Fluke 9143 Bruksanvisning
Läs gratis den bruksanvisning för Fluke 9143 (120 sidor) i kategorin temperaturkontroller. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 1.5 recensioner. Har du en fråga om Fluke 9143 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/120
9142-B-P-156/AF
Field Metrology Well
Technical Guide
May 2013
© 2013 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
Distribution is limited to DoD and U.S. DoD contractors only.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
1.0 Warranty: Each item under contract shall include a three (3) year warranty in which the contractor
warrants that the unit is free from defects in material, workmanship, manufacturing, and design and will
perform to or exceed specifications, if operated properly, for the duration of the three (3) year warranty
coverage. Under this warranty, the contractor shall repair or replace any failed unit. Any failed unit
returned to a contractor repair center shall be repaired and returned to the government owner within three
weeks (21 calendar days) as documented on the bill of lading, Government or commercial, at no
additional cost to the Government. If the contractor is required to correct or re-perform any tasks, any
such tasks shall meet all specifications and requirements to the same extent as the work initially required
under this contract. If a replacement unit is provided, the replacement unit will assume the balance of the
warranty of the replaced unit. The unit shall be calibrated with standards traceable to the National
Institute of Standards and Technology (NIST) or AFMETCAL approved source.
2.0 Repair Centers: The contractor shall have a service center(s) for the purposes of receiving
products, repairing products, and returni
ng products to the Government. The Government will initiate the
request for repair service. The contractor shall have, for each center, at least one point of contact with a
telephone number and address to provide assistance in exercising warranties. One copy of this warranty,
a list of the centers, and the telephone numbers and addresses of the contractor’s warranty points of
contact shall be included with each item delivered.
3.0 Shipping Methods: The Government shall bear transportation costs for equipment returned to the
contractor for repair or replacement. The contractor is responsible for returning the item to the owner and
shall bear transportation costs from the repair center back to the user.
4.0 Warranty Marking: The system shall be furnished with a polycarbonate warranty sticker which is
permanently and conspicuously marked with the following information: the day, month, and year that the
warranty begins; the day, month, and year that the warranty ends; the instrument nomenclature; the
manufacturer, the FSCM/CAGE number, the contract number; and the commercial phone number of a
warranty repair point of contact. When applicable, the contractor shall provide the government with a
warranty sticker for first article/First production units after receipt of notification of first article/first
production acceptance.
The date the warranty begins for first article /first production units shall be the
date of acceptance. The date the warranty begins for production units is the date of acceptance and the
warranty expiration date shall be arrived at by using 45 days after the shipment date from the production
facility for production the units. In the event that a unit fails incoming acceptance testing of production
units, and is returned to the contractor for rework, the contractor shall revise the warranty marking to
reflect the latest dates as defined above. In the event that the contractor replaces a returned failed unit
under warranty, the replacement unit shall be marked to reflect the warranty expiration date of the
replaced unit.
5.0 Limitations: These warranties will not, in any way, be voided by any Government performed routine
maintenance accomplished in accordance with manufacturer’s service procedures. (Examples: replace
fuses, adjust instrument in accordance with calibration instructions, lubrication, cleaning, etc.).
6.0 Product Modifications: If the units delivered via this contract have a product/design or safety
defect which prevents the unit from meeting Purchase Description or other contract specification
requirements, the contractor shall be required to provide product modifications to all delivered units
to
eliminate the defect and ensure all specifications are met. All modifications including parts, and labor
shall be done at no cost to the Government. If the contractor is required to correct or re-perform any
tasks, any such tasks shall meet all specifications and requirements to the same extent as the work
initially required under this contract.
7.0 Government Remedies: In the event that the contractor fails to repair or replace, within three
weeks, any failed item returned under warranty as specified in paragraph 1.0 of this warranty description,
the Government may require the contractor to pay costs reasonably incurred by the United States in
taking necessary corrective action, or the Government may equitably reduce the contract price.
Produktspecifikationer
| Varumärke: | Fluke |
| Kategori: | temperaturkontroller |
| Modell: | 9143 |
Behöver du hjälp?
Om du behöver hjälp med Fluke 9143 ställ en fråga nedan och andra användare kommer att svara dig
temperaturkontroller Fluke Manualer
25 September 2025
25 September 2025
25 September 2025
25 September 2025
25 September 2025
25 September 2025
25 September 2025
25 September 2025
25 September 2025
25 September 2025
temperaturkontroller Manualer
Nyaste temperaturkontroller Manualer
7 September 2025
6 September 2025
6 September 2025
5 September 2025
30 Augusti 2025
25 Augusti 2025
24 Augusti 2025
21 Augusti 2025
13 Augusti 2025
13 Augusti 2025