Hager WGDCH4 Bruksanvisning

Hager Inte kategoriserad WGDCH4

Läs gratis den bruksanvisning för Hager WGDCH4 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 5 recensioner. Har du en fråga om Hager WGDCH4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

www.hager.com

Safety instructions

Electrical equipment must only be installed and assembled by a qualied

electrician in accordance with the relevant installation standards, regulations,

directives and safety and accident prevention directives of the country.

Failure to comply with these installation instructions may result in damage to

the device, re or other hazards.

Function

Multiple frames for 2gang to 5gang combinations of ush-mounted devices.

The frames are suitable for vertical as well as for horizontal installation.

Correct use

- For ush-mounted installation with standard connectable wall boxes.

- Only suitable for use in indoor areas with no drip and no spray water.

Technical data

For horizontal installation:

Dimensions (Width x Height)

- 2gang: 170.2 x 86 mm

- 3gang: 256.3 x 86 mm

- 4gang: 342.3 x 86 mm

- 5gang: 428.3 x 86 mm

For vertical installation:

Dimensions (Width x Height)

- 2gang: 86 x 170.2 mm

- 3gang: 86 x 256.3 mm

- 4gang: 86 x 342.3 mm

- 5gang: 86 x 428.3 mm

Multi-gang frames

2gang / 3gang / 4gang / 5gang

Hager Dream

Installation manual

Information for electricians

Installation and electrical connection

Preparing the devices for installation

Remove cover at every single device to be combined (see installation manual of the

respective device).

Connecting the devices for multiple combinations

(for example with "3gang frame (horizontal)")

For tting of the devices the multi-gang frame has two diagonally arranged snap mecha-

nisms (1). On the outside corners of the supporting plate the devices have corresponding

xing holes for snapping onto multi-gang frame.

Fixing holes

Snap

mechanisms

Click

Depending on the application position the multi-gang frame horizontally or vertically.

Example here: horizontal (1).

Snap the devices one after the other in the desired order on the multi-gang frame (1).

Installing the device combination into the wall box

(for example with “3gang frame (horizontal)”)

DANGER!

Touching live parts can result in an electric shock.

An electric shock can lead to death.

Disconnect the connecting cables before working on the device and

cover all live parts in the area!

Wire each device of the combination according to its wiring diagram (see installation

manual of the respective device).

Multigang frame

After wiring, x the device combination with the screws into the wall boxes ( ).2

Produktspecifikationer

Varumärke:	Hager
Kategori:	Inte kategoriserad
Modell:	WGDCH4
Färg på produkten:	Zwart
Vikt:	200 g
Bredd:	70 mm
Djup:	95 mm
Höjd:	25 mm
Användarmanual:	Ja
Husmaterial:	Metaal
Internationell säkerhetskod (IP):	IP30
LED-indikatorer:	Activity, Link, PoE, Power
Nuvarande:	0.5 A
Anslutningsteknik:	Bedraad
Inkluderar AC-adapter:	Ja
Antal Ethernet LAN (RJ-45)-portar:	1
Certifiering:	FCC A
Anslutning för nätadapter:	Ja
Inspänning:	56 V
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Nätverksstandard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Förvaringstemperatur:	-10 - 70 °C
Internera:	Nee
Våglängd:	1310 nm
Ethernet-gränssnittstyp:	Gigabit Ethernet
Maximal dataöverföringshastighet:	1000 Mbit/s
Power over Ethernet (PoE):	Ja
Maximal-räckvidd:	20000 m
Drifttemperatur (TT):	0 - 55 °C
Relativ luftfuktighet i drift (VV):	5 - 80 procent
Harmoniserad systemkod (HS):	85176990
Total Power over Ethernet (PoE) budget:	30 W
Fiberoptisk kontakt:	SC
Fiberkabeldiametrar stöds:	8/125, 8.3/125, 8.7/125, 10/125 µm
Omvandlarens ingångsgränssnitt:	1000Base-T
Duplexsystem:	Full, Half
Konverterns utgångsgränssnitt:	1000Base-LX
Fiberkanalportar:	1
Struktur för trådläge:	Single-mode