GVM MX150D Bruksanvisning
GVM
Inte kategoriserad
MX150D
Läs gratis den bruksanvisning för GVM MX150D (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 4 recensioner. Har du en fråga om GVM MX150D eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
1 2 3 4
Connect the lamp and adapter, plug in the power line or insert the
battery, and switch on the power supply.
5
5
1
2
3
5
6
4
7
8
Power Switch
6 7 8 9
GVM-MX150D
160.00 mm
120.00 mm
封底 封面
封底与封面的背面留白，书本形式
Button of mode select
Mode/ WIFI button
Power port
V-buckled battery / buckle plate
connector of battery
Knob of brightness
control
Power switch
DMX port
Knob of fixing lamp holder
Knob of color
temperature control
Aluminum-alloy shell
Mounting point of lamp holder
Softboard
Folding
Anger fixing
knob
U-type holder
Connecting light
and power supply
Insert V buckle battery
1
2
3
5
6
4
7 8
Mode key/ WIFI reset key: mode is divided into Master mode and Slaver
mode; the key is for resetting the username and password of WIFI.
CH +/- key: to change channels (0~11)
LCD display: able to display the data, such as brightness, color
temperature and channel value, etc.
Brightness indicator: It will be lightened when adjusting the brightness
knob.
Color temp. indicator: it will be lightened when adjusting the color
temperature knob.
DMX console port
DMX console port
C O N T E N T S
Product introduction Page 1- ---------------------------------------- --
Product parameter Page 2------ ------------ -- -------------- ---- --- ----
Product structure analysis Page 3--------------------- ------------- --
Installation method Page 4 7~------------------------ --- --------- -----
Description of product control keys Page 8------------ --------- --
Function introduction and instruction for use Page 9-----------
APP control and APP on-line control Page 10 11~------------- ---
Precautions Page 11------------------------------------------------------
Simple faults and troubleshooting Page 12-----------------------
Disclaimers Page 13------------------------------------------------------
Use and preservation Page 13----------------------------------------
Packing list Page 14------------------------------------------------------
14
Welcome to use GVM-MX150D. This product is designed specially for
senior photographers and can be applied to many occasions, such as live
video, outdoor photography, studio photography and video shooting on
YouTube as well. The characteristics of this product are:
PRODUCT
INTRODUCTION
PRODUCT
PARAMETER
①
②
It features stepless double color temperature and the range of color is
3200k~5600k with 2448 LED bulbs, which contributes to the recovery and
abundance of colors, so as to provide natural and vivid shooting effect.
It is equipped with intelligent control system via APP, able to control via
intelligent mobile device.
③It is equipped with LCD and stable system, able to rotate through 360 。
and with four-vane baffle, which can effectively control the light to avoid
unexpected light, allowing the user to shoot with expected effect.
We believe that using the product properly is of great help to your shooting
practice. Therefore, we strongly suggest reading the following User Guide
before using the product.
Brand: GVM
Product Name: Photoflood lamp
Product Model: GVM-MX150D
Product Type: Photographic flash LED
CRI: ≥97
LED QTY: 2448
Net weight: 6.1KG
Size (mm): 575*385*120mm
Heat dissipation: Natural
Material: Aluminum alloy
Production Place: Huizhou. China
Function/ Characteristic: APP, joint control, DMX console port, LED with
high color rendering index (CRI)
Color Temp: 3200k----5600k
Brightness degree: 56000lux/0.5m, 21000lux/1m
Light Adjusting mod : Steplesse
Power: 150W
Volt: AC: 100-240V
Power Supply Mode: AC input &battery
Capacity of Battery: battery is not provided
Power supply: Built-in power supply
PRODUCT
STRUCTURE ANALYSIS
LCD display screen
1
Turn the button in clockwise direction to install and fix the lamp on the
holder and turn the button in counter-clockwise direction to disconnect
the lamp and holder.
INSTALLATION
METHOD
2
Insert the softboard into the light panel from top to bottom.
Loosen the adjusting knobs at sides of U-type holder and adjust the
angle of panel as expected, then tighten the adjusting knobs at sides
of U-type holder.
3
Align the screws on the folding with the screw holes on the lamp first,
then insert and tighten the screws.
4
Set host mode for the photography light ( automatically as host mode when
switch on the machine ) , open “GVM Easily” APP on the mobile phone
( meanwhile turn on WIFI on the phone ), in the main menu in the APP----switch
the devices---select “single and double photography light”,then in the
main menu in APP-----set----select “switch WIFI”, and connect photography
light once it shows ( WIFI initial username GVM_LED, password gvm_admin ),: :
“ successfully connected GVM_LED”, return back to the main interface,
after it shows “double color temperature LED light ” ( successfully connected )
in the main interface it is allowed to control the lightness, color temperature,,
channel value or switch on and off through the control key in APP, and also
the slave machines.
WIFI username and password resetting
It is able to reset the WIFI username and password if long press the WIFI reset
button for over 5 seconds. After resetting, the username and the password will
return to the initial ( WIFI username GVM_LED, WIFI password gvm_admin ): : .
Phenomenon
①
②
check if the mode were set as slave
mode, lightness and color temperature
of the products cannot be controlled
in slave mode
check if the product is “switch off”
because of the APP of mobile phone.
make sure the adapter
is w ell conta cted with
the power plug
charge the battery
before using it
p r e s s t h e “ m o d e ”
button for once, swit ch
the mode from slave
mode to host mode
press the “ON/OFF”
button once again
10
1.
