Hager WGCXL2D12NEG Bruksanvisning
Sidor 4 brytare
Läs bruksanvisningen för Hager WGCXL2D12NEG gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 61 gånger. Fråga om modellen? Ställ en fråga
www.hager.com
Safety instructions
Electrical equipment must only be installed and assembled by a qualied
electrician in accordance with the relevant installation standards, regulations,
directives and safety and accident prevention directives of the country.
Failure to comply with these installation instructions may result in damage to
the device, re or other hazards.
Function/Correct use
-Mechanical double pole switches/control switches for electrical installations in
buildings.
-For switching hard-wired electrical appliances.
-With earthing contact for bonding connected loads to protective earth.
-Control switches equipped with LED indicator per each rocker.
-For the flush-mounted installation in standard wall boxes (recommended wall box
depth ≥ 35 mm). Attention: When installed in metal wall box, the box must be
connected with earth directly.
-Only suitable for use in indoor areas with no drip and no spray water.
Technical data
Rated voltage: 250 V~
Frequency: 50/60 Hz
Rated current: max. 20 AX
Conductor cross-section of screw terminals: max. 3 x 2,5 mm²
Distance of fixing holes: 60.3 mm
Switch compliance: BS EN 60669-1, IEC 60669-1
20AX DP switches
20AX DP control switches
Hager Muse / Hager Inspire
Installation manual
Produktspecifikationer
| Varumärke: | Hager |
| Kategori: | brytare |
| Modell: | WGCXL2D12NEG |
Behöver du hjälp?
Om du behöver hjälp med Hager WGCXL2D12NEG ställ en fråga nedan och andra användare kommer att svara dig