Hitachi 42HDM12A Bruksanvisning

Hitachi Övervaka 42HDM12A

Läs nedan 📖 manual på svenska för Hitachi 42HDM12A (38 sidor) i kategorin Övervaka. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/38

IMPORTANT SAFETY INSTRUCTIONS ................................................................................ 1-6

IMAGE RETENTION.....................................................................................................................7

ACCESSORIES............................................................................................................................8

HOW TO SETUP YOUR NEW HITACHI PLASMA MONITOR ............................................. 9-21

HOW TO USE REMOTE CONTROL TO CONTROL YOUR PLASMA MONITOR ............ 22-24

OSD (ON-SCREEN DISPLAY)............................................................................................. 25-29

USEFUL INFORMATION .................................................................................................... 30-37

PLASMA MONITOR

Operating Guide for 42HDM12A

English

Français

IMPORTANT SAFETY INSTRUCTIONS

SAFETY POINTS YOU SHOULD KNOW ABOUT

YOUR HITACHI PLASMA MONITOR

Our reputation has been built on the quality, performance, and ease of service of HITACHI Plasma Monitor.

Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this section

illustrates safety tips which will be of benefit to you. Please read it carefully and apply the knowledge you obtain from it to

the proper operation of your HITACHI Plasma Monitor.

Please fill out your warranty card and mail it to HITACHI. This will enable HITACHI to notify you promptly in the improbable

event that a safety problem should be discovered in your product model.

Follow all warnings and instructions marked on this plasma monitor.

WARNING: • TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PLASMA MONITOR TO RAIN OR

MOISTURE.

• THE PLASMA MONITOR SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND OBJECTS

FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THE MONITOR.

NOTE: • Model and serial numbers are indicated on back side of the Plasma Monito

CAUTION: Adjust only those controls that are covered in the instructions, as improper changes or modifications not expressly

approved by HITACHI could void the user’s authority to operate the Plasma Monitor.

MODIFICATIONS: The FCC requires the user to be notified that any changes or modifications made to this device that are not

expressly approved by Hitachi America, Ltd. Home Electronics Division may void the user’s authority to

operate the equipment.

POWER SOURCE

THIS PLASMA MONITOR IS DESIGNED TO OPERATE ON 120 VOLTS 60Hz, AC CURRENT. INSERT THE PLASMA

MONITOR POWER CORD INTO A 120 VOLT 60Hz OUTLET.

TO PREVENT ELECTRIC SHOCK, DO NOT USE THE PLASMA MONITOR’S (POLARIZED) PLUG WITH AN EXTENSION

CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES AND GROUND TERMINAL CAN BE FULLY INSERTED

TO PREVENT BLADE EXPOSURE.

NEVER CONNECT THE PLASMA MONITOR TO 50Hz, DIRECT CURRENT, OR ANYTHING OTHER THAN THE SPECIFIED

VOLTAGE.

CAUTION: Never remove the back cover of the Plasma Monitor as this can expose you to very high voltages and

other hazards. If the monitor does not operate properly, unplug the Plasma Monitor and call your

authorized dealer or service center.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s enclosure

that may be of a

sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral triangle, is intended to

alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature

accompanying

the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

CAUTION: NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the

apparatus.

IMPORTANT SAFETY INSTRUCTIONS

15. Monitors are designed to comply with the recommended

safety standards for tilt and stability.

Do not apply excessive pulling force to the front, or top, of the

cabinet which could cause the product to overturn resulting in

product damage and/or personal injury.

16. Follow instructions for wall, shelf or ceiling mounting as

recommended by the manufacturer.

17. Under no circumstances remove the rear cover of your

monitor.

Never guess or take any chances with electrical equipment o

any kind - it is better to be safe than sorry!

18. After the monitor has been on for any length of time, you will

notice that the screen becomes warm. Please note that this

is normal.

Sometimes the screen might have some tiny bright or dark

spots. Please note that this is normal.

19. To prevent scratches or damages to the Plasma screen, do

not knock or rub the surface with sharp or hard objects.

Clean the screen with a soft cloth moistened with warm

water and dry with a soft cloth. A mild soap may be used if

the screen is extremely dirty. Do not use harsh or abrasive

cleaners!

