Geemarc VISO 60 Bruksanvisning
Läs gratis den bruksanvisning för Geemarc VISO 60 (2 sidor) i kategorin klocka. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 11.5 recensioner. Har du en fråga om Geemarc VISO 60 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
1 2 3
User Manual
Viso60 DCF –
(Mainland Europe Not UK) –
!!! PLEASE REFER TO OUR WEBSITE: WWW.GEEMARC.COM FOR AN
UP TO DATE USER GUIDE, AS THERE MAY BE IMPORTANT UPDATES
AND CHANGES YOU NEED TO BE AWARE OF!!!
1. Features
- Easy to Read and Understand Time display
- Perpetual Calendar Up to Year 20 99
- languages user selectable at the starting 14
- Hour, Day of the week, month and stage of the day modes
2. Unit Appearance
Part A - LCD
Part B - Rear part
A1: Day of Week or Month
A2: Stage of the day
A3: Analog Time
A4: Radio Control Icon
B1: “SET” Button
B2: utton“▲” B
B3: utton “▼” B
B4: “RESET”
Part - Structure C
Part Analog Setting D –
C 1: Hanging Hole
C 2: Battery Door
D 1: REC button
D2: Transportation pin
D3: M Set button
D4: Reset button
D5: Battery compartment
3. ANALOGUE CLOCK(A3)
3.1 GETTING STARTED/POWER SUPPLY
(1) Remove the transportation pin ( ) from the clock movement. The D2
clock can be operated only after the pin has been removed.
(2) Insert one battery (1.5V, AA/LR6) into battery compartment
( ). Make sure to place the battery strictly according to the D5
right polarities (+/-) as shown in the battery compartment.
3.2 TIME SETTING
After the clock has received the DCF time signal the time will be set
according to the Central European time(CET). Summer and winter
time change (and reverse) is also set automatically. Other deviating
times can be set manually only.
3.3 Automatic time setting via DCF time signal
After inserting the battery, the time will be set automatically via DCF
signal. This process may take a few minutes (about 5-7 minutes).
During this process, the clock hands will turn several times and may
pause until they display the right time.
3.4 Initiate to receive the DCF time signal manually
Use this function when automatic summer/winter time change does
not work or the wall clock temporarily receives no time signal.
(1) Press and hold the REC button ( ) for 3 seconds to start manual D1
search for the DCF signal.
(2) The clock hands will move to their start position (12:00 a.m.)
and the wall clock then tries to receive the signal.
Wait approx. 2-5 minutes until the current time will be displayed.
3.5 Manual time setting
It is necessary to set the time manually in places where no radio signal
is received.
(1) Press and hold the ( ) button for approx. 3 seconds. M.SET D3
(2) When the minute’s hand starts moving you can set the time manually:
- Press the ( ) button to set the time in minutes. M.SET D3
- Press and hold the M.SET(D3) button to set the time continuously.
(3) Release M.SET( ) button to stop manual setting and save the time D3
automatically. Exit the manual time setting mode.
3.6 Reset
If there is no response from the 2
nd
hand on the wall clock or if any
other malfunction occurs perform the following steps.
With this procedure all received data will be deleted.
(1) Press ( ) button with a pointed instrument (e.g. pen). RESET D4
(2) The clock hand will move to the start position (12:00 a.m.) and the
wall clock will try to receive the signal.
Wait approx. 2-5 minutes until the current time will be displayed.
4 DIGITAL CLOCK .
4.1 Getting started:
⚫ Open battery Cover ( ). C2
⚫ Insert 2 x AA size batteries observing polarity (+ and ). You will hear –
a “click” sound which will confirm the batteries have been inserted
correctly.
⚫ Replace battery compartment cover ( ). C2
4.2 To begin
You have 1 minute to arrange the first setting. The clock displays
English, press “ ” ( or” ” (
▲
▲
▲
▲▲ B2) ▼B3) to select your language and
press “ ” (SET B1) to validate, P ) to choose ress” ) or ” ▲
▲
▲
▲▲”(B2 ▼”(B3
the type of display set and press ) to validate (see below the “SET”(B1
different display methods).
If you don’t press any keys, after 1 minute the Viso60 will launch the
automatic clock setting.
Note: Place the Viso60 ar a window for ne
the clock to automatically set.
-DP-1 displays the day of the week and the
2
nd
line the part of the day.
-DP-2 displays the Month and the 2
nd
line
the da and the year. -DP3 will display te
the first 2 display types one after the other
for XX seconds (see section 4.4.C to set the
time).
4.3 Radio Controlled Time:
⚫ The clock automatically starts to scan the DCF time signal in the first
10 minutes. (Radio Control Icon “ ” (A4) flashes on LCD).
(A4) flashing
Indicates the DCF signal is being
received
(A4) Continuous
Indicates signal received successfully
(A4) Icon disappears
Indicates signal reception failed
C1
B3
B1
B2
B4
C2
A1
A2
A4
A3
Produktspecifikationer
| Varumärke: | Geemarc |
| Kategori: | klocka |
| Modell: | VISO 60 |
Behöver du hjälp?
Om du behöver hjälp med Geemarc VISO 60 ställ en fråga nedan och andra användare kommer att svara dig
klocka Geemarc Manualer
11 Oktober 2025
9 Augusti 2025
20 September 2024
20 September 2024
6 September 2024
klocka Manualer
- Citizen
- Hama
- Mondaine
- Kogan
- Techno Line
- Taylor
- Elco
- Lorus
- Braun
- Irox
- AV:link
- Antelope Audio
- Karlsson
- GlobalTronics
- Marquant
Nyaste klocka Manualer
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025