Festo SDBT-BSW-1L-ZU-W-5-N-LE Bruksanvisning
Festo
Inte kategoriserad
SDBT-BSW-1L-ZU-W-5-N-LE
Läs nedan 📖 manual på svenska för Festo SDBT-BSW-1L-ZU-W-5-N-LE (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 11 personer och betygsatt med 4.6 stjärnor i genomsnitt av 6 användare
Sida 1/1
Translation of the original instructions
© 2020 all rights reserved to Festo SE & Co. KG
1 Applicable Documents
All available documents for the product www.festo.com/sp.è
2 Safety
2.1 Safety
– Before working on the electrics: switch off the voltage supply.
WARNING!
Risk of injury due to electric shock.
• For the electric power supply, use only PELV circuits that ensure a reliable
electric disconnection from the mains network.
• Observe IEC60204-1/EN60204-1.
2.2 Intended use
This product is intended for sensing the position of magnets (e.g. the piston posi-
tion) in Festo products. The device is intended for use in an industrial environ-
ment.
2.2.1 Area of application and approval
In combination with the UL inspection mark on the product, the information in this
section must also be observed in order to comply with the certification conditions
of Underwriters Laboratories Inc. (UL) for USA and Canada.
UL approval information
Product category code NRKH, NRKH7
File number E232949
Considered standards UL 60947-1, CAN/CSA C22.2 No. 60947-1
UL 60947-5-2, CAN/CSA C22.2 No. 60947-5-2
UL mark
Industrial Control Equipment
2MD1
Tab. 1
Only for connection to a NEC/CEC Class 2 supply.
3 Electrical connection
Circuit diagrams
SDBT-BSW-…-PU-…-M12 SDBT-BSW-…-PU-…-LE
SDBT-BSW-…-NU-…-M12 SDBT-BSW-…-NU-…-LE
SDBT-BSW-…-ZU-…-LE
Tab. 2
4 Mechanical installation
Fig. 1 Mechanical installation
5 Operating conditions
If the SDBT-BSW-...-PU or SDBT-BSW-...-NU is aligned at a right angle to the weld-
ing electrode or cable, it can result in maloperations in a limited range (applica-
tion-dependent).
Fig. 2 Operating conditions
Possible remedy:
– Adjust the distance between the proximity sensor and the source of malfunc-
tion (±20mm).
– Adjust the angle between the proximity sensor and the source of malfunction
(±20°).
– Adjust the strength of the welding current.
– On DW/DWA/DWB cylinders: mount sensor in a different position.
6 Technical data
6.1 Technical data UL
SDBT-BSW-…
Operating voltage range [VDC] 10…30
Ambient temperature [°C] –25…+80
NEMA enclosure type number
(Enclosure Type Rating)
Type 1
Tab. 3
6.2 Technical data, general
SDBT-BSW- - PU/NU ZU…
Operating voltage range [VDC] 10…30
Max. output current [mA] 100 80
Max. switching capacity [W] 2.8 1.9
Frequency of welding process
MFDC
[Hz] 1000 –
Frequency of welding process
AC
[Hz] 50…60
Ambient temperature [°C] –25…+85
Ambient temperature with flex-
ible cable installation
[°C] –5…+80
Degree of protection IP65, IP68
Tab. 4
8140618
SDBT-BSW-...
Proximity sensor
8140618
2020-07c
[8140620]
Operating instructions
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com
Produktspecifikationer
| Varumärke: | Festo |
| Kategori: | Inte kategoriserad |
| Modell: | SDBT-BSW-1L-ZU-W-5-N-LE |
Behöver du hjälp?
Om du behöver hjälp med Festo SDBT-BSW-1L-ZU-W-5-N-LE ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Festo Manualer
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
Inte kategoriserad Manualer
- Inte kategoriserad Akg
- Inte kategoriserad Magic Care
- Inte kategoriserad Cre8audio
- Inte kategoriserad Namco Bandai Games
- Inte kategoriserad Nordic Winter
- Inte kategoriserad Procare
- Inte kategoriserad Sekonic
- Inte kategoriserad Mamas & Papas
- Inte kategoriserad DBX
- Inte kategoriserad Y-brush
- Inte kategoriserad Phoenix
- Inte kategoriserad Morphy Richards
- Inte kategoriserad Siemon
- Inte kategoriserad Victorio
- Inte kategoriserad Auray
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025