GVI Security autoIP NID-213M Bruksanvisning
GVI Security
övervakningskamera
autoIP NID-213M
Läs gratis den bruksanvisning för GVI Security autoIP NID-213M (4 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 8.5 recensioner. Har du en fråga om GVI Security autoIP NID-213M eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
NID-213M/NRD-213M
2 Megapixel, H.264 IP Mini-dome Camera
QuIck StaRt GuIDe
1. Review Package Contents
2. Make Connection To Camera
Connect the camera to the network using a shielded network cable (CAT5e / CAT6)
3. Adjust Camera Position
Designation Description
1 Reset Button Restore to default setting; press the button with a proper tool
2 Lens Rotate the lens right/left to adjust focus
3 Focus Fixed Screw Loosen the screw to adjust the lens
4 Tilt Fixed Screw Loosen the screw to adjust tilt angle
GVI Security • Toll Free: 888-595-2288 • Fax: 972-245-7333
This product specifications and manual are also available in pdf format at www.gviss.com
The information is subject to change without notice • v1.20.11
Indoor Camera/
Rugged Camera (with Cable)
Self-tapping
screws (x3)
Plastic Anchors
(x3)
Security Screw
(x1)
Security Torx Quick Guide CD
4. Assign an IP Address
Most networks today have a DHCP server that automatically assigns IP addresses to connected devices.
If your network does not have a DHCP server the autoIP camera will use 192.168.0.250 as the default IP
address.
The autoIP Discovery Tool can be used to assign a new IP address. The tool is available on the CD
supplied with this product or it can be downloaded from http://www.gviss.com/support/ip_support.php.
NOTE: The computer running the autoIP Discovery Tool must be on the
same network segment (physical subnet) as the autoIP cameras.
• Verify that the autoIP cameras are connected to the network, and
that the power has been applied.
• Open the autoIP Discovery Tool
• Click “Device Search” to list all of the autoIP cameras on the
network.
• Right click on the desired autoIP camera and select “Network
Setup” to adjust the network settings.
GVI Security • Toll Free: 888-595-2288 • Fax: 972-245-7333
This product specifications and manual are also available in pdf format at www.gviss.com
The information is subject to change without notice • v1.20.11
Produktspecifikationer
| Varumärke: | GVI Security |
| Kategori: | övervakningskamera |
| Modell: | autoIP NID-213M |
Behöver du hjälp?
Om du behöver hjälp med GVI Security autoIP NID-213M ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera GVI Security Manualer
22 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
22 September 2024
övervakningskamera Manualer
- JVC
- Petcube
- Aritech
- 3xLOGIC
- Leviton
- Caliber
- Synology
- Wisenet
- Acti
- Burg-Wachter
- ClearOne
- Defender
- Pelco
- ORNO
- Hombli
Nyaste övervakningskamera Manualer
15 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025