Hager K7F5M1W Bruksanvisning
Läs nedan 📖 manual på svenska för Hager K7F5M1W (44 sidor) i kategorin Växla. Denna guide var användbar för 18 personer och betygsatt med 4.3 stjärnor i genomsnitt av 9.5 användare
Sida 1/44
Klik Lighting
Connection
Catalogue
Klik is the lighting connection system for
all your lighting designs, beneting from its
modular and adaptable design. From concept
to commissioning, Klik adapts to meet your
requirements.
3
Klik is the lighting
connection system
for all your lighting
designs.
Established in the UK in the 1980s with its innovative
4 Pin plug & socket, installers have come to know and
love Klik for its speed & ease of installation.
Klik has continued to develop to meet the changing
needs of modern lighting connection & control systems
through the Klik 4 & Klik 7 Ranges.
But the ethos has stayed the same...
Just Klik and forget.
From Start to
Finish.
With its pre-wired plugs, Klik saves time on site,
eliminates the chance of poor connections and
allows for the system to adapt as needs change.
Luminaires can be plugged-in in seconds, with
absolute safety and without circuit isolation. The
secure, simultaneous mechanical & electrical
connection gives complete condence.
Klik is able to exploit the benets of
pre-fabricated wiring systems through
its modular and adaptable design. From
concept to commissioning, Klik adapts
to meet your requirements.
By being a pluggable system, the
prospect of future refurbishments is
also nothing to worry about, lights
or groups of lights can be relocated
quickly and easily.
01
Design
4
5
Part of the problem with traditional
lighting systems comes when a building
or ofce space needs to change. The
inherent benet of Klik is that adapting
to a new layout is as easy as plugging
in a plug.
The Klik connector system brings
plug-in convenience and versatility to
lighting. Lights can be plugged-in, in
seconds, with absolute safety, without
circuit isolation.
The unique design prevents any
unwanted disconnections due to load
on cables or vibrations.
Klik is a truly t and forget lighting
connection system. With a range of
settings for daylight linked dimming,
occupancy sensing photocell control
for standard luminaires and DALI
control, after Klik is installed, you’ll
forget it’s even there.
04
Adapt
02
Install
03
Use
6
What Klik can
do for you
02
03
01
05
04
Over 75% of existing lighting installations are thought to be out of date and
unable to meet current design standards.
With Klik 7, we provide a system which is energy efcient, meets current
design standards and takes into account the usage and function of a space,
responding to daylight levels as well as occupancy and footfall.
White
Luminaire Lead
Mains & DALI
Connection
Black
Link Lead
Red
Emergency
Luminaire Lead
Blue
Switching (Occupancy
Sensor / Wall Switching)
Hager Occupancy Sensor
EEK***
Luminaire with
Integrated
EmergencyLuminaire
Hager Sollysta Wall Switch
(Retractable for Dimming)
WMPS12R
WMGS13R (Grid range)
7
CIBSE
Use Occupancy Sensors
Use Daylight Sensors
Have a Maintenance Plan
Daylight Link
Klik allows for automatic lighting
control which can provide energy
savings by not operating when
sufcient light levels exist.
Occupancy Sensing
Our range of occupancy sensors can
provide presence and absence control
of lighting, providing energy savings by
switching lights on or off depending on
the usage of the room.
Safe on-load connection
Luminaires can be connected in
seconds in absolute safety, without
circuit isolation, as all live contacts are
inaccessible and the earth connection
is made before any other, facilitating a
simplied maintenance plan.
Electro Mechanical Connection
All Klik plugs feature a unique plug-in
method which achieves a simultaneous
mechanical and electrical connection.
Trimming of lux level
DALI based occupancy sensors enable
trimming of lux level at commissioning
stage to ensure optimum nal lighting
levels, when used with compatible,
dimmable luminaire.
DALI Control
DALI (digital addressable
lighting interface) is a broadcast
communication system that brings
digital technology to lighting. Our 7 pin
Klik products offer full compatibility
with DALI control solutions.
Klik 3 / 4 Klik 7
Connection
Safe on-load connection / disconnection
Superior electromechanical connection
Control
Occupancy sensing for on / off control
Occupancy sensing for daylight linked on / off control
Lux level ‘trimming’ during commissioning
Automatic dimming (daylight linked)
Manual dimming (via wall switch)
DALI / DSI
Benefits - At a Glance
06
02 0301
0504
By following the information CIBSE provide, building operators, designers and employers
are better able to demonstrate compliance with UK building regulations and a number of
lighting related BS EN standards, by incorporating the following Klik features.
8
A Fast, Adaptable
& Secure Solution.
Providing an optimal lux level for the occupiers of a building is just one of the
often overlooked functions of a quality lighting connection system.
Klik 7 provides an adaptable solution to any challenge faced in designing
a modern, scalable lighting system, by ensuring the lux levels of dimmable
luminaires can be adjusted during commissioning and, most importantly, after
feedback from the occupiers.
9
The Value of Control
A basic level of control can be achieved easily with the use of occupancy sensors, by ‘trimming’
the lux level of dimmable luminaires to the required level at commissioning stage, helping to avoid
costly problems later.
As lighting technologies and their applications continue to evolve, so too must the lighting
connection systems used. The Klik range, with its combination of occupancy sensors, motion
detectors, ceiling roses and marshalling boxes, can facilitate the inclusion of more complex
control options as required.
Klik 7 provides all the benets of Klik 4, creating a truly scalable level of control when matched
with our sensors or other higher level supervisory systems, with the advantages associated with a
built in control pair.
