Fluke 2AC Bruksanvisning

Läs gratis den bruksanvisning för Fluke 2AC (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 28 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2 recensioner. Har du en fråga om Fluke 2AC eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

2AC

VoltAlert

Instruction Sheet

Read First: Safety Information

WX Warning

To avoid possible electric shock or personal injury:

●If the Tester is used in a manner not specied by the manufacturer,

protection provided by the Tester may be affected.

●Test on a known live source within the rated ac voltage range of the

product, both before and after use to ensure unit is in good working

condition.

●When using the Tester, if tip does not glow, voltage could still be

present. The Tester indicates active voltage in the presence of

electrostatic elds of sufcient strength generated from the source

(MAINS) voltage. If the eld strength is low, the Tester may not provide

indication of live voltages. Lack of an indication occurs if the Tester is

unable to sense the presence of voltage which may be inuenced by

several factors including, but not limited to:

●Shielded wire/cables

●Thickness and type of insulation

●Distance from the voltage source

●Fully-isolated users that prevent an effective ground

●Receptacles in recessed sockets/ differences in socket design

●Condition of the Tester and Batteries

●Do not use if the Tester appears damaged or if the Tester is not

operating properly. Specically examine the probe tip for cracks or

breakage before use. If in doubt, have the Tester serviced.

●Do not apply more than the rated voltage as marked on the Tester.

●Use caution with voltages above 30 V ac as a shock hazard may exist.

●Comply with local and national safety requirements.

●Use proper protective equipment as required by local or national

authorities.

Table 1. Symbols

T

Double Insulated.

X

Hazardous Voltage. Risk of electric shock.

W

Risk of danger. Important information. See Instruction Sheet.



Conforms to relevant Canadian and US Standards.



Conforms to relevant European Union directives.



Conforms to relevant Australian standards.



Do not dispose of this product as unsorted municipal waste. Go to Fluke’s website

for recycling information.

CAT IVEquipment is designed to protect against transients from the primary supply level.

(i.e. - electricity meter or overhead /underground utility service).

August 2010 Rev. 1, 7/11

© 2010-2011 Fluke Corporation. Specications are subject to change without notice. All rights

reserved. Printed in China.

FOR USE BY COMPETENT

PERSONS

Anyone using this instrument should be

knowledgeable and trained about the risks

involved with measuring voltage, especially

in an industrial setting, and the importance of

taking safety precautions and of testing the

instrument before and after using it to ensure

that it is in good working condition.

Produktspecifikationer