Festo DADP-SP-G9-6-F Bruksanvisning
Festo
Inte kategoriserad
DADP-SP-G9-6-F
Läs gratis den bruksanvisning för Festo DADP-SP-G9-6-F (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 3.5 recensioner. Har du en fråga om Festo DADP-SP-G9-6-F eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
DADP-SP-G9-...-F
Stop kit
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Assembly instructions
8195146
2023-07a
[8195148]
8195146
Translation of the original instructions
© 2023 all rights reserved to Festo SE & Co. KG
1
Applicable documents
All available documents for the product
è
www.festo.com/sp.
Document Product Contents
Operating instruction Mini slide DGSS –
Operating instruction Shock absorber DYEF, DYSS –
Tab. 1:
Applicable documents
2 Safety
2.1
Safety instructions
–Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended use
The stop kit in combination with a shock absorber on the mini slide DGSS cush-
ions its extended end position.
3 Additional information
–
Contact the regional Festo contact if you have technical problems
è
www.festo.com.
–
Accessories
è
www.festo.com/catalogue.
4 Product Range Overview
4.1
Scope of delivery
1
2
3
4
Fig.1
1
Screw (2x)
2
Stop (1x)
3
Stop element (1x)
4
Screw (2x)
4.2
Not in scope of delivery
5
6
Fig.2
5
Mini slide (1x)
DGSS
6
Shock absorber (1x)
DYEF-G8/DYSS-G8
5
Product design
Z
Fig. 3:
Product design
Z
Thread for shock absorber
6 Assembly
1
A
B
2
Fig. 4: Pushing in stop
1. Extend the slide[A] manually.
2. Slide the stop into the slot[B].2
3. Insert the screws into the holes of the stop .1 2
4. Slide the stop to the end of the slot[B].2
A
C
1
Fig. 5: Mounting stop
1.
Position the slide[A] so hole[C] is aligned with a screw .1
2.
Tighten the screw . Observe the tightening torque.1
DADP-SP-G9 -6 -10 -16 -20
Screw M2 x 6 M2.5 x 8 M2.5 x 8 M3 x 12
[Nm] 0.3 ±15% 0.5 ±15% 0.7 ±15% 0.9 ±15%
3.
Repeat this process for the second screw .1
C
3
Fig. 6:
Note the stop bar
•
When installing the stop element , note the position of the stop bar[C].3
3
D
A
Fig. 7:
Aligning stop element
1.
Retract the slide[A] manually.
2. Position the upper edge of the stop element at the level of the thread[D].3
3
A
C
Fig. 8:
Attaching stop bar
1. Push the stop element upwards to the stop.3
Ä
The stop bar[C] is in contact with the slide[A].
2. Hold this position.
4
3
A
Fig. 9: Mounting stop element
• Mount the stop element on the slide[A] with the screws . Observe the3 4
tightening torque.
DADP-SP-G9 -6 -10 -16 -20
Screw M2 x 8 M2.5 x 10 M3 x 10 M4 x 12
[Nm] 0.4 ±15% 0.9 ±15% 1.4 ±15% 2.0 ±15%
Produktspecifikationer
| Varumärke: | Festo |
| Kategori: | Inte kategoriserad |
| Modell: | DADP-SP-G9-6-F |
Behöver du hjälp?
Om du behöver hjälp med Festo DADP-SP-G9-6-F ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Festo Manualer
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
Inte kategoriserad Manualer
- Prowise
- Selec
- Viewsonic
- ARNOLD Lichttechnik
- Solid
- Lotus
- Digigram
- Munchkin
- Cool Head
- Martin Audio
- Finder
- On Air
- B-Speech
- Ag Neovo
- Cudy
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025