021
Remove power from your installation immediately if accessories power cables or connectors is in any
way damaged, defective, shows signs of overheating or are wet.
Provide a means of locking out power to your installation for system servicing, cleaning and
maintenance. Remove power from this product when it is not in use.
Ensure your installation is protected from short circuits and overcurrent. Loose wires around this device
whilst in operation, this could result in short circuiting.
Do not over stretch cabling to the device’s connectors and ensure that cabling does not exert force on
the PCB.
Do not ‘hot swap’ or ‘hot plug’ power to the device or its accessories.
Do not connect any of this devices V- (GND) connectors to earth.
Do not connect this device to a dimmer pack or mains electricity.
System Planning and Specification
To contribute to an optimal operating temperature, where possible keep this device out of direct
sunlight.
Any twisted pair, 120ohm, shielded EIA-485 cable is suitable to transmit DMX512 data to or from the DIN
RDS4. The DMX cable should be suitable for EIA-485 (RS-485) with one or more low capacitance twisted
pairs, with overall braid and foil shielding. Conductors should be 24 AWG (7/0.2) or larger for mechanical
strength and to minimize volt drop on long lines.
A maximum of 32 devices should be used on a DMX line before re-generating the signal using a DMX
buffer/ repeater / splitter.
Always terminate DMX chains using a 120Ohm resistor to stop signal degradation or data bounce-back.
The maximum recommended DMX cable run is 300m (984ft). ENTTEC advises against running data
cabling close to sources of electromagnetic interference (EMF) i.e., mains power cabling / air
conditioning units.
This device has an IP20 rating and is not designed to be exposed to moisture or condensing humidity.
Ensure this device is operated within the specified ranges within its product datasheet.
Protection from Injury During Installation
Installation of this product must be performed by qualified personnel. If ever unsure always consult a
professional.
Always work with a plan of the installation that respects all system limitations as defined within this
guide and product datasheet.
Keep the DIN RDS4 and its accessories in its protective packaging until final installation.
Note the serial number of each DIN RDS4 and add it to your layout plan for future reference when
servicing.
Always use suitable personal protective equipment when installing ENTTEC products.
Once installation is completed, check that all hardware and components are securely in place and
fastened to supporting structures if applicable.
Installation Safety Guidelines
The device is convection cooled, ensure it receives sufficient airflow so heat can be dissipated.
Do not cover the device with insulating material of any kind.
Do not operate the device if the ambient temperature exceeds that stated in the device specifications.
Produktspecifikationer
| Varumärke: | Enttec |
| Kategori: | Lättnad |
| Modell: | DIN RDS4 |
Behöver du hjälp?
Om du behöver hjälp med Enttec DIN RDS4 ställ en fråga nedan och andra användare kommer att svara dig
Lättnad Enttec Manualer
23 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
Lättnad Manualer
- Panzeri
- Bosch
- Sengled
- Lirio By Philips
- Delta Dore
- Roland
- ActiveJet
- OK
- Enlite
- Zero 88
- Aquatica
- Wireless Solution
- Amaran
- Fotodiox
- Philips
Nyaste Lättnad Manualer
9 April 2025
9 April 2025
9 April 2025
8 April 2025
8 April 2025
8 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025