Home Easy HE-401 Bruksanvisning
Home Easy
Inte kategoriserad
HE-401
Läs gratis den bruksanvisning för Home Easy HE-401 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 4.5 recensioner. Har du en fråga om Home Easy HE-401 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
RE-INVENTING THE HOME
HOME
easy
V1.0
The HE-401and HE-402 Remote Control
Outdoor wall switchs are expansion
units for the HomeEasy range of
products and designed to work with all
the HomeEasy receiver sockets and
modules.
Additional HomeEasy receiver products
are required for the HE-401/HE-402 to
work.
S1: On/Dim
S1: Off
2Gang:
HomeEasy Remote
Control Outdoor Wall Switch
S1: On/Dim
S1: Off
1Gang:
WARNING: attaching the outdoor switch to a metallic surface will reduce
the operating distance.
Remove the switch unit from the protective casing, attach
the casing to the wall using the screws and wall plugs
provided.
Reinsert the switch unit into the protective casing making
sure the unit is the correct way up.
Switch Installation:
Deleting Remote Control:
To delete a remote control that has been paired with a HomeEasy Receiver
socket or module, simply press the "Learn" button. The LED will start to blink;
press the "Off" button on the remote control, the LED will blink twice to
confirm that the remote control has been removed from the receiver sockets
memory.
Remote Socket reset:
To delete all the remote control units from the memory of the Receiver Socket
or module, hold the "Learn" button for more than 6 seconds, the LED will start
to blink continuously. Press the learn button again, the LED will blink twice to
confirm the deletion of all remote controls form the receiver memory.
Dimming: (Compatible Receivers Only)
To dim a compatible receiver socket or module, switch the receiver on using
"On" button and then press "On" again. The unit will now start to dim, to select
the required level press "On" again.
Product Operation:
Pairing/Deleting with Remote Control:
Up to Six remote controls can be paired with each Receiver Socket or
Module. To pair the switch and socket together, press the "Learn" button. The
LED will start to flash, now press the selected "On" button on the remote
control, the LED will stop flashing. The units are now paired together, you can
test this by pressing the selected "On/Off" button.
Always refer to the original instruction when using with additional products
On/Dim
Off
Produktspecifikationer
| Varumärke: | Home Easy |
| Kategori: | Inte kategoriserad |
| Modell: | HE-401 |
Behöver du hjälp?
Om du behöver hjälp med Home Easy HE-401 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Home Easy Manualer
20 Augusti 2024
20 Augusti 2024
20 Augusti 2024
20 Augusti 2024
20 Augusti 2024
20 Augusti 2024
16 Augusti 2024
14 Augusti 2024
12 Augusti 2024
12 Augusti 2024
Inte kategoriserad Manualer
- Tumbleweed
- ATen
- Cool Head
- Saitek
- Lorex
- Sparco
- ZyXEL
- MyPOS
- MOZOS
- Zalman
- Sesame Street
- Gerni
- Livarno
- Unify
- Enertex
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025