Fantech WH01 Bruksanvisning
Fantech
hi-fi system
WH01
Läs gratis den bruksanvisning för Fantech WH01 (10 sidor) i kategorin hi-fi system. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2.5 recensioner. Har du en fråga om Fantech WH01 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/10
Thank you for purchasing FANTECH WH01 Wireless Bluetooth
Headphone.
Lift your limitations and enjoy the audio from Fantech WH01 wireless
bluetooth headphone. Move freely with compact design packed
with performance and uninterrupted high-quality sound.
Bluetooth version: Bluetooth V5.0
Effective range: 10m
Driver unit: 40mm
Speaker sensitivity: 103±3dB
Speaker frequency response: 20-20kHz
Speaker impedance: 32±15%Ω
Microphone sensitivity: -42±3dB
Microphone directivity: Omni directional
Microphone impedance: 2.2KΩ
Microphone dimension: Ø4.0*1.5mm
Working time: Up to 60 hours (vol 80%)
Standby time: Up to 200 hours
Charging time: approx 2 hours
Cord length: 2m
Weight: 252gr
Technical specification
Instruction manual Headphone overview LED indicator description
What’s included in the box
1. WH01 Wireless Blu eto oth Headphone
2. Audio cable
3. Type-C cha rgi ng cable
4. User manual
What's needed
1. Devices with Blue tooth audio capability
Wh01
WIRELESS HEADPHONE
Pairing status
Power ON
Bluetooth Mode
Low latency
mode
Incoming Call
status
Charging Status
Flashing Blue and Red LED
Solid Blue LED
Blue LED will flash slowly when playing.
The Blue LED stay on indefinitely when
paused.
Green LED will slowly flash when music
is playing, and will stay on indefinitely
when paused.
Blue LED will quickly flash.
Solid Red LED when charging. Red
LED will turn off when charging is
complete.
How to use
Turn ON
Long press for 3 seconds, then the headphones will turn on.
After powering on, the LED indicator will shine blue for 3 seconds.
Turn OFF
Long press for 3 seconds, the headphone will turn off, after the
LED indicator appears Red for 3 seconds.
Volume Adjustment
Short press and to control volume
Music Selection
Long press to skip to the next song
Long press for skip to the previous song
Play/Pause/Phone calls
Pause: Short press when playing music
Play: Short press when music is paused
Answer calls: Short press when there is an incoming call
Refuse to answer: Long press when there is an incoming call
When connected to Bluetooth, double pressing will re-dial the
last phone number in your call record.
Language switch
If the headphones are powered on and did’nt connect to any
device, double tap on the “M” button to switch language
between Chinese and English.
Siri / voice assistant access
When the headphones are connected to your cell phone, double
press ”M” to access SIRI / voice Assistant.
Connect two devices at once
This headphone supports multiple connections across 2 devices
and will not interfere with each other. This allows the user to
answer their phone from any paired device.
1. In the status of turn off, long press ON/OFF button for 3s to turn
on the headphone and connect it with the first smart phone.
2. Turn off the Bluetooth on your first phone, let the headphone in
pairing status to connect with the second device, turn on the
Bluetooth on your second smart phone, search WH01, click to
connect.
3. Turn on the Bluetooth on the first device, and find WH01 to
manually connect again. At this time, the headphone has
connected to two smart phones.
Low latency mode
After connecting the headphones to a smart phone, press the “M”
button for 3 seconds to enter low latency mode. After successfully
entering low latency mode, there will be an audible prompt, which
sounds like “du”, and the LED indicator will turn to green.
Bluetooth disconnected
In non-call status, long press and for 5 seconds simultaneously,
then the headphone will disconnect from all connected devices.
The LED indicator will begin to flash blue and green, alternately.
How to connect Warm tips
Attentions
Bluetooth connection
The headphone will enter into pairing mode automatically after
being turned on. Red and Blue colors will flash on the LED indicator.
Turn on the Bluetooth on your cell phone and search for WH01,
and then tap to connect. The Blue LED indicator will stay on
indefinitely after the headphones are successfully connected.
The Blue LED indicator will flash slowly when playing music.
Charging mode
When the battery is low, please charge the headphones. The
headphones will turn off automatically when charging. During
charging, the Red LED indicator will be lit, and will turn off after
the battery is fully charged.
When connecting the headphones to an IOS device, the current
power status of the headphones will appear in the right corner of
the IOS device screen. When the battery is low, the headphone
will use a voice prompt of “battery low”, to notify the user.
Line-in Mode
After plugging in the audio cable, the headphone will power
off and switch into “Line-in” mode, where music can be played
through the cable.
Note: If you want to listen to the music in Bluetooth mode, you
need to unplug the audio cable.
1. Please charge the headphone with 5V 1A/5V 2A charger, high
voltage may damage the headphohe
2. When the headphone has not been used for more than 3 months,
it needs to be charged before using.
3. When the headphone has not been used for a long time, we
suggest you to charge every 3 months to provide good
protection for the battery.
4. We suggest you fully charged the headphone for the first time
use.
1. Please keep or use the headphone in normal temperature,
avoid direct sunlight.
2. Please keep the headphone away from fire or other hot object.
3. Please keep the headphone away from damp place or
submerged in liquid, keep dry.
4. Please don’t try to use other method for charging other than
the USB charging cable we provide.
5. Please don’t disassemble, repair or modify.
Warning
1. If the battery is replaced improperly, there is a danger of
explosion. It can only be replaced with a battery of the same
type or equivalent. The battery (battery pack or assembled
battery) must not be exposed to the conditions such as sunlight,
fire, or similar overheating environment.
2. The device should not be exposed to water droplets or water
splashes. It should not be placed in objects such as vases or
similar objects filled with liquids.
3. This device is not a children’s toy. Children under the age of 14
need to be accompanied by parents to use.
4. Using headphones for a long time at high volume may cause
damage to your hearing.
Produktspecifikationer
| Varumärke: | Fantech |
| Kategori: | hi-fi system |
| Modell: | WH01 |
Behöver du hjälp?
Om du behöver hjälp med Fantech WH01 ställ en fråga nedan och andra användare kommer att svara dig
hi-fi system Fantech Manualer
27 September 2025
27 September 2025
27 September 2025
27 September 2025
27 September 2025
26 September 2025
26 September 2025
26 September 2025
26 September 2025
26 September 2025
hi-fi system Manualer
- Smart-AVI
- Sagem
- Vankyo
- Lotronic
- OneConcept
- TC Electronic
- JB Systems
- Vizio
- Duronic
- IFi Audio
- DPA
- JL Audio
- RCF
- Audizio
- HUMANTECHNIK
Nyaste hi-fi system Manualer
20 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
17 Oktober 2025
16 Oktober 2025
16 Oktober 2025