Gamber-Johnson 7160-1333 Bruksanvisning

Gamber-Johnson Inte kategoriserad 7160-1333

Läs gratis den bruksanvisning för Gamber-Johnson 7160-1333 (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 35 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 18 recensioner. Har du en fråga om Gamber-Johnson 7160-1333 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

Rev.A

INST-881

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

Attach the power supply to the overhead guard leg with the power supply clamp.

Place the power supply againts the overhead guard leg and clamp in place with

the the diamond plates shown below. Rotate the diamond plates so the bolts are

as tight as possible to the overhead guard leg. Once the power supply is

clamped in place the excess length of the bolts can be cut off if desired. Note:

the power supply can be clamped somewhere other than the overhead guard

leg if desired. For example it could be clamped to one of the upper bars on the

overhead guard.

PS-001

Printing Spec:

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Form Revision