Honeywell Fire-Lite BG-12LSP Bruksanvisning

Honeywell Växla Fire-Lite BG-12LSP

Läs gratis den bruksanvisning för Honeywell Fire-Lite BG-12LSP (2 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 13 recensioner. Har du en fråga om Honeywell Fire-Lite BG-12LSP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

BG-12LSP Manual Pull Station

Patented, U.S. Patent No. Des. 428,351; 6,380,846; Other Patents Pending

Document 50964-3 I56-2834-001

Description

The BG-12LSP pull station is a non-coded, dual-action manual pull station with a key-lock

reset feature and dual language (Spanish/English) labeling and operating instructions. It

provides Fire•Lite control panels with one normally open (N/O) alarm initiating input.

The BG-12LSP meets the ADAAG controls and operating mechanisms guidelines (section

4.1.3[13]), and the ADA requirement for a 5 lb. maximum pull force to activate the pull

station. Molded Terminal numbers are also present.

Ratings

Switch contact (N/O) is gold plated for reliability and rated at 0.25 A at 30 volts (AC or

DC).

Installation

The BG-12LSP pull station can be surface mounted to an SB-10 or SB-I/O surface backbox

or semi-ﬂush mounted on a standard single-gang, double-gang or 4″ (10.16 cm) square

electrical box. The optional BG-TR trim ring can be used if the BG-12LSP is to be semi-

ﬂush mounted.

Operation

To activate the dual-action pull station, push in and pull down on the handle. The word

‘ACTIVATED’ appears after the handle is pulled down. This will remain until the pull sta-

tion is reset.

The pull station includes one Single Pole, Single Throw (SPST) Normally Open (N/O)

switch which closes upon activation of the pull station.

Resetting the Pull Station

1. Insert the key into the lock and rotate 1/4 turn counterclockwise.

2. Open the door until the handle returns to normal.

3. Close and lock the door.

NOTE: Closing the door automatically resets the switch to the ‘Normal’ position. Open-

ing the door will not activate or deactivate the alarm switch.

STRIP GAUGE

1 2 3 4

IDC –

FROM

FACP + TO NEXT

DEVICE

– IDC

WARNING: DO NOT LOOP WIRING

UNDER ANY TERMINALS. BREAK WIRE

RUN MAINTAIN IDC SUPERVISION.TO

P0105-00

Wiring

CAUTION! Do not detach the door of the pull station during installation. The door of

the pull station cannot be reattached to the backplate after the backplate has already been

installed onto an electrical box.

CAUTION!

Install the Fire•Lite BG-12LSP pull station in accordance with these instructions,

applicable NFPA standards, national and local Fire and Electrical codes and the requirements

of the AHJ (Authority Having Jurisdiction). Regular testing of the devices should be con-

ducted in accordance with the appropriate NFPA standards. Failure to follow these directions

may result in failure of the device to report an alarm condition. Fire•Lite is not responsible for

devices that have been improperly installed, tested or maintained.

ADA Compliance

For ADA compliance, if the clear ﬂoor space only allows forward approach to an object, the

maximum forward reach height allowed is 48 inches (121.92 cm). If the clear ﬂoor space

allows parallel approach by a person in a wheelchair, the maximum side reach allowed is

54 inches (137.16 cm).

BG-12LSP

Manual Pull Station

WARNING! Do not loop wiring under any

terminals. Break wire run to

maintain IDC supervision.

Document 50964-3 I56-2834-001

P0210-02

Produktspecifikationer

Varumärke:	Honeywell
Kategori:	Växla
Modell:	Fire-Lite BG-12LSP
Färg på produkten:	Blue, White
Antal program:	3
Tillgångar:	450 W
Typ av strömkälla:	AC
Korrekt användning:	Voet
Inspänning:	230 - 240 V
Frekvens:	50 Hz
Antal-huvuden:	3 hoofd(en)
Hitte functie:	Ja
Antal massagezoner:	1
Infraröd värme:	Ja