Honeywell C7189R Bruksanvisning

Honeywell Termostat C7189R

Läs gratis den bruksanvisning för Honeywell C7189R (20 sidor) i kategorin Termostat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2 recensioner. Har du en fråga om Honeywell C7189R eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/20

Installation

Guide

C7189R

Wireless Indoor Sensor

Capteur d’intérieur sans fil

Sensor inalámbrico para interiores

69-2459EFS-05

Installation Guide

69-2459EFS—05

® U.S. Registered Trademark.

About your wireless indoor sensor

This sensor monitors temperature and humidity in any indoor location and transmits it

wirelessly to the thermostat.

You can set the system to monitor temperature at the thermostat, or at the sensor location,

or use an average of both to optimize comfort throughout the home. The thermostat can

use up to 6 wireless indoor sensors.

When multiple sensors are installed, the thermostat can monitor temperature and humidity

in separate locations. For example, one sensor can control humidication on the main level,

while another controls dehumidication in a crawl space. For more information, see the

instructions provided with the thermostat.

Note: The wireless indoor sensor is compatible only with RedLINK 2.0 thermostats.

Operating Ambient Temperature: 0 to 120° F (-17.8 to 48.9° C)

For Optimal Battery Life: 35 to 114° F (1.7 to 45.6° C)

Operating Relative Humidity: 5% to 90% (non-condensing)

Physical Dimensions: 2-7/8 x 1-7/8 x 15/16 inches (74 x 48 x 24 mm)

The thermostat will display a warning to replace batteries in the indoor sensor about 2 months

before power is depleted. The sensor status light will begin flashing red about 2–3 weeks before

power is depleted. During normal operation, the status light remains off.

Wireless Indoor Sensor

169-2459EFS—05

MCR32933

MCR32934 MCR32935

Install 2 fresh AAA alkaline batteries.

Status light will briefly flash green. If it

flashes red, batteries are not good.

Install batteries and link sensor to thermostat

Install batteries, then enter Wireless Setup mode at the thermostat. Press and

release the CONNECT button to link the wireless sensor to the thermostat.

Press and release CONNECT.

After a short delay, the status light

will glow green for 15 seconds.

If the status light is red, the

sensor did not link with the

thermostat. See Note.

Verify the thermostat is in the Wireless Setup

mode and the indoor sensor is at least 2 feet

away from the EIM or thermostat.

Produktspecifikationer

Varumärke:	Honeywell
Kategori:	Termostat
Modell:	C7189R
Vikt:	9390 g
Förpackningens vikt:	12180 g
Förpackningens bredd:	405 mm
Djuppackning:	425 mm
Förpackningshöjd:	305 mm
Kraftkälla:	AC
Ingångseffekt:	1200 W
Tomgångsvarvtal (max):	4500 RPM
Knivtvärsnitt:	210 mm
Dammutsug:	Ja
AC-ingångsspänning:	230 V
AC-ingångsfrekvens:	50 Hz
Sågbladstyp:	Tungsten carbide-tipped (TCT)