20. Use a soft cloth to clean the cabinet and control panel of the

monitor. When excessively soiled dilute a neutral detergent

in water, wet and wring out the soft cloth and afterward wipe

with a dry soft cloth.

Never use acid/alkaline detergent, alcoholic detergent,

abrasive cleaner, powder soap, OA cleaner, car wax, glass

cleaner, etc. especially because they would cause

discoloration, scratches or cracks.

Read before operating equipment

Follow all warnings and instructions marked on this monitor.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug

does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use the attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing

is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into apparatus, the

apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

This product contains lead. Dispose of this product in accordance with applicable environmental laws. For product recycling and

disposal information, contact your local government agency or the Electronic Industries Alliance at www.eiae.org (in the US) or the

Electronic Product Stewardship Canada at www.epsc.ca (in Canada). For more information, call “1-800-HITACHI.”

Do not place any objects on the top of the monitor which may fall or cause a child to climb to retrieve the objects.

PREVENTION OF SCREEN BURN

Continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and other fixed

(nonmoving) patterns can cause permanent damage to monitor receivers. Such “SCREEN BURNS” constitute misuse and are NOT

COVERED by your HITACHI Factory Warranty.

PUBLIC VIEWING OF COPYRIGHTED MATERIAL

Public viewing of programs broadcast by TV stations and cable companies, as well as programs from other sources, may require

rio

authorization from the broadcaster or owner of the video

ram material.

• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this

copyright protection technology must be authorized by Macrovis umer uses only ion Corporation, and is intended for home and other limited cons

unless otherwise authorized b

Macrovision. Reverse en

ineerin

or disassembl

rohibited.

Produktspecifikationer

Varumärke:	Hitachi
Kategori:	Övervaka
Modell:	42HDM12A
Färg på produkten:	Wit
Inbyggd display:	Nee
Vikt:	2400 g
Bredd:	299.5 mm
Djup:	220 mm
Höjd:	105.1 mm
Ljudnivå:	31 dB
Förpackningens vikt:	3500 g
Förpackningens bredd:	400 mm
Djuppackning:	297 mm
Förpackningshöjd:	155 mm
Antal lampor:	1 lampen
Typ av lampa:	UHP
Kraftkälla:	AC
Placering:	Plafond
Original bildförhållande:	16:10
Ethernet LAN:	Nee
Typiskt kontrastförhållande:	20000:1
Zoomkapacitet:	Ja
Projektorns ljusstyrka:	4000 ANSI lumens
Projektionsteknik:	DLP
Projektorns inbyggda upplösning:	WXGA (1280x800)
Keystone-korrigering, vertikal:	-40 - 40 °
Lämplig för skärmstorlekar:	2.4 - 25 "
Projektionsavståndsmål:	1 - 7.8 m
Antal färger:	1.073 biljoen kleuren
Antal USB 2.0-portar:	1
VGA (D-Sub) port(ar):	3
Antal HDMI-portar:	2
Typ av seriell anslutning:	RS-232
Kompositvideoingång:	1
Smart TV:	Nee
Diafragma (FF):	2.59 - 2.87
Brännvidd:	16.88 - 21.88 mm
Ljuskällans livslängd:	5000 uur
Typ av ljuskälla:	Lamp
Inbyggda högtalare:	Ja
Genomsnittlig effekt:	10 W
Antal inbyggda högtalare:	1
Strömförbrukning (i standby):	0.5 W
Hörlursutgångar:	1
Bildförhållanden som stöds:	4:3, 16:10, 16:9
Kastförhållande:	1.21 - 1.57:1
Full HD:	Nee
3D:	Nee
Lampkraft:	210 W
HDMI-version:	1.4a
Grafikupplösningar som stöds:	1280 x 800 (WXGA)
Ljuskällans livslängd (sparläge):	10000 uur
Ljudnivå (ekonomiläge):	27 dB
Horisontell synkronisering (min):	15 kHz
Horisontell synkronisering (max):	100 kHz
Vertikal synkronisering (min):	0.024 kHz
Vertikal synkronisering (max):	0.12 kHz
Projektionslägen:	Ceiling, Front, Rear
Projektorns ljusstyrka (ekonomiläge):	3200 ANSI lumens
Wifi:	Nee
Strömförbrukning (typiskt):	260 W
Relativ luftfuktighet i drift (VV):	0 - 85 procent
Typ produkt:	Projector met normale projectieafstand