Flashforge Creator 3D Bruksanvisning
Flashforge
3D-skrivare
Creator 3D
Läs gratis den bruksanvisning för Flashforge Creator 3D (31 sidor) i kategorin 3D-skrivare. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 12 recensioner. Har du en fråga om Flashforge Creator 3D eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/31
2
Contents
4
Secon 1: the Box?What’s Included in
5
Secon 2: Unboxing
8
Secon 3: Inial Hardware Installaon
11
Secon 4: Soware Installaon
17
Secon 5: USB Connecon & Temperature Seng
22
Secon 6: Filament
22
Installing the Filament
23
Feeding the Filament Using LCM Screen
24
Withdrawing the Filament Using LCM Screen
25
Seng the Parameter
26
Inial Print
28
Dual Extruder Print
3
WARNING:
Prior to powering on the Creator, make sure the power supply switch is set
to 115v if you are located in the United States. For other countries, please
refer to your country standards. Failure to do so will damage the
motherboard. For instrucons on how to do this, please refer to page 8.
Precauon s:
Please make sure to read this page carefully prior to seng up and operang the Creator.
The Creator is very sensive to stac electricity, so please make sure you contact a grounded
object before operang the machine.
efore repairing or making any alteraons to the Creator, it is essenal that the machine is B
turned o, and the power cord is unplugged.
he Creator operates at very high temperature; allow the nozzle, extruded plasc and heang Ta
plate to cool before touching.
ome plasc laments may give o a slight odor when heated. Because of this, the machine S
should always operate in a well-venlated area.
o not wear gloves when operang or repairing, as entanglement may occur and cause injury. D
o not leave the machine unaended when in operaon. D
Produktspecifikationer
| Varumärke: | Flashforge |
| Kategori: | 3D-skrivare |
| Modell: | Creator 3D |
Behöver du hjälp?
Om du behöver hjälp med Flashforge Creator 3D ställ en fråga nedan och andra användare kommer att svara dig
3D-skrivare Flashforge Manualer
27 September 2024
21 September 2024
14 September 2024
11 September 2024
11 September 2024
25 Augusti 2024
25 Augusti 2024
24 Augusti 2024
22 Augusti 2024
20 Augusti 2024
3D-skrivare Manualer
- Dimension
- Artillery
- HP
- BFB
- Easy Threed
- Wasp
- LulzBot
- 3D Systems
- PP3DP
- Anker
- Polaroid
- Raise3D
- Velleman
- Renkforce
- Weistek
Nyaste 3D-skrivare Manualer
2 Mars 2025
27 Januari 2025
25 Januari 2025
17 Januari 2025
17 Januari 2025
31 December 2025
27 December 2024
27 December 2024
27 December 2024
27 December 2024