Gamber-Johnson 7170-0595 Bruksanvisning

Gamber-Johnson Inte kategoriserad 7170-0595

Läs gratis den bruksanvisning för Gamber-Johnson 7170-0595 (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 15 recensioner. Har du en fråga om Gamber-Johnson 7170-0595 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

MAX

LIGHT-DUTY ROTATING WALL

(7170-0595 CONFIGURATION)

MAX

SMALL KNUCKLE

(APPLY LOCTITE TO BOTH ENDS)

MAX

TALL STATIONARY WALL MOUNT

(7170-0596 CONFIGURATION)

MAX

THREAD

ADAPTER

(APPLY LOCKTITE

TO BOTH ENDS)

MAX

100mm

EXTENSION TUBE

This instruction sheet covers the installation of the Gamber-Johnson(7170-0595 & 7170-0596). This kit

is intended to mount a dock/cradle to a wall and not intended for use in a vehicle.

Figures below show the correct assembly procedure.

The installer is responsible for suppling hardware (type, size, quantity ) for the surface.

(example: Lag Screws, Machine Bolts, Concrete Anchors).

MAX

75mm ADAPTER PLATE

7170-0595 & 7170-0596

LIGHT-DUTY ROTATING WALL MOUNT

TALL STATIONARY WALL MOUNT

PS-001

Printing Spec:

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Form

Revision

Product

INSTALLATION INSTRUCTIONS

REV A

INST-796

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.