Ernitec 0070-08117 Bruksanvisning

Läs gratis den bruksanvisning för Ernitec 0070-08117 (4 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2 recensioner. Har du en fråga om Ernitec 0070-08117 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Special Announcement

For more information, please refer to website.

Fully understand this document before using this device, and

strictly observe rules in this document when using this device. If

you install this device in public places, provide the tip "You have

entered the area of electronic surveillance" in an eye-catching

place. Failure to correctly use electrical products may cause fire

and severe injuries.

It alerts you to moderate dangers which, if not

avoided, may cause minor or moderate injuries.

It alerts you to risks. Neglect of these risks may

cause device damage, data loss, device

performance deterioration, or unpredictable results.

It provides additional information.

ŸStrictly observe installation requirements when installing the

device. The manufacturer shall not be held responsible for

device damage caused by users' non-conformance to these

requirements.

ŸStrictly conform to local electrical safety standards and use

power adapters that are marked with the LPS standard when

installing and using this device. Otherwise, this device may be

damaged.

ŸUse accessories delivered with this device. The voltage must

meet input voltage requirements for this device.

ŸIf this device is installed in places with unsteady voltage, ground

this device to discharge high energy such as electrical surges in

order to prevent the power supply from burning out.

ŸWhen this device is in use, ensure that no water or any liquid

flows into the device. If water or liquid unexpectedly flows into

the device, immediately power off the device and disconnect all

cables (such as power cables and network cables) from this

device.

ŸDo not focus strong light (such as lighted bulbs or sunlight) on

ŸAvoid heavy loads, intensive shakes, and soaking to prevent

damages during transportation and storage. The warranty does

not cover any device damage that is caused during secondary

packaging and transportation after the original packaging is

taken apart.

ŸProtect this device from fall-down and intensive strikes, keep

the device away from magnetic field interference, and do not

install the device in places with shaking surfaces or under

shocks.

ŸClean the device with a soft dry cloth. For stubborn dirt, dip the

cloth into slight neutral cleanser, gently wipe the dirt with the

cloth, and then dry the device.

ŸDo not jam the ventilation opening. Follow the installation

instructions provided in this document when installing the

device.

ŸKeep the device away from heat sources such as radiators,

electric heaters, or other heat equipment.

ŸKeep the device away from moist, dusty, extremely hot or cold

places, or places with strong electric radiation.

ŸIf the device is installed outdoors, take insect- and moisture-

proof measures to avoid circuit board corrosion that can affect

monitoring.

ŸRemove the power plug if the device is idle for a long time.

ŸAll complete products sold by the manufacturer are delivered

along with nameplates, quick setup guide and accessories after

strict inspection. The manufacturer shall not be held

responsible for counterfeit products.

ŸThe manufacturer will update this manual according to product

function enhancement or changes and regularly update the

software and hardware described in this manual. Update

information will be added to new versions of this manual without

prior notice.

ŸThis manual may contain misprints, technology information that

is not accurate enough, or product function and operation

description that is slightly inconsistent with the actual product,

the final interpretation of company is as a standard.

ŸThis manual is only for reference and does not ensure that the

information is totally consistent with the actual product. For

consistency, see the actual product.

Precautions

Open the package, check the appearance of product for no

obvious damage, and confirm the item list for table 1-1 is

consistent.

Table 1-1Packing list

2.1 Device Ports

Component

Quantity

Remark

Vandal Dome Network Camera

Plastic anchor

Stainless self-tapping screw

Installation location sticker

Quick Setup Guide

1

3

3

1

1

NOTE

NOTE

this device. Otherwise, the service life of the image sensor may

be shortened.

ŸIf this device is installed in places where thunder and lightning

frequently occur, ground the device nearby to discharge high

energy such as thunder strikes in order to prevent device

damage.

L hexagonal wrench

1

CAUTION

WARNING

WARNING

CAUTION

1

Open Package Examination

1

Device Structure

2

Figure 2-1 Device ports

2.2Camera Dimensions

Figure 2-2 Dimensionsof Dome(Unit:mm）

Different devices may have different dimensions; Please

refer to the actual product.

NOTE

Auxiliary thread-line tool

Reset

button

Longpressthebuttonfor 5seconds to

restore the original settings.

Alarm/

Audio

Alarm

out/in

out A, alarmoutA

Applied

for alarm

function

out B, alarmoutB

G, ground

In, alarm in

Audio

out/in

In, audioin

Applied

for audio

function

Out, audio out

G, ground

Analog

video

CVBS, analog video output

G, ground

Network

access port

Connects to a standard Ethernet cable.

12Vpower

supply

The ports are 12V/ OUT/12V/IN.

Usestheto auxiliary thread-line tool

throughthecable

Therearetworubberstoppers, user

can use the tool (screw driver or L

hexagonal wrench )to pierce the stopper,

and plug all cords in.

Remark

Over cable

rubber

stopper

Table 2-1 Interface of camera

Port name

Description

φ140

57.5

109.5

100°

φ110

123°

Over

function-

cord rubber

stopper

NOTE

Different devices may have different device ports; Please

refer to the actual product.

Green terminal block 3.81-9P

Green terminal block 3.81-4P

1

1

Reset

Alarm/Audio

interface

Over-line

buckle

Network access

port

Over -line

buckle

12V power supply

interface

Over function-cord

rubber stopper

Overcable rubber

stopper

Vandal Dome Network Camera

Quick Setup Guide

Item no.: 0070-08117

Precautions

Produktspecifikationer