Application 1 - Office with no natural light
Application Examples
Application 3 - Klik connection with 3rd party control
Application 2 - Office with windows on two sides
Zone A
Zone B
A B
Sensor settings Presence
Lux sensor used No
Wall switching None - auto only
Sensor settings Presence
Lux sensor used Optional
Wall switching Optional
Sensor settings Presence
Lux sensor used Yes
Wall switching Optional
- Two KLMB/KLDS marshalling boxes
- No natural light
- Standard or digital luminaires
- Auto on when entering room
- 20 Minute time out when vacant
- Two KLMB marshalling boxes
- Natural light on one side
- Digital luminaires
- Auto on when entering room
- 3rd Party head-end lighting control/supervisory system
- One dual supply KLMB marshalling boxes & one
standard KLMB box
- Auto on when entering room
- Natural light on two sides
- Digital luminaires adjacent to windows - standard or
digital luminaires elsewhere
- 2 x digital sensors & 1 x standard sensor.
- 20 minute time out when vacant
DALI / DSI
10
Klik 4
Klik 4 is a modular plug-in marshalling solution for lighting systems that
provides simultaneous mechanical and electrical connection in one click-
in action. Designed for on-load connection & disconnection, Klik 4 allows
individual light ttings to be removed or added without affecting other ttings
on the circuit.
3 pin moulded plugs and leads distribute switch live,
neutral and earth with 4 pin providing an additional
connection, normally a permanent live for emergency
lighting.
Pre-wired or self-wired plugs provide a highly
adaptable solution for when systems need to be
altered. Klik signicantly cuts down on installation
time by limiting the testing requirements at the
commissioning stage.
Klik 7
Delivering all the time saving, exibility and secure lighting connection benets of Klik
4, Klik 7 offers the additional benet of an embedded control pair for the dimming of
luminaires, providing a scalable approach to lighting control.
Developed to specically address the latest lighting technologies, Klik 7 has evolved
as an essential element of controllable lighting solutions.
Essential ‘trimming’ of lux levels to optimise the light in
a room can easily be implemented through the use of
DALI enabled Occupancy Sensors, which can then be
adjusted at the commissioning phase and if required,
after occupier feedback.
Klik 7 facilitates a truly scalable approach to lighting
control, without compromising speed, security or
exibility of installation.
From intelligent occupancy sensors to manage lux levels and common control
requirements, to sophisticated 3rd party ‘head end’ control and supervisory solutions,
Klik 7 facilitates all your lighting application requirements.
11
Klik 7 and DALI sensors were chosen to provide lighting
connection and control, to be installed in a Facebook Data
Centre in Clonee, Co. Meath, Ireland.
The 250 acre Clonee Data Centre is home to servers that
hold data from Instagram, WhatsApp, Messenger, and
Oculus. Introduced in 2015, construction began on the
€200m facility in April 2016 and rapidly grew to be the largest
construction project in Ireland at the time.
After 7.2 million hours completed on the construction site by
nearly 1,550 workers at peak, the rst two buildings called
Clonee 1 and 2, are now up and running. Clonne 3 is on
the path to completion and Facebook is hoping to have it
nished next year, while a planning application for Clonee
4 and 5 has been lodged. With the employment of 1,000
– 1,500 people for continuous periods of time, projects of
this nature are remarkably good for the local and regional
economy.
In an effort to stay energy efcient, Facebook designed an
agreement with Brookeld renewable Partners, conrming
that the site is 100% powered by wind energy and actively
investing in constructing renewable generation capacity.
At present, Facebook has stated it has added 2,500MW of
renewable infrastructure that includes solar, wind and hydro
globally in the last year alone and continues to increase as
time goes on.
Mercury Engineering needed a lighting solution for wiring all
the DALI ttings throughout the numerous data halls, and
ofce spaces that occupy the building. Hager presented
the Klik solution valued at €200k with the agreement to
customise the length and part numbers to match the
specications of the project. After the decision was nalised,
Mercury Engineering, distributor NEW and Hager worked
closely together to come to an arrangement on time-scale,
quantities and supply.
Hager’s Klik range is a solution for any lighting design
scenario. The Klik offer allows for automatic lighting control
that provides energy savings by not operating when there
are sufcient light levels present. With a range of settings
for daylight linked dimming, occupancy sensing and DALI
control, Klik was an ideal lighting solution for the Facebook
Data Centre project.
Klik 7
Case Study
Project Name: Facebook Data Centre
Location: Clonee, Co. Meath, Ireland.
Products Used: Klik 7 with DALI sensors
1212
Lighting
Connection
Lighting creates an impression. Klik, our lighting connection
system provides the roots to a buildings lighting system, allowing
it to adapt and grow with ease. Controls, including occupancy
sensors, ensure that light is only available when needed and
tailored to a users needs.
13
Page
Klik
Klik 7 14
Klik 4 22
Controls
Motion Detectors 19
Technical Pages 33
Data is subject to errors and technical modifications. New.
14
Klik 7
Marshalling Boxes, Plugs & Sockets
Marshalling Boxes - Wire In, Plug Out
Klik 7 Pre-wired Plugs with Sockets
Marshalling Boxes - Plug In, Plug Out
Characteristics:
-The KLMB marshalling box allows the connection and control of multiple luminaires. The marshalling box utilises a robust
extruded aluminium body.
-7 Pole.
-4, 6, 8, 10 & 12 outlets.
-16A Rated BS 5733:2010 .
-Short circuit tested: 1500A conditional rating.
Characteristics:
-Connections to the luminaire are made via a pre-wired plug and lead. All leads are low smoke zero halogen and are factory
connected and tested.
-Standard, digital and emergency luminaires.
-Short circuit tested: 1500A conditional rating.
-Cable standard BS 7211.
Characteristics:
-The KLMB marshalling box allows the connection and control of multiple luminaires. The marshalling box utilises a robust
extruded aluminium body.
-7 Pole.
-5, 7, 9 & 11 outlets.
