Home Easy HE-303 Bruksanvisning

Läs gratis den bruksanvisning för Home Easy HE-303 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 8 recensioner. Har du en fråga om Home Easy HE-303 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

RE-INVENTING THE HOME

HOME

easy

HE-303 Remote

control Indoor PIR

V1.0

Installation:

The HE-303 Indoor PIR adds extra security and ease of

use to your Home Easy products

-Selectable timer setting

-Selectable Detection Range

-Veriable Light setting

-25 Metre Wire Free Range

-Battery Powered 2*AAA

The HE-303 allows you to control your

HomeEasy Receiver sockets or modules via a wire free

PIR sensor. When the PIR beam is broken the indoor PIR will switch

on your Remote control sockets or modules for between

5 seconds to 10 minutes, Ideal for controlling house hold lighting.

Compatible with all Home Easy products.

The HomeEasy Indoor PIR can be placed in any location, even in bathrooms.

Only use the adhesive strip on suitable surfaces.

Avoid placing the PIR in direct sunshine, above direct heat sources or on

metallic surfaces.

Detection Area

Detection Range:

The Indoor PIR has 3 selectable detection ranges: 1, 3 or 6 Metres.

To alter the detection range, remove the front cover and move the slide switch

to the required setting.

3. Replace the two front covers.

2. The base unit can be attached to the wall using either the adhesive strips or

screws (Included).

1. Using a small screwdriver remove the front cover and base plate.

Deleting Remote Control:

To delete the PIR from the memory of a HomeEasy receiver socket or module

control , simply press the "Learn" button. The LED will start to blink; slide the

"LEARN" switch to "DEL",, the LED will blink twice to confirm that the remote

control has been removed from the receiver sockets memory.

Pairing/Deleting with Remote Control:

Example

Up to Six remote control units can be paired with each

HomeEasy Receiver socket or module, to pair the indoor

PIR with a receiver unit, remove the front cover and,

slide the switch to DEL.

Now press the "Learn" button, the LED will start to flash, then slide the

"LEARN" switch to "SET", the units are now paired together.

Detection Angle:

The PIR detection area is 65 degrees, this can be reduced using the clip-on

covers (included). if required the covers can be cut to size.

if required the covers can be cut to size.

1.0

1 23 45 67 8

6M 6M 6M

3M 3M 3M

1M 1M1M

6M 6M 6M

3M 3M 3M

1M 1M1M

1.5

1 23 4 56 78

Detection Distance (Metres)

Height (PIR)

Produktspecifikationer