Gigabyte GA-7VM400M-P Bruksanvisning

Gigabyte moderkort GA-7VM400M-P

Läs gratis den bruksanvisning för Gigabyte GA-7VM400M-P (96 sidor) i kategorin moderkort. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 5.5 recensioner. Har du en fråga om Gigabyte GA-7VM400M-P eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/96
When you installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has
"AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP
card is AGP 4X/8X(1.5V).
Caution: AGP 2X(3.3V) card is not supported by VIA
®
KM400. You
might experience system unable to boot up normally. Please insert
an AGP 4X/8X(1.5V) card
Example 1: Diamond Vipper V770 golden finger is compatible with
2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X
(1.5V) mode by adjusting the jumper. The factory default for this card is
2X(3.3V).
The GA-7VM400M(F)-P motherboards might not function properly, if you
install this card without switching the jumper to 4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power
Color", the graphics card manufacturer & some SiS 305 cards, their
golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but
they support 2X(3.3V) only.
The GA-7VM400M(F)-P motherboards might not function properly, If you
install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on
ATi Rage 128 Pro chip, the design of AG32S(G) is compliance with
AGP 4X(1.5V) specification. Therefore, AG32S (G)will work fine with
VIA
®
KM400 based motherboards.
AGP 4X/8X notch


Produktspecifikationer

Varumärke: Gigabyte
Kategori: moderkort
Modell: GA-7VM400M-P

Behöver du hjälp?

Om du behöver hjälp med Gigabyte GA-7VM400M-P ställ en fråga nedan och andra användare kommer att svara dig