-16A Rated BS 5733:2010 .
-Short circuit tested: 1500A conditional rating.
Description Cat ref.
Marshalling Box, Single Supply, Wire In, Plug Out
4 Way KLMB4W
6 Way KLMB6W
8 Way KLMB8W
10 Way KLMB10W
12 Way KLMB12W
Marshalling Box, Dual Channel, Wire In, Plug Out
8 Way, 4/4 KLMB244W
10 Way, 5/5 KLMB255W
12 Way, 6/6 KLMB266W
Description Cat ref.
Pre-wired Plugs and Sockets for Standard Luminaires
6A Luminaire Lead 1.5m 0.75mm² 3 Core Plug to Wire + KLPCR7 K7B1M075WPCR
6A Luminaire Lead 3m 0.75mm² 3 Core Plug to Wire + KLPCR7 K7B3M075WPCR
Pre-wired Plugs and Sockets for Standard Luminaires with Emergency
6A Luminaire Lead 1.5m 0.75mm² 4 Core Plug to Wire + KLPCR7 K7J1M075WPCR
6A Luminaire Lead 3m 0.75mm² 4 Core Plug to Wire + KLPCR7 K7J3M075WPCR
Pre-wired Plugs and Sockets for Dimmable Luminaires
6A Luminaire Lead 1.5m 0.75mm² 5 Core Plug to Wire + KLPCR7 K7P1M075WPCR
6A Luminaire Lead 3m 0.75mm² 5 Core Plug to Wire + KLPCR7 K7P3M075WPCR
Pre-wired Plugs and Sockets for Dimmable Luminaires with Emergency
6A Luminaire Lead 1.5m 0.75mm 6 Core Plug to Wire + KLPCR7 K7T1M075WPCR
6A Luminaire Lead 3m 0.75mm 6 Core Plug to Wire + KLPCR7 K7T3M075WPCR
Description Cat ref.
Marshalling Box, Single Supply, Plug In, Plug out
5 Way KLMB5P
7 Way KLMB7P
9 Way KLMB9P
11 Way KLMB11P
KLMB4W
KLMB5P
K7B1M075WPCR
Data is subject to errors and technical modifications. New. 15
Klik 7
Pre-wired Plugs
Klik 7 Pre-wired Plugs
Description Cat ref.
Pre-wired Plugs for Standard Luminaires
6A Luminaire Lead 1.5m 0.75mm² 3 Core Plug to Wire K7B1M075W
6A Luminaire Lead 3m 0.75mm² 3 Core Plug to Wire K7B3M075W
6A Luminaire Lead 5m 0.75mm² 3 Core Plug to Wire K7B5M075W
6A Luminaire Lead 7m 0.75mm² 3 Core Plug to Wire K7B7M075W
10A Luminaire Lead 1.5m 1mm² 3 Core Plug to Wire K7B1M1W
10A Luminaire Lead 3m 1mm² 3 Core Plug to Wire K7B3M1W
10A Luminaire Lead 5m 1mm² 3 Core Plug to Wire K7B5M1W
10A Luminaire Lead 7m 1mm² 3 Core Plug to Wire K7B7M1W
16A Luminaire Lead 3m 1.5mm² 3 Core Plug to Wire K7B3M15W
16A Luminaire Lead 5m 1.5mm² 3 Core Plug to Wire K7B5M15W
Pre-wired Plugs for Standard Luminaires with Emergency
6A Luminaire Lead 1.5m 0.75mm² 4 Core Plug to Wire K7J1M075W
6A Luminaire Lead 3m 0.75mm² 4 Core Plug to Wire K7J3M075W
6A Luminaire Lead 5m 0.75mm² 4 Core Plug to Wire K7J5M075W
6A Luminaire Lead 7m 0.75mm² 4 Core Plug to Wire K7J7M075W
6A Luminaire Lead 9m 0.75mm² 4 Core Plug to Wire K7J9M075W
10A Luminaire Lead 1.5m 1mm² 4 Core Plug to Wire K7J1M1W
10A Luminaire Lead 3m 1mm² 4 Core Plug to Wire K7J3M1W
10A Luminaire Lead 5m 1mm² 4 Core Plug to Wire K7J5M1W
10A Luminaire Lead 7m 1mm² 4 Core Plug to Wire K7J7M1W
10A Luminaire Lead 9m 1mm² 4 Core Plug to Wire K7J9M1W
16A Luminaire Lead 3m 1.5mm² 4 Core Plug to Wire K7J3M15W
16A Luminaire Lead 5m 1.5mm² 4 Core Plug to Wire K7J5M15W
16A Luminaire Lead 3m 1.5mm² 4 Core Plug to Plug K7J3M15P
16A Luminaire Lead 5m 1.5mm² 4 Core Plug to Plug K7J5M15P
16A Luminaire Lead 7m 1.5mm² 4 Core Plug to Plug K7J7M15P
Pre-wired Plugs for Emergency Exit Luminaires
16A Luminaire Lead 3m 1.5mm² 3 Core Plug to Wire K7E3M15W
16A Luminaire Lead 5m 1.5mm² 3 Core Plug to Wire K7E5M15W
16A Luminaire Lead 7m 1.5mm² 3 Core Plug to Wire K7E7M15W
16A Luminaire Lead 11m 1.5mm² 3 Core Plug to Wire K7E11M15W
Characteristics:
-Connections to the luminaire are made via a pre-wired plug and lead. All leads are low smoke zero halogen and are factory
connected and tested.
-Standard, digital and emergency luminaires.
-Short circuit tested: 1500A conditional rating.
-Cable standard BS 7211.
-New for 2019 - references with 1m cable length will be provided as 1.5m.
