Honeywell 5612 Bruksanvisning
Läs gratis den bruksanvisning för Honeywell 5612 (8 sidor) i kategorin Valv. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 6 recensioner. Har du en fråga om Honeywell 5612 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
Model 5612
STEEL SECURITY SAFE
Read this manual carefully and never store it inside the safe!
1
Model 5612
Steel Security Safe
PACKAGE CONTENTS
1 – Steel Security Safe
1 – Operation Manual
2 – Override Access Keys
4 – “AA” Batteries
1 – Mounting Kit w/ Bolts
ATTENTION
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your safe, please contact our Consumer Assistance
Department by telephone.
Store will not accept returned products without prior authorization. You must first contact our
consumer assistance department.
US/Canada 1- - - 877 354 5457 (Toll Free)
Mexico 01- - - 800 288 2872 After English voice recording stops you must then enter 800- -860 1677
to complete your call. (Toll Free)
Austrailia - - - 0011 800 5325 7000 (Toll Free)
Germany/New Zealand - - - 00 800 5325 7000 (Toll Free)
Other Countries - - - XX* 310 323 5722 (Toll Charges Apply)
XX*- Dial U.S. Country Code first
PRODUCT OVERVIEW
A – Open / Close knob
B - LC D Display panel
C - Safe Cabinet
D - Safe Door
E - Override Key Lock / Removable Cover
F - Electronic Digital Keypad
G - Safe Serial Number
H - -Bottom Panel Pre drilled Mounting Holes
I - -Rear Panel Pre drilled Mounting Holes
2
SETUP
STEP 1. OPEN SAFE WITH OVERRIDE KEY
1. Turn the round LCD panel turn to the left and ¼
remove. The override key lock is located behind
the removed LCD panel.
2. Insert override key and turn right to unlock safe.
3. Turn knob to right and open safe door.
STEP 2. INSTALL BATTERIES
1. Remove battery compartment (A) cover on
inside door. Insert 4 “AA” batteries (included).
Ensure the batteries are installed in the correct
direction, with regard to polarity (+ and - )
See diagram.
2. Replace the battery cover.
3. Do not close door before testing digital lock.
A
STEP 3. TEST DIGITAL LOCK
1. With door open, turn knob left to put locking door bolts in lock position.
2. Remove override key and store in a secure place.
NEVER STORE KEYS INSIDE SAFE!
3. Enter the preset pass code: “1”- – -“#”. “5” “9”
4. Turn knob to right within 5 seconds.
5. Lock bolts should recede into the unlocked position .
STEP 4. PROGRAM A NEW PASSCODE
1. Slide battery cover to the right until reset button
is uncovered.
2. Press the reset button and then the LCD will
display the symbol and you will hear 2 beeps
to indicate that the safe is in program mode.
3. Enter your new user code (2-8 digits) followed
by pressing #.
4. The LCD screen will flash your new User Code
three times and turn off automatically.
5. Replace battery cover.
NOTE: The factory pre-set code will not work after a new pass code is programmed.
OPERATION
TO OPEN THE SAFE
1. To unlock and open safe, enter the pass code followed by “# ”.
2. Turn door entry knob to the right and open door.
TO CLOSE THE SAFE
1. Close the door and hold it in the closed position.
2. Turn door entry knob to left to engage the lock bolts and lock safe.
Produktspecifikationer
| Varumärke: | Honeywell |
| Kategori: | Valv |
| Modell: | 5612 |
Behöver du hjälp?
Om du behöver hjälp med Honeywell 5612 ställ en fråga nedan och andra användare kommer att svara dig
Valv Honeywell Manualer
30 December 2025
22 September 2024
20 September 2024
20 September 2024
20 September 2024
20 September 2024
19 September 2024
17 September 2024
17 September 2024
17 September 2024
Valv Manualer
- Filex
- Perel
- MSW
- First Austria
- Kreator
- Hard Head
- Varo
- Steren
- Stamony
- Oxloc
- Technomax
- Suncast
- Sygonix
- Phoenix
- Guzzanti
Nyaste Valv Manualer
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
27 Mars 2025
1 Februari 2025
9 Januari 2025
7 Januari 2025
1 Januari 2025