Eureka Spitfire 2 Bruksanvisning

Eureka tält Spitfire 2

Läs gratis den bruksanvisning för Eureka Spitfire 2 (2 sidor) i kategorin tält. Guiden har ansetts hjälpsam av 31 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 16 recensioner. Har du en fråga om Eureka Spitfire 2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Contents of Carry bag
Tent body
Tent fly
Pole bag: 2 poles with prebends to make hoops, 1 longer
(head-end pole) & 1 shorter (foot-end pole)
Stake bag: stakes & guyout cords
Setting up the Tent Body
1. Spread the tent body out, floor side down. Locate the
yellow webbing stake out loop, as this marks the head-end of
ground.
2. Assemble the two poles, placing the longer pole near the
head-end of the tent & the shorter pole near the foot area.
3.Starting near the head-end of the tent, insert the tip of the
long pole into the grommet (metal ring) located in the black
webbing stake out loop. Insert the other pole tip into the
grommet on the opposite side of the tent. Reach down to the
tent body & connect all of the black plastic clips to the pole.
4. Repeat the process near the foot-end of the tent with
second, shorter pole
5. To raise your tent, grasp the black webbing loop with the
side-release buckle at the tip of the foot-end. As you pull the
webbing, the poles will raise. When fully tensioned, the poles
will be upright. Securely stake the black webbing loop to the
ground.
6. Futher secure the tent to the ground by using stakes in the
black webbing loops at the base of each pole.
Attaching the Fly Sheet
1. Unfold the fly & drape it over the tent matching the
yellow webbing on the fly with the yellow webbing on the
tent body. Align and center the fly on the tent body so the
flys seams follow the tent bodys poles.
2. Clip together the side-release buckle on the yellow
webbing.
3. Locate the bright green webbing guyout loops on the
outside of the flysheet, reaching under the guyout loops,
wrap the hook/loop closure around the underlying pole to
secure the fly to the pole. Secure the guyout loops at both
the head-end & foot-end poles.
4. Clip together the side-release buckles in the black
webbing at the tip of foot-end.
5. Now clip the buckles at the base of the foot-end pole.
6. Further tension the fly by pulling the webbing through
the 4 side-release buckles you have closed.
7. Using stakes, secure the two remaining stake-out loops
on the fly to create your vestibules.
8. Guyouts: Attach the two provided guyout cords to the
green webbing guyout loops on the head-end pole. If you
expect severe weather, utilize the guyouts on the foot-end
pole. Get in the habit of always using the guyouts, even in
good weather.
Eureka! Set-Up Instructions
Spitfire Solo (#2628314)
Spitfire 2 (#2628318)
REV 082714
Special Feature:
This tent features a poke-up vent in the fly. Lift the vent
open & prop it open with the stay. One can access the
vent from inside the tent through the zipper located in
the ceiling.
OTHER FEATURES
7. The tent body will now be erect, properly tensioned,
and anchored to the ground.
v
e
n
t
o
u
t
o
f
v
i
e
w


Produktspecifikationer

Varumärke: Eureka
Kategori: tält
Modell: Spitfire 2
Färg på produkten: Zwart
Vikt: 20000 g
Bredd: 978 mm
Djup: 65 mm
Höjd: 575 mm
Förpackningens vikt: 27670 g
Förpackningens bredd: 1168 mm
Djuppackning: 280 mm
Förpackningshöjd: 856 mm
Skärm diagonal: 42 "
Upplösning: 1920 x 1080 Pixels
Pekskärm: Ja
Original bildförhållande: 16:9
USB uttag: Nee
Ethernet LAN: Nee
Betraktningsvinkel, horisontell: 178 °
Betraktningsvinkel, vertikal: 178 °
Typiskt kontrastförhållande: 4000:1
Ljusstyrka: 450 cd/m²
Antal HDMI-portar: 1
Audio-ingan (L, R): 1
DVI-port: Nee
Strömförbrukning (i standby): - W
Display, antal färger: 16.78 miljoen kleuren
HDCP: Ja
Strömförbrukning (när avstängd): 5.5 W
HD typ: Full HD
Displayteknik: LED
Respons tid: 8 ms
Pixelpitch: - mm
Grafikupplösningar som stöds: 720 x 480,720 x 576,1280 x 960,1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 720 (HD 720),1366 x 768,1440 x 900 (WXGA+),1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080),640 x 480 (VGA),800 x 600 (SVGA)
Panelens livslängd: 50000 uur
VESA montering: Ja
Panelmonteringsgränssnitt: 400 x 400 mm
Datorsystem: Nee
Integrerad TV-tuner: Nee
On Screen Display (OSD)-talen: CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, ITA, JPN
VGA (D-Sub) ingångsportar: 1
Antal högtalarutgångar: 1
On Screen Display (OSD): Ja
Antal skärmspråk: 8
Förvaringstemperatur: -20 - 50 °C
Förvaringsfuktighet: 10 - 95 procent
Viloläge: 7 W
Aktivt visningsområde (bxh): 930 x 523 mm
Produktdesign: Digitale signage flatscreen
AC-ingångsspänning: 100 - 240 V
AC-ingångsfrekvens: 50 - 60 Hz
Strömförbrukning (typiskt): 105 W
Drifttemperatur (TT): 0 - 40 °C
Relativ luftfuktighet i drift (VV): 20 - 80 procent
Harmoniserad systemkod (HS): 85285210

Behöver du hjälp?

Om du behöver hjälp med Eureka Spitfire 2 ställ en fråga nedan och andra användare kommer att svara dig