We have recently improved our range of Klik 7 pre-wired leads. As part of this process, we have changed how our part
references work. For example will now become . For a full supercession chart, see page 30.KLB/3/0-75W K7B3M075W
K7B1M075W
K7J1M075W
A B Link Lead, Power Standard Luminaire Emergency Exit LuminaireE
G Link Lead, Power, Emergency Standard Luminaire, Emergency Switch Drop LeadJ F
K Link Lead, Power, Emergency, Switched Line Dimmable Luminaire Control, +/- & CpcP W
Z Link Lead, Power, Emergency, Switched Line, Control Dimmable Luminaire, EmergencyT
K7 B 3M 075 W
Range Function Length Core Size Wired or
Plug End
Data is subject to errors and technical modifications. New.
16
Klik 7
Pre-wired Plugs
Klik 7 Pre-wired Plugs for Dimmable Luminaires
Description Cat ref.
Pre-wired Plugs for Dimmable Luminaires
6A Luminaire Lead 1.5m 0.75mm² 5 Core Plug to Wire K7P1M075W
6A Luminaire Lead 3m 0.75mm² 5 Core Plug to Wire K7P3M075W
6A Luminaire Lead 5m 0.75mm² 5 Core Plug to Wire K7P5M075W
6A Luminaire Lead 7m 0.75mm² 5 Core Plug to Wire K7P7M075W
10A Luminaire lead 1.5m 1mm2 5 core Plug to Wire K7P1M1W
10A Luminaire Lead 3m 1mm² 5 Core Plug to Wire K7P3M1W
10A Luminaire Lead 5m 1mm² 5 Core Plug to Wire K7P5M1W
10A Luminaire Lead 7m 1mm² 5 Core Plug to Wire K7P7M1W
16A Luminaire lead 1.5m 1.5mm² 5 core Plug to Wire K7P1M15W
16A Luminaire Lead 3m 1.5mm² 5 Core Plug to Wire K7P3M15W
16A Luminaire Lead 5m 1.5mm² 5 Core Plug to Wire K7P5M15W
16A Luminaire Lead 7m 1.5mm² 5 Core Plug to Wire K7P7M15W
Pre-wired Plugs for Dimmable Luminaires with Emergency
6A Luminaire Lead 1.5m 0.75mm² 6 Core Plug to Wire K7T1M075W
6A Luminaire Lead 3m 0.75mm² 6 Core Plug to Wire K7T3M075W
6A Luminaire Lead 5m 0.75mm² 6 Core Plug to Wire K7T5M075W
6A Luminaire Lead 7m 0.75mm² 6 Core Plug to Wire K7T7M075W
10A Luminaire Lead 1.5m 1mm² 6 Core Plug to Wire K7T1M1W
10A Luminaire Lead 3m 1mm² 6 Core Plug to Wire K7T3M1W
10A Luminaire Lead 5m 1mm² 6 Core Plug to Wire K7T5M1W
10A Luminaire Lead 7m 1mm² 6 Core Plug to Wire K7T7M1W
16A Luminaire Lead 3m 1.5mm² 6 Core Plug to Wire K7T3M15W
16A Luminaire Lead 5m 1.5mm² 6 Core Plug to Wire K7T5M15W
16A Luminaire Lead 3m 1.5mm² 6 Core Plug to Plug K7T3M15P
16A Luminaire Lead 5m 1.5mm² 6 Core Plug to Plug K7T5M15P
16A Luminaire Lead 7m 1.5mm² 6 Core Plug to Plug K7T7M15P
K7T3M075W
Data is subject to errors and technical modifications. New. 17
Klik 7
Pre-wired Link Leads, Ceiling Roses, Wireable Plug
Klik 7 Pre-wired Marshalling Box Link Leads
Description Cat ref.
Pre-wired Link Leads - L, N, CPC
16A Luminaire Lead 10m 1.5mm² 3 Core Plug to Plug K7A10M15P
16A Luminaire Lead 5m 1.5mm² 3 Core Plug to Plug K7A5M15P
Pre-wired Link Leads - L, N, CPC, Emergency
16A Link Lead 10m 1.5mm² 4 Core Plug to Plug K7G10M15P
16A Link Lead 5m 1.5mm² 4 Core Plug to Plug K7G5M15P
Pre-wired Link Leads - L, N, SL, CPC, Emergency
16A Link Lead 5m 1.5mm² 5 Core Plug to Plug K7K5M15P
Pre-wired Link Leads - CPC, DA+, DA-
6A DALI Link Lead 3m 0.75mm² 3 Core Plug to Wire K7W3M075W
6A DALI Link Lead 5m 0.75mm² 3 Core Plug to Wire K7W5M075W
Pre-wired Link Leads - L, N, SL, CPC, DA+, DA-, Emergency
16A Link Lead 3m 1.5mm² 7 Core Plug to Plug K7Z3M15P
16A Link Lead 5m 1.5mm² 7 Core Plug to Plug K7Z5M15P
Characteristics:
-The link leads are used to connect KLMB to KLMB. All leads are low smoke zero halogen and are factory connected and
tested. Note: to ensure correct link lead selection see the connection key on page .
-1.5mm2 CSA.
-3m, 5m & 10m lengths.
-Standard, Digital and Emergency Luminaires.
-16A Rated.
-BS 5733:2010, BS EN 61535.
-Short circuit tested: 1500A conditional rating.
-Cable standard BS 6500 & BS 7211.
K7A3M15P
Ceiling Roses
Wireable / Rewireable Plug
Description Cat ref.
16A 7 Pin Ceiling Rose KLPCR/7
16A 7 Pin Wireable Plug & Ceiling Rose K7PLUGPCR
Description Cat ref.
16A Wireable Klik 7 Plug K7PLUG
KLPCR7
K7PLUG
Characteristics:
-7 Pole conduit box / surface connector to allow the easy connection of digital lighting within traditional fixed wire installations.