11
APP CONTROL AND
APP ON-LINE CONTROL
PRECAUTIONS
①Please use the matching power adapter or lithium battery with the same
specification to power the product. Do not use power adapter with
different output voltage parameters.
The product is not waterproof, please use it in rainproof environment.②
The product is not anti-corrosion, therefore do not let the product touch
any corrosive liquid.
③
When using the product, make sure the product is put firmly and prevent
from falling and damage.
④
If the product will not be used for a long time, please switch off the power
to reduce energy loss.
⑤
SIMPIE FAULTS
AND TROUBLESHOOTING
Check the product
Troubleshooting
the switch
indicator does
not light up
the knob of
lightness and
color temperature
are out of control
the screen and
the light are off
when the
product is in
the state of
power-on
check the matching po wer ada pter
indicator light up or not.
when using lithium battery, make
s u re t h er e ’s n o “ l ow p o we r ”
protection.
DISCLAIMERS
Bef ore us ing th is pro duct, p lease read the instructions carefully and make sure
use the pr oduct corr ectly. I f you don’t obey the instructions and warnings, you
may be cau se har m t o y ourse lf and the peo ple ar ound , or eve n d amag e t he
pro duct a nd oth er thi ngs aro und.
2. Once you use this product, you are deemed to have read the disclaimer and warning
carefully, understand and acknowledge all the terms and contents of this statement,
and promise to take full responsibility for the use of this product and possible
consequences.
USE AND
PRESERVATION
12 13
main menu
DESCRIPTION OF
PRODUCT CONTROL KEYS
Nam e
Host machine
Qu ant it y No tes
1
Power line
1
1
Instructions
1
1
PACKING
LIST
Folding
Softboard
① ：Mode selection
There are two kinds of more which are host mode and slave mode, switching
through mode button (automatically as host mode when switch on the
machine). In host mode, it is able adjust lightness, color temperature and
channel value, and it is also able to connect APP, and control the parameters
through APP. While in the slave mode, it is only able to set channel value,
rather than lightness and color temperature.
FUNCTION INSTRUCTION &
INSTRUCTION FOR USE
② ：Channel adjustment
Set channel value using channel addition and subtraction key, ranging
from 0 to 11.
③ ：Brightness adjustment
In the host mode, adjust lightness through the knob or APP, ranging from
10% to 99%.
④ ：Color temperature adjustment
In the host mode, adjust color temperature through the knob or APP, ranging
from 3200K to 5600K.
④ ：On-line control (between photography lights)
Prepare two or more photography lights, set on as host mode and the other
slave mode, and set a same channel value, in this way, it is able to control
the lightness and color temperature of slave machine through adjusting the
knob of the host machine. Moreover, it is also able to connect the host
machine and APP, and then use the APP the control the slave machines.
Web: www.gvmled.com
Faceb ookGVM Offi cial
websi te
Downl oad APP
IOS
Downl oad APP
Andro id
Do no t put the p roduct in highly humid, strong electromagnetic field, direct sunlight,
high temper ature environment. If not use the product for a long time, disconnect the
powe r and tak e out the battery.
Clean：Bef ore cl ean, disconnect the power plug. And use wet cloth rather than any
det ergen t or sol uble l iquid, avoiding of damaging the surface layer.
USE AND
PRESERVATION
Power：Make sure the power is in the demanded range, not too high or too low. Correctly
load the battery, in order not the damage to machine.
Repairing：If there is fault or performance degradation, do not unpack the shell by
yourself, avoiding damage the machine and lose the right of maintenance. When there
is fault, do not hesitate to contact us, and we will do our best to deal the problem.
Accessories：Ple as e use the a ccessor ies provided by manufacturer and approved
ones , in order t o maximi ze the performance.
Guarantee：Do not modify the product, or you will lose the right of maintenance.
C
C
C
CCl
l
l
lle
e
e
eea
a
a
aan
n
n
nn：
：
：
：：
Powe
Powe
Powe
PowePower
r
r
rr：
：
：
：：
Re
Re
Re
ReRep
p
p
ppa
a
a
aai
i
i
iir
r
r
rrin
in
in
ining
g
g
gg：
：
：
：：
A
A
A
AAc
c
c
ccc
c
c
cce
e
e
ees
s
s
sss
s
s
sso
o
o
oor
r
r
rri
i
i
iie
e
e
ees
s
s
ss：
：
：
：：
G
G
G
GGu
u
u
uua
a
a
aar
r
r
rra
a
a
aan
n
n
nn te
te
te
tetee
e
e
ee：
：
：
：：
Produktspecifikationer
| Varumärke: | GVM |
| Kategori: | Inte kategoriserad |
| Modell: | MX150D |
Behöver du hjälp?
Om du behöver hjälp med GVM MX150D ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad GVM Manualer
31 December 2025
7 Oktober 2024
4 Oktober 2024
23 September 2024
13 September 2024
9 September 2024
3 September 2024
1 September 2024
25 Augusti 2024
24 Augusti 2024
Inte kategoriserad Manualer
- EVOline
- NeoMounts
- Wonky Monkey
- Hoymiles
- Dupla
- Decimator
- Advance
- Vertex
- Camry
- Anova
- Asus
- Digitalinx
- SiriusXM
- Sonicware
- Itechworld
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025