Hisense HWT3K8065B Bruksanvisning

Hisense tvättmaskin HWT3K8065B

Läs gratis den bruksanvisning för Hisense HWT3K8065B (1 sidor) i kategorin tvättmaskin. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 1.5 recensioner. Har du en fråga om Hisense HWT3K8065B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

Simple version of the wave washing

machine installation guide

Programs and Options

Clear all poc ts f loo ems, this may damage he ke o se it t

ma hine f not removedc i .

0.03

Program

Choo

texture and dirtiness of laundry.

se the appropriate washing program based on the load,

→

Wool → Spin Only → Eco → Mixed → Intensive → Tub Clean

The selection sequence is as follows: Cotton → Quick Wash

Installing the Drain Hose

NOTE: Securing the drain hose correctly

will protect the floor from damage due to

water leakage.

(30mm)

maximum

Connect the drain hose to the drain hose joint at the back of the washing machine.

Make sure to connect them firmly using the Pipe Clamp.

Install the Drain Hose with the U-Bend to a standpipe or basin.

The drain hose must not be placed higher than 120 cm above the floor,

otherwise water in the appliance may not drain or may drain slowly.

The drain hose must not be placed lower than 90 cm above the floor,

otherwise water in the appliance may flow away when water-filling, leading to an

E4 Error.

NOTE: To prevent siphoning the drain ,

hose should not extend more than 30mm

from the end of the U-Bend .

90 - 120 cm

Close the buttons and zippers, tie any ribbons, and turn the pockets inside out; remove any metal clips that could damage the laundry and washing machine

interior, or clog the drain.

Preparing the washing process

Sort the laundry by type of fabric, colour, soiling, appliance load, and allowed washing temperature (see Wash programs).

Place very sensitive clothes and small items in a special-purpose laundry washing bag.

Trouble shooting

Displayed error code

Issue

Solution

Lid is not closed.E1

Make sure lid is closed properly.

Open and close lid, then press"Start/Pause" to continue the process.

The error code will be cleared once the lid has been closed properly.