The connector is fitted directly to trunking or conduit allowing the luminaire to be connected / disconnected via the pluggable
luminaire lead.
-7 Pole.
-16A Rated.
-Standards: BS 5733:2010.
-Short circuit tested: 1500A conditional rating.
Characteristics:
-7 Terminal plug, enabling you to make leads on site to the configuration required.
-Complies with BS EN 61535-2009+A1-2013
-Enables you to add the plug after cable routing, for example when cables pass through walls.
K7PLUGPCR
Data is subject to errors and technical modifications. New.
18
Klik 7
Occupancy Sensors, Remote Controls
Occupancy Sensors with Remote Programming & Control Options
Characteristics:
-EEK520B - Detector for control of digital (DSI/DALI) luminaires
-Direct control of a light load.
-Lux level and ON delay adjustable via potentiometers or remote control.EEK001
-DALI/DSI bus output accommodates up to 24 ballasts.
-230V wall switch override.
-Presence or absence detection available.
-EEK523P EEK520B - As but pre-wired with 3m Lead
-EEK525P EEK520B - As but pre-wired with 5m Lead
-EEK513P - detector for control of standard luminaires (On/Off)
-Presence or Absence detection available.
-Programmable from EEK001
-7m Range
-EEK515P EEK513P - As but pre-wired with 5m Lead
-EEK001 - IR programming tool
-Installer remote control to commission settings.
-EEK002 - IR remote control
-Customer remote control for override operation.
-Complies with BS EN 60669-1 & BS EN 60669-2-1.
Description Cat ref.
Wireable Digital PIR Occupancy Sensor - Dimmable & Daylight Linked EEK520B
Pluggable Digital PIR Occupancy Sensor 3m lead - Dimmable & Daylight Linked EEK523P
Pluggable Digital PIR Occupancy Sensor 5m lead - Dimmable & Daylight Linked EEK525P
Flush Mounted Standard Occupancy Sensor (without cable) EEK510B
Pluggable PIR Occupancy Sensor 3m lead - On / Off & Daylight Linked EEK513P
Pluggable PIR Occupancy Sensor 5m lead - On / Off & Daylight Linked EEK515P
Pre-Wired PIR Occupancy Sensor 3m lead - On / Off & Daylight Linked EEK513W
Programming Tool EEK001
Remote Control for the End User EEK002
Backbox Accessory for Surface BESA Detectors EEK005
EEK515P
EEK001
Data is subject to errors and technical modifications. New. 19
Special Applications
Occupancy Sensors, Motion Detectors
Semi-Recessed Occupancy Sensor
Hyper Frequency Detector
Corridor Motion Detector
Characteristics:
-The presence area is especially suitable in offices, where there may be notional corridors.
-EE810 - 1 channel detector
-Provides direct control of a light load or can be used as a slave with for enlargement of detection area.EE811
-Lux level and ON delay (duration or pulse) defined via potentiometers.
-Test mode in order to set lux level and the detection pattern.
-EE811 - 2 channel detector
-Lux level and ON delay adjustable via potentiometers.
-Input for slave ( ) and/or remote push button.EE810
-230V wall switch override.
-Complies with BS EN 60669-1 & BS EN 60669-2-1.
Characteristics:
-The detection range diameter is adjustable from one to eight metres. The hyper frequency sensor allows for detection of
movement through partitions (drywall, wood, glass) independent of temperature detection.
Features
-230V AC.
-IP54 rated.
-Detection area 360º.
-Complies with BS EN 60669-1, BS EN 60669-2-1.
Characteristics:
-Infra-redcorridor motion detectorfor surface mounting.
Features
-230V AC.
-IP54 rated.
-Detection zone of 4m x 20m.
-Overrun timer from 5 seconds to 15 minutes.
-Complies with BS EN 60669-1 & BS EN 60669-2-1.
Description Cat ref.
Presence Detector 1 Channel EE810
Presence Detector 2 Channel EE811
Surface Mounting Box for and EE810 EE811 EE813
Description Cat ref.
360º Hyper Frequency Sensor EE883
Protection Basket for Hyper Frequency Sensor EEK006
Description Cat ref.
PIR Corridor Motion Detector EE880
EE883
EE880
EE810
20
Klik LCM’s (Lighting Control Module) enable the control of an
area with up to 4 different control groups. Each group of outputs
can control standard switched and/ or digital dimmable (DALI/
DSI) luminaires. The control module can be connected to up to
4 SELV occupancy sensors and up to 4 wall switch overrides
(double retractive, centre off). Any switch or occupancy sensor
can be assigned to any output.
The programming is carried out with iPad and communicates
with the LCM via Bluetooth. We’ve also recently introduced an
LCM which allows for local physical disconnection of bluetooth
technology, for use in security sensitive applications.
SELV Switching / Dimming
Each channel is capable of being switched via one
of 4 or more switch inputs.
Sensor with integral lux sensor (SELV)
This allows daylight dimming and switching utilising
any natural light available
Scene setting
4 lighting scenes are possible (plus global Up/
Down-On/Off) controlled via centre-off 2 pole
retractive grid switch modules and 2 separate scene
proles are available.
Partition switch
This allows total and separate control of a room with
a partition and switch tted.
Integral emergency test timers
Emergency test carried out via an emergency test
switch (can be set for up to 5 hours). Whilst on test
the other luminaires will dim to a pre-set value.
Presence & absence sensing
Each output channel can be set to Presence or
Absence individually.
Light level offset between channels
This function allows phasing channels to set as a
percentage of the lead channel (e.g. 10%, 60%,
80%, 100%).
Corridor hold
Linking LCMs with RJ45 lead to hold designated
corridor area
Bluetooth local disconnection
LCM references with BT sufx: Bluetooth function
can be locally disconnected for enhanced security
applications.
