Festo PEV-1/4-WD-LED-230 Bruksanvisning

Läs gratis den bruksanvisning för Festo PEV-1/4-WD-LED-230 (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 3 recensioner. Har du en fråga om Festo PEV-1/4-WD-LED-230 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

PEV-1/4-WD-LED-230

Angled plug socket

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Assembly instructions

8189927

2023-12

[8189929]

8189927

Translation of the original instructions

© 2024 all rights reserved to Festo SE & Co. KG

1

Applicable Documents

All available documents for the product

è

www.festo.com/sp.

2Safety

2.1

Safety instructions

–Before working on the product: Switch off the power supply, ensure that it is off

and secure it against being switched on again.

2.2Intended use

The angled plug socket is a plug connector that can be assembled and connects

the pressure switch PEV-1/4-B(-OD), PEV-1/4-SC-OD or PEV-1/4-A- SW27-B-OD

with a controller.

2.3Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can

evaluate the work and detect dangers. The qualified personnel are trained in

electrical engineering.

3

Additional information

–Contact the regional Festo contact if you have technical problems

è

www.festo.com.

–Accessories and spare parts

è

www.festo.com/catalogue.

4Product Range Overview

4.1

Scope of delivery

123

4

5

6

Fig.1

1

Pressure screw (1x)

2

Washer (1x)

3

Seal (1x)

4

Central screw (1x)

5

Housing (1x)

6

Contact holder (1x)

with screw terminals,

LEDgreen, LEDyellow

4.2Not in scope of delivery

78

Fig.2

7

Pressure switch (1x)

PEV-1/4-B(-OD),

PEV-1/4-SC-OD

or PEV-1/4-A-SW27-B-OD

8

Cable (1x)

5Contact assignment

Pin allocationPinConnection

1Operating voltage

2N/C contact

3N/O contact

4LED

Earthing

Tab. 1:Contact assignment

Electrical connec-

tion1

Field device side

Circuit diagramElectrical connec-

tion2

Controller side

Tab. 2:Circuit diagram

LED greenYellow LEDMeaning

offyellow

light

Measured relative pressure is below the threshold value.

green

light

offMeasured relative pressure is above the threshold value.

Tab. 3:Switching status indication

6

Assembly

6.1Preparation

4

5

Fig.3

•

Screw the central screw out of the housing.45

5

6

Fig.4

•

Press the contact holder out of the housing.65

123

5

Fig.5

1.Unscrew the pressure screw.1

2.Remove the washer and the seal from the housing.235

Produktspecifikationer