Exibel HB086B Bruksanvisning

Läs gratis den bruksanvisning för Exibel HB086B (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 3 recensioner. Har du en fråga om Exibel HB086B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

GREAT BRITAIN - CUSTOMER SERVICEcontact number: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk

English

1

23

4

Ver. 20150629

Bluetooth LED Keyboard

Art.no 18-8429 Model HP086BUK

38-6997, 38-6998 HB086B, HB086BDE

Please read theentire instruction manual before using theproduct and then

save it for future reference. We reserve theright for any errors in text or images

and any necessary changes made to technicaldata. In theevent of technical

problems or other queries, please contact our Customer Services.

Safety

• Do not subject thekeyboard to knocks andblows.

• Do not place thekeyboard where there is arisk that it may fall into water or

other liquids.

• Do not plug in or unplug theUSB cable with wethands.

• Do not place thekeyboard close to strong heat sources or expose it to direct

sunlight for prolonged periods.

• Never attempt to tamper with, repair or modify thekeyboard in anyway.

Thebuilt-in battery cannot be replaced.

• Use only theincluded USB cable for charging thekeyboard.

Buttons and functions

Establishing a Bluetooth connection with a computer, tablet

or mobile phone

1. Switch thekeyboard on using theon/off switch (1) on thebottom of

thekeyboard. Thestatus indicator will come on for afew seconds.

2. Press [ Fn ]+[ c ] simultaneously to make thekeyboard detectable for other

Bluetooth devices. Thestatus indicator will begin toflash.

3. Activate Bluetooth on thedevice you intend to connect to thekeyboard.

4. Thekeyboard will now appear on your device as “Bluetooth 3.0 Keyboard”,

selectit.

5. Apassword will now appear on your device. Writethepassword on

thekeyboard and press [ ENTER ].

6. Thestatus indicator will now stop flashing to indicate that thedevices are

now connected.

Note:

Thekeyboard can only be paired with one device at atime. If, for example,

you have thekeyboard paired with your iPad and then decide to pair it with

your mobile phone or computer instead, you can’t just reactivate theprevious

connection to youriPad. Youwill have to delete thekeyboard (Bluetooth 3.0

Keyboard) from thelist of Bluetooth devices connected to your iPad and then

carry out anew Bluetooth device search to re-establish theconnection.

Backlight

Note:

• Thekey backlight only works when thekeyboard is connected to aBluetooth

device.

• Thebacklight goes off after about 1 minute of inactivity and comes on again

when any of thekeys is pressed.

Thebacklight is controlled by thebacklightkey.

Press thekey repeatedly to select in

thefollowingorder:

• Switch thebacklighton

• Increase light intensity

• Switch thebacklightoff

To change the colour of the backlight

Hold in thebacklight key whilst simultaneously pressing [ ▲] or [ ▼ ] until

thedesired colour has been chosen.

The Fn key

You must hold in theFn key at the same time as you press one of thefunction

keys [ ►ll ] (play/pause), [ l◄◄] (change track)etc. inorder for them towork.

The @ sign in iOS

Power save mode

Thekeyboard will enter power save mode if it is switched on but has been

inactive for more than 15 minutes.

Holding down any button for 3 seconds will wake thekeyboardagain.

Care and maintenance

Wipe thekeyboard clean with adry cloth as and when required.

Troubleshooting guide

Thekeyboard

won’t turnon.

Thebattery in thekeyboard might be discharged,

chargethebattery.

Thekeyboard

doesn’twork.

• Make sure that theBluetooth connection has been

properly established. Referto theEstablishing

aBluetooth connection... sectionabove.

• Make sure that no other wireless devices are

interfering with thewireless keyboard connection.

• If thedevice that you are attempting to connect

thekeyboard to is already connected to another

Bluetooth device, this may impair or prevent

thekeyboard from pairing with thedevice.

Disconnect theother (disrupting) wireless device.

Certain special

character keys

do notwork.

• If theany of thekeys do not seem to work when

using thekeyboard, it could mean that thelanguage

setting in your smartphone or tablet is not

correctlyset. Checkthesettings in your device.

Disposal

This product should be disposed of in accordance with local regulations.

Ifyou are unsure how to proceed, contact your local council.

Specifications

Bluetooth 3.0

Range Max 10m

Battery 800mA Lithium

Charginginput ≥ 200mA

Time to full charge Approximately 5hours

Operating time with backlight < 5 hours

Operating time without backlight < 300days

Operating temperature −10 to 55°C

Size 28.1×13.5×0.5 cm (1.4 cm on back edge)

1. On/off switch

2. Status indicator

3. Micro-USB port for connecting

achargercable

4. Charging indicator

Operating instructions

Charging

Note: Thekeyboard should be charged for at least 4 hours before it is used for

thefirst time and even when it is used again after along period of disuse.

1. Connect theincluded charger lead to theMicro-USB port (3) on thebattery

pack and to acomputer or other USB charger.

2. The charging indicator (4) will shine red while the battery is charging and

change to green when the battery is fully charged.

3. Thestatus indicator light (2) flashes when thebattery needs charging.

Swedish, FinnishNorwegian

Produktspecifikationer