Three level timeout
At timeout, lighting can turn Off or Dim down in
three stages.
Dimming - DSI, DALI (Broadcast)
Broadcast on the required channel to all connected
luminaire
Klik
Lighting Control
Module
Data is subject to errors and technical modifications. New. 21
Klik 7
Lighting Control Module, Sensors, Switch Drop Leads, Link Leads
KLO15RJ45R
WMGS13R
Lighting Control Module Switch Drop Leads (Grey)
User Controls
Characteristics:
- RJ45 to switch (wire-in) lead available in a variety of lengths.
- SELV.
- Cables supplied standard with RJ45 plug on both ends.
Note: for retractive wall switch, please see below
Characteristics:
- Our Sollysta grid retractive wall switches make the perfect user control companion to the LCM.
- Other grid nishes are available, please see our Wiring Accessories Catalogue for the full range.
Description Cat ref. Red Cat ref. Grey
RJ45 SELV Switch Drop Lead
5m KLO5RJ45R KLO5RJ45G
10m KLO10RJ45R KLO10RJ45G
15m KLO15RJ45R KLO15RJ45G
20m KLO20RJ45R KLO20RJ45G
30m KLO30RJ45R KLO30RJ45G
40m KLO40RJ45R KLO40RJ45G
50m KLO50RJ45R KLO50RJ45G
RJ45 Splitter KLORJ45CON
Description Cat ref.
Sollsyta Grid Retractive Wall Switch
1 Gang Grid Plate WMGP1
1 Gang Grid Frame WMGF1
2 Way & Centre Off Retractive Wall Switch WMGS13R
KLO15RJ45G
Lighting Control Module with KlikLink
Lighting Control Module Occupancy Sensors
Characteristics:
- The KLCM allows connection and control of multiple luminaires with four separate channels.
- Switching, dimming (DSI & DALI), corridor hold, partition switching, daylight switching & dimming, scene settings, integral
emergency test times, reset proles, light level offset (channel to channel).
- Setting up of is acomplished via KlikLink app, available on iOS for iPad.KLCM
- For technical data, see page 36
Characteristics:
- Klik SELV LCM occupancy sensors come complete with a 10m RJ11 lead and have integrated daylight sensing.
- Sensing options are selected via the KlikLink app (e.g. presence/absence).
- KLCM-3OS is designed for use as a corridor sensor.
- KLCM-5OS is designed for use as a whole room sensor.
Description Cat ref.
13 Way 4 Channel LCM Wire in, Plug out KLCM413W
13 Way 4 Channel LCM Wire in, Plug out, 230V EM Test Override KLCM413WIET
13 Way 4 Channel LCM Wire in, Plug out, with bluetooth disconnect switch KLCM413WBT
13 Way 4 Channel LCM Wire in, Plug out, 230V EM Test Override, with bluetooth disconnect switch KLCM413WETBT
KlikLink iPad App (Free of charge) Search KlikLink in
iPad App Store
Description Range Cat ref.
Klik LCM Occupancy Sensor with 1 Sensor Head 5m KLCM-OS
Klik LCM Occupancy Sensor with 1 Sensor Head 10m KLCM-1OS
Klik LCM Corridor Sensor with 3 Sensor Heads 15 x 5m KLCM-3OS
Klik LCM Wide Area Sensor with 5 Sensor Heads 15 x 15m KLCM-5OS
KLCM-OS
KLCM-5OS
KLCM413W
KlikLink App (Shown on iPad,
not included)
Data is subject to errors and technical modications. New.
22
Klik 4
Marshalling Boxes, Pre-wired Plug-in Ceiling Roses
Marshalling Boxes
3 Pin Pre-wired 6A Plug-in Ceiling Rose
4 Pin (Including Auxiliary) Pre-wired 6A Plug-in Ceiling Rose
Characteristics:
- Klik marshalling boxes are used in conjunction with Klik 3 and 4 pin plugs to connect luminaires within an area. The Klik
marshalling box can be separated into two independently switched circuits. These circuits can be controlled via wall switch
or occupancy sensor.
- Complies with BS 5733:2010.
- Main terminal rating: 16 Amps.
- Socket outlet rating: 6 Amps.
- Separate terminals for exible conductors, rating: 10 Amps.
- Short circuit tested 1500A conditional rating.
- Socket outlets accept either Klik lighting (3 pin) plugs, Klik auxiliary (4 pin) plugs.
Characteristics:
- 6A pre-wired plug-in ceiling roses are used to connect luminaires to a xed wiring installation.
- Complies with BS 6972 and BS 5733:2010.
- PVC exible cord complies with BS EN 50525-2-11.
- Low smoke zero halogen exible cord, complies with BS EN 50525-3-11.
- All leads have prepared ends.
Characteristics:
- Auxiliary 6A pre-wired plug-in ceiling roses are used to connect luminaires to a xed wiring installation.
- Complies with BS 6972 and BS 5733:2010.
- PVC exible cord complies with BS EN 50525-2-11.
- Low smoke zero halogen exible cord, complies with BS EN 50525-3-11.
- All leads have prepared ends.
Description Cat ref.
4 Way Klik Lighting Distribution Unit KLDS4
6 Way Klik Lighting Distribution Unit KLDS6
8 Way Klik Lighting Distribution Unit KLDS8
10 Way Klik Lighting Distribution Unit KLDS10
12 Way Klik Lighting Distribution Unit KLDS12
6 Way Klik Lighting Distribution Unit - Black KLDS6BLACK
Description Box Quantity PVC Cat ref. LSZH Cat ref.
