Extron ZipClip 100 Bruksanvisning

Läs gratis den bruksanvisning för Extron ZipClip 100 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 6.5 recensioner. Har du en fråga om Extron ZipClip 100 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
ZipClip 100 • Installation Guide
Getting Started
This manual contains installation instructions for the Extron ZipClip100.
The Extron ZipClip100 enables Extron products to be securely mounted on most surfaces
including racks, tables, and lecterns.
Figure 1. ZipClip 100
Mounting the ZipClip 100
The following diagrams illustrate how the ZipClip100 attaches to an under-desk mounting
surface using the four ZipClip100 mounting screws (included) (see figure 2) or onto a rack rail
(see on the next page).
figure 3
Figure 2. Under-desk Mounting
ZipClip 100 • Installation Guide (Continued)
© 2018 Extron Electronics — All rights reserved. www.extron.com
All trademarks mentioned are the property of their respective owners. 68-3262-01
Rev. A 02 18
Figure 3. Rack Rail Mounting
Attaching and Removing the ZipClip 100
To attach the product to the ZipClip 100:
1. Insert the bottom of the product down into the clip, starting with one end.
2. Pivot the other end down and press until the clip snaps into place.
To remove the product from the ZipClip 100:
1. Press the quick-release tab on the ZipClip 100.
2. Pivot the product and lift it out of the ZipClip 100.
Figure 4. Quick-Release Tab

Produktspecifikationer

Varumärke: Extron
Kategori: Inte kategoriserad
Modell: ZipClip 100

Behöver du hjälp?

Om du behöver hjälp med Extron ZipClip 100 ställ en fråga nedan och andra användare kommer att svara dig