Grasslin FM 1 digi 42 Bruksanvisning
Läs gratis den bruksanvisning för Grasslin FM 1 digi 42 (2 sidor) i kategorin Termostat. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 9 recensioner. Har du en fråga om Grasslin FM 1 digi 42 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Operating Instructions
FM/1/2 digi 42
WA-EKF 2738/07.95/S:MMS/D:Bau/80.10.0679.7
1. Putting into operation
The steps marked with the symbol are necessary to
carry out a switching program.
1.1 Reset
Press the "Reset" key with a pencil or similar
object. This sets the time switch to its basic setting.
– before every restart
– to delete all switching times and the time
(with the exception of the standard program)
The following appears after approximately
2 seconds:
Hand switch
Reset
Holiday
program
Enter
switching
time
1.2 Standard program (available on request)
Modules supplied with an integrated standard program
can be activated without programming on Mondays –
on time – at 20:00. The standard program contains
the following preset switching times which, however,
can also be changed.
Monday – Friday Saturday + Sunday
6:00 = ON 7:00 = ON
22:00 = OFF 23:00 = OFF
Activation of the standard program:
After pressing the "Reset" key (see 1.1):
Press the " " key on Mondays at 20:00:
The standard program is activated and
runs on time.
1.4 Entering switching times
42 memory locations are available
Each switching time occupies 1 memory location.
Keep pressing the "Prog." key until a free
memory location "– – : – –" is shown in the
display.
Select the switching functions " " (ON) or
" " " " (OFF) with the key for channel
1 or 2 (depending on the version).
With the
"h"
key: enter the hours
With the
"m"
key: enter the minutes
If a switching command is to be executed every
day, proceed with step . If 1 switching command
is to be executed only on one day or on cer tain
days skip step and continue with step .
Save with the "Prog." key or
With the "Day" key, select 1 day on which the
switching command is not to be carried out
(cursor flashes).
Confirm this day with the "Sel." key
(day of the week and cursor flash)
Press the "Day" key (day is deselected).
Repeat steps , and for every day to be
deselected.
Save with the key (the next free "Prog."
memory location is displayed)
or
Save with the " " key.
The time switch goes over to automatic mode
and displays the current time.
Begin every additional switching time and the
associated switching state = ON or = OFF
again with 1.4.
Note:
If an input is incomplete, the segments still not
selected are displayed flashing.
If you have deselected a day on which the
switching command should be carried out,
Reselect the deselected day with the "Day"
key (day of the week and cursor flash).
Confirm this day with "Sel." (cursor flashes).
Press the "Day" key (day is reselected).
Save with the "Prog." key
(the next free memory location is displayed)
or
Save with the " " key.
1.5 Free channel block formation
On the two channel version, one timed instruction
space can be used to enter a switching command
(ON or OFF) for either channel 1 or channel 2,
or both channels if required.
Keep the " " key pressed during steps
, and .
With the "h" key: enter the hours
With the key: enter the minutes"m"
With the "Day" key: enter the current day
1= Mo ... 7 = Su
Release the " " key
The colon now flashes at one second intervals.
Note:
If the keys are pressed for longer than"h/m"
2 seconds, the display will enter fast-forward
scroll mode.
Deselect days
of the week
Select days
of the week
Enter
hours
Enter
minutes
Enter
time
Summer time
and winter
time
changeover
Days of
the week
flash
1.3 Entering the time and current day
of the week
After pressing the "Res" key (see 1.1):
During the summer time period:
press the "±1h" key once.
GB
Connection
see appliance stamp/sticker/rating plate
Grässlin time switch modules are largely protected against
„spike“ or interference voltages. If faults still occur, counter-
measures against foltage peaks can be taken with familiar
elements (varistors, suppressor diodes etc.). Particular
attention must be paid to this when inductive loads are
connected.
Produktspecifikationer
| Varumärke: | Grasslin |
| Kategori: | Termostat |
| Modell: | FM 1 digi 42 |
Behöver du hjälp?
Om du behöver hjälp med Grasslin FM 1 digi 42 ställ en fråga nedan och andra användare kommer att svara dig
Termostat Grasslin Manualer
8 Januari 2025
10 September 2024
6 September 2024
4 September 2024
3 September 2024
1 September 2024
31 Augusti 2024
31 Augusti 2024
30 Augusti 2024
29 Augusti 2024
Termostat Manualer
- Techno Line
- Hager
- Enda
- Remeha
- Chacon
- Grohe
- Agpo Ferroli
- Optima
- Devolo
- Rademacher
- HQ
- Plugwise
- Xavax
- Warmup
- TFA
Nyaste Termostat Manualer
13 Oktober 2025
12 Oktober 2025
12 Oktober 2025
5 Oktober 2025
2 Oktober 2025
2 Oktober 2025
29 September 2025
28 September 2025
28 September 2025
28 September 2025