6A Plug-in Ceiling Rose with 0.75mm² Flexible Cord
1 Metre 10 PCR2000/1 .0 PCR2000/LSF/1.0
2 Metre 10 PCR2000/2.0 PCR2000/LSF/2.0
3 Metre 5 PCR2000/3.0 PCR2000/LSF/3.0
4 Metre 5 PCR2000/4.0 PCR2000/LSF/4.0
6A Plug-in Ceiling Rose with 1mm² Flexible Cord
2 Metre 10 PCR2000/1.0PVC/2 PCR2000/1.0LSF/2
3 Metre 5 PCR2000/1.0PVC/3 PCR2000/1.0LSF/3
4 Metre 5 PCR2000/1.0PVC/4 PCR2000/1.0LSF/4
5 Metre 5 PCR2000/1.0PVC/5 PCR2000/1.0LSF/5
Description Box Quantity PVC Cat ref. LSZH Cat ref.
6A Pre-wired Ceiling Rose with 0.75mm² Flexible Cord
1 Metre 10 CR64AX/1.0 CR64AX/LSF/1.0
2 Metre 10 CR64AX/2.0 CR64AX/LSF/2.0
3 Metre 5 CR64AX/3.0 CR64AX/LSF/3.0
4 Metre 5 CR64AX/4.0 CR64AX/LSF/4.0
6A Pre-wired Ceiling Rose with 1mm² Flexible Cord
2 Metre 10 CR64AX/1.0PVC/2 CR64AX/1.0LSF/2
3 Metre 5 CR64AX/1.0PVC/3 CR64AX/1.0LSF/3
4 Metre 5 CR64AX/1.0PVC/4 CR64AX/1.0LSF/4
5 Metre 5 CR64AX/1.0PVC/5 CR64AX/1.0LSF/5
KLDS4
PCR2000/1.0
CR64AX/1.0
KLDS6BLACK
Data is subject to errors and technical modications. New. 23
Klik 4
Pre-wired Plugs
3 Pin Pre-wired 6A Plugs
4 Pin (Including Auxiliary) Pre-wired 6A Plugs - White
Characteristics:
-6A pre-wired plugs are used to connect luminaires to a Klik ceiling rose or marshalling box. All leads have prepared ends.
-Complies with BS 6972 and BS 5733:2010.
-PVC flexible cord complies with BS EN 50525-2-11.
-Low smoke zero halogen flexible cord, complies with BS EN 50525-3-11.
Characteristics:
-Klik auxiliary 6A pre-wired plugs are used to connect luminaires to a Klik ceiling rose or marshalling box.
-Complies with BS 6972 and BS 5733:2010.
-PVC flexible cord complies with BS EN 50525-2-11.
-Low smoke zero halogen flexible cord, complies with BS EN 50525-3-11.
-All leads have prepared ends.
Description Quantity PVC Cat ref. LSZH Cat ref.
6A Pre-wired Plugs with 0.75mm² Flexible Cord
1 Metre 10 P22/1.0 P22/LSF/1.0
2 Metre 10 P22/2.0 P22/LSF/2.0
3 Metre 5 P22/3.0 P22/LSF/3.0
4 Metre 5 P22/4.0 P22/LSF/4.0
6A Pre-wired Plugs with 1mm² Flexible Cord
2 Metre 10 P22/1.0PVC/2 P22/1.0LSF/2
3 Metre 5 P22/1.0PVC/3 P22/1.0LSF/3
4 Metre 5 P22/1.0PVC/4 P22/1.0LSF/4
5 Metre 5 P22/1.0PVC/5 P22/1.0LSF/5
Description Quantity PVC Cat ref. LSZH Cat ref.
6A Pre-wired Plugs with 0.75mm² Flexible Cord
1 Metre 10 P64AX/1.0 P64AX/LSF/1.0
2 Metre 10 P64AX/2.0 P64AX/LSF/2.0
3 Metre 5 P64AX/3.0 P64AX/LSF/3.0
4 Metre 5 P64AX/4.0 P64AX/LSF/4.0
6A Pre-wired Plugs with 1mm² Flexible Cord
2 Metre 10 P64AX/1.0PVC/2 P64AX/1.0LSF/2
3 Metre 5 P64AX/1.0PVC/3 P64AX/1.0LSF/3
4 Metre 5 P64AX/1.0PVC/4 P64AX/1.0LSF/4
5 Metre 5 P64AX/1.0PVC/5 P64AX/1.0LSF/5
P22/1.0
P64AX/1.0
4 Pin (Including Auxiliary) Pre-wired 6A Plugs - Red
Characteristics:
-Klik auxiliary 6A pre-wired plugs are used to connect luminaires to a Klik ceiling rose or marshalling box.
-Complies with BS 6972 and BS 5733:2010.
-PVC flexible cord complies with BS EN 50525-2-11.
-Low smoke zero halogen flexible cord, complies with BS EN 50525-3-11.
-All leads have prepared ends.
Description Quantity PVC Cat ref. LSZH Cat ref.
6A Pre-wired Plugs with 0.75mm² Flexible Cord
1 Metre 10 P64AXR/1.0 P64AXR/LSF/1.0
2 Metre 10 P64AXR/2.0 P64AXR/LSF/2.0
3 Metre 5 P64AXR/3.0 P64AXR/LSF/3.0
4 Metre 5 P64AXR/4.0 P64AXR/LSF/4.0
6A Pre-wired Plugs with 1mm² Flexible Cord
2 Metre 1.00mm² Flexible Cord 10 P64AXR/1.0PVC/2 P64AXR/1.0LSF/2
3 Metre 1.00mm² Flexible Cord 5 P64AXR/1.0PVC/3 P64AXR/1.0LSF/3
4 Metre 1.00mm² Flexible Cord 5 P64AXR/1.0PVC/4 P64AXR/1.0LSF/4
5 Metre 1.00mm² Flexible Cord 5 P64AXR/1.0PVC/5 P64AXR/1.0LSF/5
P64AXR/1.0
Data is subject to errors and technical modifications. New.
