Hager WBHC2 Bruksanvisning


Läs gratis den bruksanvisning för Hager WBHC2 (1 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 4 recensioner. Har du en fråga om Hager WBHC2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
Hager Electro Pty. Ltd. - Unit 1/170 Power Street Glendenning NSW 2761 - Tel. 1300 850 253 - Fax. 1300 424 372 - www.hagerelectro.com.au
WIS0020C10
117
25
77
26
21
Specifications:
WBHC - 2 x Separate circuits, 10A, 250V AC
2 x looping terminals
WBHC2XX - 2 x Separate circuits, 10A, 250V AC
2 x looping terminals
2 x 16AX mechanisms
This keycard switch is fitted with a neon indicator
which is lit when the keycard is not inserted into
the switch. Should you wish to use this function,
circuit 1 must be connected to power.
C 12
C 12
A-Line
Neutral
Load
A-Line
Load
Neutral
WBHC2
Keycard inserted
WBHC2
Keycard inserted
WIS0020C10
WBHC2/WBHC2XX
Wiring diagram
to connect
2 x 10A circuits
Wiring diagram for use with
normally closed contactor.
To be used where noiseless
contactor operation is critical,
e.g. bedrooms
A-Line
N.C Contactor
Neutral
Load
Neutral
Normally
Closed
W
BHC2
C 12
Keycard not inserted
W
BHC2
Wiring diagram when using
a normally open contactor
A-Line
A-Line
N.O Contactor
Neutral
Load
Neutral
Normally
Open
C 12
Keycard not inserted


Produktspecifikationer

Varumärke: Hager
Kategori: ej kategoriserat
Modell: WBHC2

Behöver du hjälp?

Om du behöver hjälp med Hager WBHC2 ställ en fråga nedan och andra användare kommer att svara dig