Honeywell THP2400A1050 Bruksanvisning

Honeywell Termostat THP2400A1050

Läs gratis den bruksanvisning för Honeywell THP2400A1050 (12 sidor) i kategorin Termostat. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2.5 recensioner. Har du en fråga om Honeywell THP2400A1050 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/12

INSTALLATION INSTRUCTIONS

33-00069EFS-04

Smart Round Thermostat Cover

Plate

TH8732 SMART ROUND THERMOSTATS AND COVER

PLATES ARE NO LONGER AVAILABLE

APPLICATION

Use the THP2400A1043 wall cover assembly with the Smart Round Thermostat.

Use the THP2400A1043 wall cover assembly to cover marks on the wall or to mount the thermostat to a 2 in. x 4

in. electrical box.

The THP2400A1043 wall cover assembly contains one wall cover, one bracket, two #6-32 x 5/8" flat head screws

and two #6-32 x 3/8" pan head screws. See Fig. 1.

Fig. 1. THP2400A1043 wall cover assembly.

INSTALLATION

When Installing this Product…

1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous

condition.

2. Check ratings given in the instructions and on the product to make sure the product is suitable for your

application.

3. Installer must be a trained, experienced service technician.

4. After installation is complete, check out product operation as provided in these instructions.

TWO #6-32 X 5/8 FLAT HEAD SCREWS

TWO #6-32 X 3/8 PAN HEAD SCREWS

BRACKET

6-3/8 (162)

3/4

(19)

M35406

SMART ROUND THERMOSTAT COVER PLATE

33-00069EFS—04 2

CAUTION

Electrical Hazard.

Can cause electrical shock or equipment damage.

Disconnect power before beginning installation.

Mount Wall Cover

Mount Wall Cover Directly to Wall (See Fig. 2)

1. Pull the wires through the wire hole on the wall cover.

2. Position the wall cover on the wall with the arrow pointing up. Check that the wall cover is leveled (for

appearance only).

3. Use a pencil to mark the mounting holes.

4. Remove the wall cover from the wall and proceed as follow:

• For drywall: Drill two 3/16-in. holes in the wall as marked. Tap the wall anchors (provided with the

thermostat) into the holes, until the anchor collar touches the wall.

• For harder surface such as plaster: Drill two 7/32-in. holes in the wall as marked. Tap the wall anchors

(provided with the thermostat) into the holes, until the anchor collar touches the wall.

5. Position the wall plate on the wall cover using the 4 mounting posts and snap them together.

6. Pull the wires through the wire hole on the wall cover / wall plate assembly. Position the assembly on the

wall anchors.

7. Insert the mounting screws (provided with the thermostat) into the wall anchors. Check leveling, if desired,

and tighten the mounting screws.

Fig. 2. Mount wall cover, wall plate and thermostat directly to wall.

MOUNTING SCREWS (2)

(PROVIDED WITH

THERMOSTAT)

M35407

WIRE HOLE

WALL COVER MOUNTING HOLES (2)

THERMOSTAT

WIRE HOLE

WALL PLATE

MOUNTING HOLES (2)

WALL

OPENING

WALL ANCHORS (2)

(PROVIDED WITH

THERMOSTAT)

DRILLED

HOLES (2)

WALL

WIRE

AUX

O/B

1 Wire

2 Wire

Universal

Hum

Dehum

Vent

R & RC

MOUNTING POSTS (4)

SMART ROUND THERMOSTAT COVER PLATE

3 33-00069EFS—04

Mount Wall Cover to a Vertical 2 in. x 4 in. Electrical Box (See Fig. 3)

1. Position the bracket on the electrical box with the arrow pointing up. Insert two #6-32 X 5/8" flat head

screws. Level the bracket and tighten the flat head screws.

2. Position the wall plate on the wall cover using the 4 mounting posts and snap them together.

3. Pull the wires through the wire hole on the wall cover / wall plate assembly. Position the assembly on the

bracket.

4. Insert two #6-32 X 3/8" pan head screws. Check leveling, if desired, and tighten the pan head screws.

Fig. 3. Mount bracket, wall cover, wall plate and thermostat to a vertical 2 in. x 4 in. electrical box.

#6-32 X 5/8 FLAT

HEAD SCREWS (2)

BRACKET

ELECTRICAL

BOX

#6-32 X 3/8” PAN

HEAD SCREWS (2)

M35408

WIRE HOLE

MOUNTING HOLES (2)

THERMOSTAT

WIRE HOLE

WALL PLATE

MOUNTING HOLES (2)

WIRE

AUX

O/B

1 Wire

2 Wire

Un ivers al

H um

Dehu m

Vent

MOUNTING POSTS (4)

WALL

COVER

Produktspecifikationer

Varumärke:	Honeywell
Kategori:	Termostat
Modell:	THP2400A1050
Färg på produkten:	Zwart
Höjd:	160 mm
Lätt att städa:	Ja
Indikator ljus:	Ja
Antihalkfötter:	Ja
Avtagbart grillställ:	Ja
Totala tillgångar:	1100 W
Non-stick beläggning:	Ja
Bakyta (BXD):	440 x 390 mm
AC-ingångsspänning:	230 V