24
Klik 4
Plugs, Ceiling Roses
3 Pin Plug-in Ceiling Rose & Cover
Characteristics:
-The 6A plug-in ceiling rose is used to offer a pluggable connection for luminaires. The luminaire can be connected and
disconnected under load.
-Complies with BS 5733:2010.
-Sockets have 4 terminations: line, neutral, CPC and loop-in.
-Plugs have 3 terminations: line, neutral and CPC.
-Fixing: 50.8mm Standard Diagonal (BESA).
Description Quantity Cat ref.
3 Pin Plug-in Ceiling Rose White 10 PCR2000
3 Pin Plug-in Ceiling Rose Black 10 PCR2000BLACK
PCR2000
Spare Ceiling Rose Cover
4 Pin (including Auxiliary) Plug-in Ceiling Rose & Cover
Characteristics:
-Klik 6A pre-wired plug-in ceiling roses are used to connect luminaires to a fixed wiring installation. Auxiliary contact available,
a typical use is for emergency lighting.
-Complies with BS 6972 and BS 5733:2010.
-Sockets have 5 terminations: line, neutral, CPC, auxiliary and loop-in.
-Plugs have 4 terminations: line, neutral, CPC and auxiliary.
Description Quantity Cat ref.
Ceiling Rose Cover White 10 A1
Ceiling Rose Cover Red 10 A1/R
Ceiling Rose Cover Black 10 A1BLACK
Description Quantity Cat ref.
4 Pin Plug-in Ceiling Rose White 10 CR64AX
4 Pin Plug-in Ceiling Rose Red 10 CR64AX/R
A1/R
CR64AX/R
3 Pin Plug
4 Pin (Including Auxiliary) Plug
Characteristics:
-Klik 3 pin plugs are used to connect into a Klik socket giving a pluggable connection to luminaires.
-Complies with BS 6972 and BS 5733:2010.
-Suitable for use with any Klik 3 or 4 pin socket.
-P22 plug is supplied in a plug-in ceiling rose, cat ref. .PCR2000
-Plugs have 3 terminations: line, neutral and CPC.
Warning: Plugs must not be fitted on the supply side of any installation - they must be connected to the load / fitting /
appliance side of the installation.
Characteristics:
-Klik plugs with auxiliary pin are used to connect into the Klik sockets giving a pluggable connection to luminaires.
-Complies with BS 6972 and BS 5733:2010.
-Suitable for use with any Klik 4 pin sockets.
-P64AX plug is supplied in a plug-in ceiling rose, Cat. ref. .CR64AX
-Plugs have 4 terminations: line, neutral, CPC and auxiliary.
Warning: Plugs must not be fitted on the supply side of any installation - they must be connected to the load / fitting /
appliance side of the installation.
Description Quantity Cat ref.
3 Pin Plug White 10 P22
3 Pin Plug Black 10 P22BLACK
Description Quantity Cat ref.
4 Pin Plug White 10 P64AX
4 Pin Plug Red 10 P64AX/R
P64AX/R
P22
Data is subject to errors and technical modifications. New. 25
Klik 4
Socket Outlets, Mounting Boxes
3 Pin Plug Socket Outlets
4 Pin (Including Auxiliary) Plug Socket Outlets
Moulded Mounting Boxes
Characteristics:
-6A socket outlets are used in conjunction with 6A plugs to provide a pluggable connection to luminaires.
-Complies with BS 6972 and BS 5733:2010.
-Suitable for use with standard Klik 3 pin plug.
-S27 PCR2000 socket is supplied in plug-in ceiling rose, Cat. Ref. .
-S27 A1 socket will accept cover.
-S26/TC S26 socket is an architrave socket pre-assembled with a trunking clamp.
Characteristics:
-Klik auxiliary 6A socket outlets are used in conjunction with Klik auxiliary 6A plugs to provide a pluggable connection to
luminaires.
-Complies with BS 6972 and BS 5733:2010.
-Suitable for use with standard Klik 4 pin plug.
-S64AX PCR2000 socket is supplied in plug-in ceiling rose, Cat. Ref. .
-S64AX A1 socket will accept cover.
-S65AX socket is a square variant.
-All sockets have 5 terminations: line, neutral, CPC, auxiliary and loop-in.
-Can be used with Klik 3 or 4 pin plug.
Description Quantity Cat ref.
3 Pin Round Socket White 10 S27
Description Quantity Cat ref.
4 Pin Round Socket White 10 S64AX
4 Pin Round Socket Black 10 S64BLACK
Description Quantity Cat ref.
Round Surface Box White 10 MB2
S27
S64AX
S64BLACK
MB2
Produktspecifikationer
| Varumärke: | Hager |
| Kategori: | Växla |
| Modell: | K7F5M1W |
Behöver du hjälp?
Om du behöver hjälp med Hager K7F5M1W ställ en fråga nedan och andra användare kommer att svara dig
Växla Hager Manualer
3 April 2025
3 April 2025
31 Mars 2025
31 Mars 2025
31 Mars 2025
31 Mars 2025
31 Mars 2025
6 Februari 2025
6 Februari 2025
2 Januari 2025
Växla Manualer
- Växla Atlona
- Växla Luxul
- Växla Alecto
- Växla KVM-TEC
- Växla Micro Connect
- Växla PreSonus
- Växla BZBGear
- Växla Cooking Performance Group
- Växla Basetech
- Växla Triax
- Växla Renkforce
- Växla Kemo
- Växla Homematic IP
- Växla WHALE
- Växla Plantronics
Nyaste Växla Manualer
9 April 2025
9 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
2 April 2025
1 April 2025
1 April 2025