EXSYS EX-3517 Bruksanvisning
EXSYS
Kontroller
EX-3517
Läs gratis den bruksanvisning för EXSYS EX-3517 (4 sidor) i kategorin Kontroller. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 12.5 recensioner. Har du en fråga om EXSYS EX-3517 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
1
Thank you for purchasing this 4-Port SATA3 PCI PCIe Card (non-RAID). It is designed
to support up to 4 SATA3 ports with 1 built-in SATA3 Port Mulplier ). It (PM
supports 4 SATA3 devices over one single PCI Express Slot and provides an ideal
soluon to add more SATA drives for your system.
Features:
✓ Supports 2-lane PCIe Gen 2 up to 10Gb/s
✓ Provides 4 Internal SATA3 Host Ports
✓ 4 Ports with 2 Double Deck Connectors
✓ Supports up to 4 SATA Devices, no RAID Support
✓ Supports Low Prole Form Factor
✓ Supports SATA3 transfer rate of 6.0Gb/s
✓ Supports Nave Command Queuing (NCQ)
✓ Supports FIS-based switching with Port Mulpliers
✓ Co-resides with Motherboard IDE and SATA devices
✓ Supports AHCI (Advanced Host Controller Interface) Mode
✓ Supports Win 2003, 2008, XP, Vista, Win 7, 8 , 10, .x
Linux and Mac OS
EX- 3517
4-Port SATA3 P e (x2) Card (non-RAID) CI
1. Introducon
2. Board Layout
Low Profile
Bracket
Up: Port 2
Down: Port 1
Up: Port 4
Down: Port 3
Gen 2 PCIe (x2)
Golden Fingers
4-Port SATA3 PCIe (x2) Card
2
Note: Due to the limitaon of the Port Mulpliers, only Port 1
can be the System Boot Drive. Other ports won’t support Boot funcon.
1. Power down the peripherals, then the computer.
2. Remove the computer cover and save the screws.
3. Choose an unused PCI Express bus slot.
4. Unscrew and remove the slot cover. Retain the screw; you will use it when you install
the SATA3 PCIe Card.
5. Place the SATA3 PCIe Card into the slot. Carefully press the board into the slot unl it
seats rmly.
6. Secure the SATA3 PCIe Card with the slot cover screw.
7. Install the internal SATA cables from the SATA connectors to your SATA devices.
8. Carefully reinstall the computer cover. Insert and ghten the computer cover screws.
9. Power up the PC and observe the monitor. The BIOS lists all Serial ATA devices
aached to the SATA3 PCIe Card. For example:
If the informaon displayed on your monitor is correct (the installed devices are listed
with the correct device name, etc.), congratulaons! You have successfully installed the
SATA3 PCIe Card in your computer.
3. Hardware Installaon
Asmedia 106x SATA Controller Ver 1.50 AHCI Mode
Copyright (C) Asmedia Technologies, Inc. All Right
reserved. S.M.A.R.T. Supported
Using PCIE Gen2 p2-x2
Firmware version 150910_00_00_00
Port PMP Model
0 0 KINGSTON SHFS37A120G SATA3
4 0 KINGSTON SHFS37A120G SATA3
5 0 ST3000DM001-9YN166 SATA3
6 0 ST3000DM001-9YN166 SATA3
4-Port SATA3 PCIe (x2) Card
3
The SATA3 PCIe Card supports Advanced Host Controller Interface ( ) mode which gives AHCI
soware developers and hardware designers a standard method for detecng, conguring,
and programming SATA/AHCI adapters. It exposes SATA's advanced capabilies (such as hot
swapping nave command queuing) so it does not need extra drivers for the modern and
operang systems. The following table lists the operaon system supported:
Operang Systems
Support
Windows Server 2012
Yes
Windows Vista (x86, x64)
Yes
Windows 7 (x86, x64)
Yes
Windows 8.x (x86, x64)
Yes
Windows 10.x (x86, x64)
Yes
Mac OS
Yes
Linux Based
Yes (with Kernel 2.6.19 or later)
4 Soware Insta ons Win2000/XP/2003/Vista/Win7 . lla
Produktspecifikationer
| Varumärke: | EXSYS |
| Kategori: | Kontroller |
| Modell: | EX-3517 |
Behöver du hjälp?
Om du behöver hjälp med EXSYS EX-3517 ställ en fråga nedan och andra användare kommer att svara dig
Kontroller EXSYS Manualer
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
Kontroller Manualer
- Sony
- Nacon
- Cisco
- Key Digital
- Lab Gruppen
- Fusion
- Polsen
- SilverStone
- Boss
- ART
- 8BitDo
- Heath Zenith
- PDP
- Snakebyte
- CoolerMaster
Nyaste Kontroller Manualer
2 April 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
28 Mars 2025
27 Mars 2025
26 Mars 2025
2 Mars 2025