Fluke i800 AC Bruksanvisning


Läs gratis den bruksanvisning för Fluke i800 AC (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 6 recensioner. Har du en fråga om Fluke i800 AC eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
PN 2842289
June 2007 Rev.1, 8/08
©2007-2008 Fluke Corporation. All rights reserved. Product
specifications are subject to change without notice. Printed in
France.
®
i800
AC Current Clamp
Instruction Sheet
Introduction
The i800 AC Current Clamp, the Clamp, has been designed for use
with multimeters, recorders, power analyzers, safety testers, etc., for
accurate non-intrusive ac current measurement.
Using the latest transformer technology, the Clamp measures
currents from 100 mA to 800 A.
The Clamp complies with the safety standards EN61010-2-032 for
input and output circuits.
Symbols
The table below lists the symbols used on the Clamp and/or in this
manual.
Symbol Description
~
Do not dispose of this product as unsorted municipal
waste. Go to Fluke’s website for recycling information.
W
Important Information. See manual.
X
Hazardous Voltage. Risk of electric shock.
T
Double insulation.
,
Application around and removal from HAZARDOUS LIVE
conductors is permissible.
)
Conforms to Canadian Standards Association.
P
Complies with the relevant European standards.
;
Conforms to Australian standards.
CAT III
Equipment designed to protect against transients in
equipment in fixed-equipment installations, such as
distribution panels, feeders and short branch circuits, and
lighting systems in large buildings.


Produktspecifikationer

Varumärke: Fluke
Kategori: Inte kategoriserad
Modell: i800 AC

Behöver du hjälp?

Om du behöver hjälp med Fluke i800 AC ställ en fråga nedan och andra användare kommer att svara dig