Gigabyte GA-8IP900-L Bruksanvisning

Gigabyte moderkort GA-8IP900-L

Läs gratis den bruksanvisning för Gigabyte GA-8IP900-L (104 sidor) i kategorin moderkort. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 3 recensioner. Har du en fråga om Gigabyte GA-8IP900-L eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/104
When you installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has
"AGP 4X/8X (1.5V) notch"(show below), please make sure your
AGP card is AGP 4X/8X (1.5V).
Caution: AGP 2X card is not supported by Intel
®
845(GE/PE) / 845
(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P. You might experience
system unable to boot up normally. Please insert an AGP 4X/8X
card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V)
mode by adjusting the jumper. The factory default for this card is
2X(3.3V). The GA-8IP900(-L) (or any AGP 4X/8X only)
motherboards might not function properly, if you install this card without switching
the jumper to 4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power
Color", the graphics card manufacturer & some SiS 305 cards, their
golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but
they support 2X(3.3V) only. The GA-8IP900(-L) (or any AGP 4X/8X only)
motherboards might not function properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)
specification. Therefore, AG32S(G) will work fine with Intel
®
845(GE/PE) /
845(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P based motherboards.


Produktspecifikationer

Varumärke: Gigabyte
Kategori: moderkort
Modell: GA-8IP900-L

Behöver du hjälp?

Om du behöver hjälp med Gigabyte GA-8IP900-L ställ en fråga nedan och andra användare kommer att svara dig