Gira 117100 Bruksanvisning

Gira Inte kategoriserad 117100

Läs gratis den bruksanvisning för Gira 117100 (7 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 1.5 recensioner. Har du en fråga om Gira 117100 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/7

LED signal light

Order-No. : 1171 00

LED orientation light

Order-No. : 1169 00

Operating instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Failure to observe the instructions may cause damage to the device and result in fire and

other hazards.

Danger of electric shock. Always disconnect device before working on it. At the same

time, take into account all circuit breakers that supply dangerous voltage to the device.

The device is not suitable for use in safety systems or as an emergency light.

Fire hazard. Do not operate the LED luminaires on a dimmer. The LED luminaires cannot

be dimmed.

The LED luminaires may not be operated on an electronic switching insert (e.g. Tronic or

Triac insert). The switching inserts could be damaged.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Device components

LED signal lamp (Figure 1)

Figure 1

(1) Flush-mounted insert

(2) Frame

(3) Separating strip

(4) Labelling film, optional

(5) Light-scattering film

(6) Lamp cover

1/7

32562632 30.06.2011

LED signal light, LED orientation light

10393481 I00

LED orientation light (Figure 2)

Figure 2

(1) Flush-mounted insert

(2) Frame

(4) Labelling film, optional

(5) Light-scattering film

(6) Lamp cover

(7) Slat, optional

3 Function

Intended use

- LED luminaire for orientation or indication

- Can be operated by means of external push-button or switch

- Installation in appliance box to DIN 49073

Product characteristics of LED signal lamp

- Two-colour signal lamp; can be used, for example, as an access control

- Can be used in switch combinations or individually

- Can be switched between red and green via an external switch

- Individually labelled film can be inserted

i Visible differences in the brightness and colour rendering are possible due to

manufacturing tolerances in production of the LEDs.

Product characteristics of LED orientation light

- Can be used in switch combinations or individually

- Makes it easier to find switches or to orient oneself in dark rooms.

- Individually labelled film can be inserted

- The colour can be switched via an external push-button

- Light colours white, blue, orange, red, green and colour sequence can be called up via

installation button

- The colour sequence can be stopped at any point

- Brightness can be changed using internal potentiometer

i Visible differences in the brightness and colour rendering are possible due to

manufacturing tolerances in production of the LEDs.

32562632 10393481 I00 30.06.2011

2/7

LED signal light, LED orientation light

4 Operation

Switching the LED signal lamp

The colours red and green can be switched or changed over individually with a series switch or

changeover switch.

o Operate switch.

The signal lamp switches to red, green, or off.

Switching the LED orientation light

The luminaire is switched on or off with a switch or switching contact.

The luminaire is switched off.

o Operate on/off switch.

The orientation light lights up white briefly and then switches to the colour before the mains

interruption, or starts the colour sequence. The colour sequence always begins with violet,

magenta.

Setting the colour or colour sequence of the LED orientation light

The colour setting for the orientation light is performed using an additional push-button.

Each press on the button switches it onwards by one colour. There are seven possible colours:

white

blue

orange

red

green

colour sequence

stopped colour sequence

Orientation light is switched on.

o Press colour selection push-button briefly.

The orientation light switches to the next colour.

Press the colour selection push-button until the desire colour or the colour sequence are active.

Stopping the colour sequence at the desired point

In order to set an individual colour, the colour sequence can be stopped at any desired point.

The complete colour sequence take about 5 minutes.

The colour sequence is active.

o Press colour selection push-button briefly.

The colour sequence stops and the current colour is retained.

i The colour remains even after a mains interruption.

i To start the colour sequence again, select the colour sequence again using the colour

selection push-button.

Synchronising LED orientation lights

If multiple orientation lights are operated in parallel, it may occur that after the orientation lights

switch onwards they may not light up in the same colour, or that the colour sequence may

diverge. In this case all of the luminaires can be reset.

o Press colour selection push-button longer than 2.5 seconds.

The orientation lights run through a reset and go out briefly.

o Release colour selection push-button.

The orientation lights light up white; state as supplied.

32562632 10393481 I00 30.06.2011

3/7

LED signal light, LED orientation light

Produktspecifikationer

Varumärke:	Gira
Kategori:	Inte kategoriserad
Modell:	117100
Bredd:	55 mm
Djup:	55 mm
Korrekt användning:	inomhus
Form:	Rektangel
Produktens färg:	Green, Red
Temperatur vid drift:	-15 - 40 ° C
AC-inspänning:	230 V
Internationellt skydd (IP) kod:	IP20
Lamptyp:	LED
Monteringssätt:	Vägg
Strömkälla av typen:	AC
Lampor:	1 W