Hager 85221101 Bruksanvisning
Hager
Inte kategoriserad
85221101
Läs gratis den bruksanvisning för Hager 85221101 (6 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 4 recensioner. Har du en fråga om Hager 85221101 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
1/6
07/2012
Blind insert comfort
Order no.: 8522 11 00
Operating instructions
1. Safety instructions
Electrical equipment must only be installed and assembled by a qualied electrician in
accordance with the relevant installation standards, directives, determinations and safety
and accident prevention directives of the country.
Failure to comply with these instructions may result in damage to the device, re or other
hazards.
Hazard due to electric shock. Disconnect before working on the device. Take into
account all circuit breakers that feed dangerous voltages to the device.
Hazard due to electric shock. The device is not suited for safe disconnection of the
mains supply.
Hazard due to electric shock. Do not operate device without the application module.
If several drives should be connected in parallel to one output, it is mandatory to observe
the manufacturer's data; use a cut-off relay where required. Drives can be destroyed.
Use blind drives with mechanical or electrical nal position switches only. Check nal
position switches for correct adjustment. Observe manufacturer's data. The device can
be damaged.
Hazard of injury. Use the device to control blind, shutter or awning drives only. Do not
switch any other loads.
Observe the motor manufacturer's data regarding change-over time and max.
switch-on time (ED).
Do not lay control lines in parallel to the motor lines (danger of coupling).
These instructions are an integral component of the product, and must be retained by the
end user.
2. Design of the device
(2)
(1)
(3)
(5)
(4)
(6)
Figure 1: Shutter insert
(1) Shutter insert
(2) Frame
(3) Application module e.g. from a push-button for blinds
web_85221100_gb_2012-07.indd 1 27.07.2012 08:09:55
2/6
07/2012
(4) Screw for dismantling protection (not R.1/R.3)
(5) Blind button design cover
(6) Connecting terminals
3. Function
Correct use
–Switching electrically operated blinds, shutters, awnings and similar hangings.
–Circuiting of extension units push-buttons for blinds, blind inserts, key push-buttons for
blind possible
–Only suitable for use in indoor areas, no drip or spray water.
–Installation in wall box according to DIN 49073.
–Operate with suitable application module (see Chapter 6.2, "Accessories")
Product characteristics
–2 mechanically and electrically mutually locked relay contacts.
4. Operation
These instructions describe the installation of the shutter insert. The operation and function of
the application modules are described in the instructions of the respective cover.
�
The function of the extension unit is only possible when there is an application module
attached to the master unit.
5. Information for electricians
5.1 Assembly and electrical circuiting
DANGER!
Touching live parts can result in an electric shock.
An electric shock can be lethal.
Disconnect the connecting cables before working on the device and cover all live
parts in the area!
Circuiting and mounting of shutter insert
L
N
Figure 2: Shutter insert circuiting diagram
A MCB max. 10 A is installed as device protection.
Circuit shutter insert according to circuiting diagram (Figure 2)
Install shutter insert in wall box (recommended: deep box). The connection terminals must
be at the bottom.
Attach the frame and application module (see instructions for application module).
web_85221100_gb_2012-07.indd 2 27.07.2012 08:09:56
3/6
07/2012
Individual control with push-button for shutter extension unit
Individual control with push-button for blind extension unit according to circuiting diagram
503520
L
N
Individual control with key push-button for shutter extension unit
Connect individual control with key push-button for shutter extension unit according to cir-
cuiting diagram
L
N
web_85221100_gb_2012-07.indd 3 27.07.2012 08:09:57
Produktspecifikationer
| Varumärke: | Hager |
| Kategori: | Inte kategoriserad |
| Modell: | 85221101 |
Behöver du hjälp?
Om du behöver hjälp med Hager 85221101 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Hager Manualer
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
1 April 2025
Inte kategoriserad Manualer
- Victron Energy
- Hammond
- Brondi
- IK Multimedia
- Roco
- Innovative
- Bestgreen
- EtherWAN
- URC
- Dayclocks
- Blow
- Trotec
- Profoon
- Primewire
- Sonorous
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025